| No | Author | Title | Source | Year |
| 1 | - | Analysis of a Three Phase Induction Motor | Application Catalog | 2006 |
| 2 | - | Analysis of the Cogging of a Permanent Magnet Linear Motor | Application Catalog | 2006 |
| 3 | - | Analysis of a Permanent Magnet Brush Motor | Application Catalog | 2006 |
| 4 | - | Sound Pressure Analysis of a Reactor | Application Catalog | 2006 |
| 6 | - | Analysis of the SR Motor Torque Ripple | Application Catalog | 2006 |
| 10 | - | Thermal Analysis of a Radiant Heater | Application Catalog | 2006 |
| 11 | - | Analysis of PM Stepper Motor's Pull-In / Pull-Out Torques using Control Simulator and JMAG-RT System | Application Catalog | 2006 |
| 13 | - | High-Frequency Induction Heating Analysis of a Drive Shaft | Application Catalog | 2008 |
| 14 | - | Inductance Analysis of a Busbar | Application Catalog | 2006 |
| 15 | - | Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet | Application Catalog | 2007 |
| 16 | - | Analysis of a Hybrid Stepper Motor | Application Catalog | 2006 |
| 17 | - | Inductance Analysis of an IPM Motor | Application Catalog | 2006 |
| 18 | - | Thermal Analysis of an IPM Motor | Application Catalog | 2006 |
| 19 | - | Analysis of the Centrifugal Force in an IPM motor | Application Catalog | 2006 |
| 20 | - | Sound Pressure Analysis of an SPM Motor | Application Catalog | 2006 |
| 21 | - | Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting | Application Catalog | 2008 |
| 22 | - | Analysis of the Eddy Current in the Magnet of an IPM Motor | Application Catalog | 2007 |
| 23 | - | Eccentricity Analysis of an IPM Motor | Application Catalog | 2007 |
| 24 | - | Cogging Torque Analysis of an SPM Motor with a Skewed Stator | Application Catalog | 2007 |
| 25 | - | Analysis of a Claw Pole Alternator | Application Catalog | 2007 |
| 26 | - | Braking Torque Analysis of an Electromagnetic Brake | Application Catalog | 2007 |
| 27 | - | Head Field Analysis of Recording Write Head with Effects of Eddy Current | Application Catalog | 2007 |
| 28 | - | Magnetic Field Analysis of a Speed Sensor | Application Catalog | 2007 |
| 29 | - | Iron Loss Analysis of an SPM Motor with Overhanging Magnet | Application Catalog | 2007 |
| 30 | - | Magnetization Analysis of an SPM Motor | Application Catalog | 2007 |
| 31 | - | Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress | Application Catalog | 2008 |
| 32 | - | Analysis of a Transformer | Application Catalog | 2007 |
| 34 | - | Demagnetization Analysis of an SPM Motor | Application Catalog | 2007 |
| 36 | - | Operating Time Analysis of an Electromagnetic Relay | Application Catalog | 2007 |
| 37 | - | Vector Control Analysis of an IPM Motor using Control Simulator and the JMAG-RT System | Application Catalog | 2007 |
| 38 | - | Starting Performance Analysis of a Single Phase Induction Motor | Application Catalog | 2007 |
| 39 | - | Torque Analysis of a Three Phase Induction Motor Accounting for the Skew | Application Catalog | 2009 |
| 40 | - | Cogging Torque Analysis of an SPM Motor | Application Catalog | 2007 |
| 41 | - | Positioning Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT System | Application Catalog | 2008 |
| 42 | - | Displacement Analysis of a Piezoelectric Actuator | Application Catalog | 2008 |
| 44 | - | Resistance Heating Analysis of a Steel Sheet | Application Catalog | 2009 |
| 45 | - | High-Frequency Induction Heating Analysis of an IH Cooking Heater | Application Catalog | 2008 |
| 46 | - | Surface Magnetic Flux Density Analysis Accounting for the Magnetization Direction | Application Catalog | 2009 |
| 49 | - | High-Frequency Induction Heating Analysis of a Steel Sheet | Application Catalog | 2008 |
| 50 | - | High-Frequency Induction Heating Analysis of a Steel Wire | Application Catalog | 2008 |
| 51 | - | High-Frequency Induction Heating Analysis of a Gear | Application Catalog | 2008 |
| 52 | - | Inductance Analysis of a Sheet Coil Transformer | Application Catalog | 2009 |
| 54 | - | Cogging Analysis of a Moving Coil Linear Motor | Application Catalog | 2008 |
| 55 | - | Magnetization Analysis of an IPM Motor | Application Catalog | 2008 |
| 56 | - | Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor | Application Catalog | 2009 |
| 58 | - | Efficiency Analysis of an IPM Motor | Application Catalog | 2008 |
| 59 | - | Iron Loss Analysis of an IPM Motor Accounting for a PWM -Direct Link- | Application Catalog | 2009 |
| 60 | - | Superimposed Direct Current Characteristic Analysis of a Reactor | Application Catalog | 2009 |
| 62 | - | Attractive Force Analysis of a Solenoid Valve | Application Catalog | 2008 |
| 63 | - | Analysis of Torque Characteristics of a Cage Induction Motor | Application Catalog | 2008 |
| 64 | - | Thrust Force Analysis of a Coreless Linear Motor | Application Catalog | 2008 |
| 65 | - | Analysis of Static Thrust of a Voice Coil Motor | Application Catalog | 2008 |
| 66 | - | Operating Time Analysis of an Injector | Application Catalog | 2008 |
| 68 | - | Analysis of a Three Phase Induction Motor for the Speed-Torque Curve | Application Catalog | 2008 |
| 69 | - | Iron Loss Analysis of an IPM Motor | Application Catalog | 2009 |
| 70 | - | Analysis of Impedance-Frequency Characteristics of a Cable | Application Catalog | 2008 |
| 71 | - | Analysis of a Slot Motor: 2 Brushes, 6 Poles, and 19 Slots | Application Catalog | 2009 |
| 72 | - | Analysis of Attractive Force between Steel Sheets and a Magnet | Application Catalog | 2008 |
| 74 | - | Speed Vs. Torque Analysis of a Single-phase Induction Motor | Application Catalog | 2009 |
| 75 | - | Iron Loss Analysis of a Reactor | Application Catalog | 2009 |
| 77 | - | Inductance Analysis of an RFID Tag | Application Catalog | 2009 |
| 78 | - | Loss Analysis of a Sheet Coil Transformer | Application Catalog | 2009 |
| 79 | - | Analysis of an Effect of Magnetic Field Orientation on Magnetization | Application Catalog | 2008 |
| 80 | - | Magnetization Analysis of an SPM Motor with a Skewed Magnet | Application Catalog | 2008 |
| 82 | - | Analysis of a Synchronous Reluctance Motor | Application Catalog | 2008 |
| 89 | - | Stiffness Torque Analysis of a PM Stepper Motor | Application Catalog | 2008 |
| 83 | - | Magnetic Shielding Analysis of an Induction Furnace | Application Catalog | 2009 |
| 85 | - | High-Frequency Induction Heating Analysis of a Constant Velocity Joint | Application Catalog | 2009 |
| 86 | - | Transmission Characteristic Analysis of an Inductive Power Supply System | Application Catalog | 2009 |
| 87 | - | Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting | Application Catalog | 2009 |
| 90 | - | Iron Loss Analysis of an IPM Motor Driven by a PWM Inverter | Application Catalog | 2009 |
| 91 | - | Iron Loss Analysis of an IPM Motor Including the Effects of the Press Fitting Stress | Application Catalog | 2009 |
| 93 | - | Cogging Torque Analysis of a Motor with 8 Poles and 9 Slots Accounting for Eccentricity | Application Catalog | 2009 |
| 94 | - | Analysis of Detent Torque of a PM Stepper Motor | Application Catalog | 2009 |
| 97 | - | Sound Pressure Analysis of a Transformer | Application Catalog | 2009 |
| 98 | - | Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT System | Application Catalog | 2009 |
| 99 | - | Superimposed Direct Current Characteristic Analysis of a High Current Reactor | Application Catalog | 2009 |
| 103 | - | Efficiency Analysis of a Permanent Magnet Synchronous Motor | Application Catalog | 2009 |
| 104 | - | Thrust Force Analysis of a Linear Induction Motor | Application Catalog | 2009 |
| 105 | - | Leakage Inductance of a Transformer | Application Catalog | 2009 |
| 106 | - | Iron Loss Analysis of a Brush Motor | Application Catalog | 2009 |
| 108 | - | Centrifugal Force Subversion Analysis of a Ring Magnet | Application Catalog | 2009 |
| 109 | - | Operating Time Analysis of an Electromagnetic Relay Accounting for Eddy Currents | Application Catalog | 2009 |
| 110 | - | Loss Analysis of a Choke Coil | Application Catalog | 2009 |
| 112 | - | Starting Thrust Force Analysis of a Linear Induction Motor | Application Catalog | 2009 |
| 113 | - | Transmission Characteristic Analysis of an Inductive Power Supply System with Opposing Cores | Application Catalog | 2009 |
| 114 | - | Vibration Analysis of an Outer Rotor Motor | Application Catalog | 2009 |
| 115 | - | Eccentricity Analysis of an SPM Motor | Application Catalog | 2009 |
| 116 | - | Operating Time Analysis of an Injector by Evaluating the Reduction in Eddy Currents | Application Catalog | 2009 |
| 117 | - | Iron Loss Analysis of a Transformer | Application Catalog | 2009 |
| 118 | - | Thermal Analysis of a Busbar | Application Catalog | 2009 |
| 119 | - | Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor | Application Catalog | 2009 |
| 120 | - | Thermal Demagnetization Analysis of an SPM Motor | Application Catalog | 2009 |
| 121 | - | Output Analysis of a Salient-Pole Synchronous Generator | Application Catalog | 2009 |
| 122 | - | Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement- | Application Catalog | 2009 |
| 123 | - | Thermal Analysis of a Choke Coil | Application Catalog | 2009 |
| 124 | - | Cogging Torque Analysis of an SPM Motor Accounting for an Varied Stator Diameter | Application Catalog | 2009 |
| 125 | - | Thrust Force Analysis of a Shaft Motor | Application Catalog | 2009 |
| 129 | - | Characteristic Analysis of a PM Stepping Motor Accounting for Magnetization | Application Catalog | 2009 |
| 131 | - | Stray Capacitance Analysis of a Motor | Application Catalog | 2009 |
| 133 | - | Thermal Analysis of a Three-phase Transformer | Application Catalog | 2010 |
| 134 | - | Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT System | Application Catalog | 2009 |
| 138 | - | Vibration Analysis of an SR Motor | Application Catalog | 2009 |
| 139 | - | Magnetic Resonance Analysis | Application Catalog | 2009 |
| 140 | - | Analysis of Electromagnetic Repulsion Produced in Small Contact Bridges | Application Catalog | 2009 |
| 143 | - | Inductance Analysis of an Air Core Coil | Application Catalog | 2009 |
| 300 | Gifu University | Recent Analysis Method of Actuators Using 3-D Finite Element Method | JMAG Users conference | 2002 |
| 301 | Shin-Daiwa-Kogyo Co.,Ltd | Electromagnetic Force Analysis of Multipule Power Source Synchronous Generator | JMAG Users conference | 2002 |
| 302 | DAIKIN AIR-CONDITIONING R&D LABORATORY,LTD | Neutral Point Signal Characteristics of IPMSM | JMAG Users conference | 2002 |
| 303 | Toyo Electric Mfg .Co.,Ltd | Examples of motor analysis using FEMAP as a pre-processor | JMAG Users conference | 2002 |
| 304 | Nissan Motor Co.,LTD | Development of a coupled simulation tool of coaxial motor driver by compound current for HEV | JMAG Users conference | 2002 |
| 305 | Shibaura Institute of Technology | Vibration and acoustic noise analysis of motor | JMAG Users conference | 2002 |
| 306 | Kawasaki Steel Corporation | Influence of Processing Strain on Iron loss of Brushiless DC motor | JMAG Users conference | 2002 |
| 307 | NKK Corp. | Non-oriented Electrical steel for high frequency motor and some points of concern for use | JMAG Users conference | 2002 |
| 308 | Nippon Steel Corporation | Developed Evalulation Technique and Iron Loss Analysis for Motor Core Applied Electrical Steel | JMAG Users conference | 2002 |
| 309 | Hoganas AB | A 3D-FEM Calculation Of a Small 3-phase permanent Magnets Generate mode of isotoropic Soft Magnetic Composit(SMC) material | JMAG Users conference | 2002 |
| 310 | Sumitomo Metal Industries, Ltd | Application Technology and Products Development of Non-oriented Electricall Steel | JMAG Users conference | 2002 |
| 317 | Kyushu Institute of Technology | Numerical Calculation of AC Loss of Superconductor | JMAG Users conference | 2002 |
| 319 | Daido Steel Co.,Ltd. | Influence of Magnetic Force Distribution on Cogging Torque of Permanent Magnet Motor | JMAG Users conference | 2002 |
| 320 | Sumitomo Special Metals CO.,LTD | Examination about the analysis method of demagnetization of a permanent magnet | JMAG Users conference | 2002 |
| 321 | Nagoya Institurte of Technology | PWM Carrier Loss Analysis for Coreless PM Motors | JMAG Users conference | 2002 |
| 322 | Toyota Motor Corporation | Magnetic calculation considering hysteresiswith Hysteron model using JMAG | JMAG Users conference | 2002 |
| 323 | Chiba Institute of Technology | Loss Analysis of Rotating Machines Considering Harmonic Electromagnetic Fields in Stator and Rotor | JMAG Users conference | 2002 |
| 324 | Nippon Steel Corporation | Electromagnetic Analysis for Motor Iron Core Considering Stress and Magnetic Anisotropic | JMAG Users conference | 2003 |
| 331 | FUJITSU GENERAL LIMITED | Calculation of starting torques of a motor of the outboard rotor type | JMAG Users conference | 2003 |
| 332 | DENSO CORPORATION | Iron loss analysis of smalll motor using JMAG | JMAG Users conference | 2003 |
| 337 | Okayama University | Toward More Effective Use of Electromagnetic Field Analysis-Factors Suffocating Extension of CAE and Provisions for them- | JMAG Users conference | 2003 |
| 342 | DAIKIN AIR-CONDITIONING R&D LABORATORY,LTD | The practical use example of the magnetic field analysis of IPMSM | JMAG Users conference | 2003 |
| 343 | Mitsubishi Electric Corporation | Cogging Torque Calculation Considering Magnetic Anisotropy for Permanent Magnet Synchronous Motors | JMAG Users conference | 2003 |
| 347 | Kyushu Institute of Technology | Expectation of the Mchatro Total Simulation System and Subjects to that Completion | JMAG Users conference | 2004 |
| 348 | Yaskawa Electric Corp. | Magnetic Field Analysis on Motor Design | JMAG Users conference | 2004 |
| 349 | Utsunomiya University | Modeling and Simulation of EMI in Power Electoronics Systems | JMAG Users conference | 2004 |
| 350 | Mitsubishi Electric Corporation | Simulation Analysis for Power Electronic Systems | JMAG Users conference | 2004 |
| 351 | Mitsubishi Electric Corporation | Practical Applications of Electro-magnetic Analysis Combined with Simulation of Drive Systems for Rotating Machines | JMAG Users conference | 2004 |
| 352 | Toyota Motor Corporation | The Motor Control Technologies for New-Generation Prius | JMAG Users conference | 2004 |
| 353 | NEOMAX CO.,LTD. | Design Method for reducing Cogging Torque | JMAG Users conference | 2004 |
| 354 | Musashi Institute of Technology | Improvement technique of Cogging Torque for PMSM | JMAG Users conference | 2004 |
| 355 | Nagoya Institute of Technology | Sensorless Control Scheme and Experimental Characteristics for Permanent Magnet Synchronous Motors | JMAG Users conference | 2004 |
| 356 | Tokyo University of Agriculture and Technology | Automatic and optimum design method of SPMSM | JMAG Users conference | 2004 |
| 357 | Gifu University | Recent Large Scale 3-D Finite Element Analysis and Applications | JMAG Users conference | 2004 |
| 358 | Chiba Institute of Technology | Loss Analysis of Rotating Machines Considering Carrier Harmonics | JMAG Users conference | 2004 |
| 360 | Osaka Prefecture University | Model Based Control for IPMSM | JMAG Users conference | 2004 |
| 363 | Polytechnic University | Magnetic characteristics analysis of bulk high-Tc superconductor using JMAG | JMAG Users conference | 2004 |
| 365 | Daido Steel Co., Ltd. | A Study on the Correlation between Core Loss andResistivity of Powder Cores | JMAG Users conference | 2004 |
| 366 | JFE Steel Corporation | Local Magnetic Properties in Operating Brushless DC Motor | JMAG Users conference | 2004 |
| 367 | Nippon Steel Corporation | Motor Core Iron Loss Analysis Evaluating Shrink Fit and Stamping Effect | JMAG Users conference | 2004 |
| 369 | Motorsoft Div & Fisher Electric Technology | 200 KW PERMANENT MAGNET ALTERNATOR ANALYSIS & COMPARISON TO TEST RESULTS | JMAG Users conference | 2005 |
| 372 | Fujitsu Ten Limited | The future trend of real time Simulation technique | JMAG Users conference | 2005 |
| 373 | Mitsubishi Electric Corporation | Comparison to Measurements of Combined Simulation with RT Model of IPM Motor | JMAG Users conference | 2005 |
| 374 | Sony Corporation | Practical Use of Connected Electro-circuit Simulation with Electromagnetic Analysis in the Development of Robot Actuator | JMAG Users conference | 2005 |
| 375 | Mie University | Analysis of RF devices using JMAG-Studio -Evaluation of transmission characteristics of RFID and RF splitters- | JMAG Users conference | 2005 |
| 377 | SANYO Seimitsu Co.,Limited | Dynamic Analysis of the PM stepping motor by behavior model and circuit simulator | JMAG Users conference | 2005 |
| 378 | Hoganas AB | 3D Design of Electrical Machines using JMAG-Studio | JMAG Users conference | 2005 |
| 379 | The University of Auckland | Electromagnetic Modelling in Teaching and Research Projects at the Unibersity of Auckland, New Zealand | JMAG Users conference | 2005 |
| 381 | NEOMAX CO.,LTD | Current Status of NdFeB Magnet and Analysis method | JMAG Users conference | 2006 |
| 382 | Nippon Steel Corporation | Resent Progress of Non-oriented Electrical Steel and Measurement Techniques | JMAG Users conference | 2006 |
| 383 | Motor Company Matsushita Electric Industrial Co.,Ltd. | Transition of IPMSM for Air-Conditioners, and a Future Trend. | JMAG Users conference | 2006 |
| 384 | Tokyo Polytechnic University | A General View of IPM Motor Control and Some Practical Examples | JMAG Users conference | 2006 |
| 385 | Tokai University | Evolution of Recent Electric Motors | JMAG Users conference | 2006 |
| 387 | Mitsubishi Electric Corporation | Motor Design Technologies Considering Detailed Magnetic Properties in Magnetic Core | JMAG Users conference | 2006 |
| 388 | Yasukawa Electric Corp. | Inductance simulation for Bus Bar | JMAG Users conference | 2006 |
| 389 | Tohoku University | Development of the In-wheel Multipolar SR motor for an Electric Vehicle based on Magnetic Circuit Method | JMAG Users conference | 2006 |
| 390 | Motion System Tech inc. | Recent Small High Power BL Motors | JMAG Users conference | 2006 |
| 391 | Panasonic Electronic Devices Co.,Ltd | Analysis of Transformer using JMAG-Studio | JMAG Users conference | 2006 |
| 392 | Matsushita Electric Works,Ltd. | Large Stroke Linear Oscillators based on Giant Magnetostrictive Material | JMAG Users conference | 2006 |
| 395 | MITSUBISHI MATHERIALS CORPORATION | Evaluation of Motors Using Powder Magnetic Cores by JMAG-Studio | JMAG Users conference | 2006 |
| 396 | Burgess-Norton Manufacturing Company | Electromagnetic and Thermal Modeling of a PermanentMagnet Synchronous Machine with Either a Laminated orSMC Stator | JMAG Users conference | 2006 |
| 397 | Daido Steel Co.,Ltd. | Magnetization Patterns and Motor Effeciency of the NEOQUENCH-DR | JMAG Users conference | 2006 |
| 398 | FUJITSU GENERAL LIMITED | The Axial Air Gap Permanent Magnet Motor for Air Conditioners | JMAG Users conference | 2006 |
| 399 | Tokyo University of Agriculture and Technology | Comparing Coupled Analysis with Experimental results for IPMSM | JMAG Users conference | 2006 |
| 400 | EMCoS | Automotive EMC Simulation Using EMC Studio | JMAG Users conference | 2006 |
| 401 | Doshisha University | Well-Developed Numerical Techniques and Future Expectation for Magnetic Field | JMAG Users conference | 2006 |
| 406 | Opal-RT Technologies Inc. | Modern Hardware-In-the Loop Simulation Technology for Fuel Cell Hybrid Electric Vehicles | JMAG Users conference | 2007 |
| 407 | SANYO Seimitsu Co.,Limited | A study on analysis of PM stepping motor | JMAG Users conference | 2007 |
| 408 | Technical University of Cluj-Napoca | Electromagnetic and Thermal Characterization of a Permanent-Magnet Tubular Machine using JMAG software | JMAG Users conference | 2007 |
| 409 | Chi-Hua Fitness Co.,Ltd. | Evaluation of the acoustic noise of DC permanent magnet motor | JMAG Users conference | 2007 |
| 410 | Toshiba Corporation | Large Torque and High Effectiency Permanent Magnet Reluctance Motor for A Hybrid Truck | JMAG Users conference | 2007 |
| 412 | Tamura Coporation | An analysis of the inductance for gapped magnet-core reactor | JMAG Users conference | 2007 |
| 414 | Meiji University | Temperature analysis og non-invasive hyperthermia system using JMAG-Studio | JMAG Users conference | 2007 |
| 415 | Hitachi Metals,Ltd. | Resent trend of the permanent magnet and the magnetic field analysis technology | JMAG Users conference | 2007 |
| 416 | JFE Steel Corporation | Appulication and possibilities of High Silicon Steels-JFE Super Core | JMAG Users conference | 2007 |
| 418 | Tokoyo University of Science | EXPERIENCES IN 3D FEM ANALYSIS | JMAG Users conference | 2007 |
| 419 | Tabuchi Electric Co.,Ltd | Demands for electromagnetic field analysis and problems specific to transformers | JMAG Users conference | 2007 |
| 434 | MURATA MACHINERY,LTD. | Efficiency improvement of non-contact power supply systems | JMAG Users conference | 2008 |
| 602 | The Japan Research Institute,Tokyo Electric Power Company | Finite element analysis of AC losses in double helix superconducting cables | IEEE TRANSACTIONS ON MAGNETICS Vol.36 No.4 p.1205(2000) | 2000 |
| 609 | The Japan Research Institute, Ltd. | Cogging Torque Analysis for a Surface Permanent Magnet Motor with a Skewed Rotor | Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, SA-04-60,RM-04-84 | 2004 |
| 612 | The Japan Research Institute, Ltd. | Cogging Torque Analysis for a Surface Permanent Magnet Motor with a Skewed Rotor Considering the Lamination Factor of Electrical Steel Sheets | Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, SA-05-21,RM-05-21 | 2005 |
| 613 | The Japan Research Institute, Ltd. | The analysis considered the off-center of rotor in permanent magnet Synchronous motor | Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, SA-06-28,RM-06-28 | 2006 |
| 614 | Tokyo University of Agriculture and Technology, NISSAN Motor Co., LTD | Design and Control of a Field Intensified interior Permanent Magnet Synchronous Machine | IEEJ Vol.126 No.7 p.827 (2006) | 2006 |
| 615 | Matsushita Electic Industrial Co., Osaka Prefecture University | Reducing Iron Loss by Decreasing Stress in Stator Core of Permanent Magnet Synchronous Motor | IEEJ Vol.126 No.7 p.852 (2006) | 2006 |
| 617 | Tokyo University of Science,Keihin Corporation,Musashi Institute of Technology,JFE Steel Corporation | Development of High Efficiency Switched Reluctance Motor | IEEJ-D Vol.126 No.4 p.511 (2006) | 2006 |
| 623 | Hanyang University,Korea Electrotechnology | Characteristic Analysis of Permanent-Magnet-Type Stepping Motor With Claw Poles by Using 3 Dimensional Finite Element Method | IEEE TRANSACTIONS ON MAGNETICS Vol.43 No.6 p.2519 (2007) | 2007 |
| 624 | Musashi Institute of Technology | Cogging Force Verification by Deforming the Shape of the Outlet Edge at the Armature of a Stationary Discontinuous Armature PM-LSM | IEEE TRANSACTIONS ON MAGNETICS Vol.43 No.6 p.2540 (2007) | 2007 |
| 626 | EPE Group, Eindhoven University of Technology, AM Group, Default University of Technology | Contactless Linear Electromechanical Actuator: Experimental Verification of the Improved Design | IEEJ-D February Vol.129 p.119 (2009) | 2009 |
| 628 | Yokohama National University | Studies on Thust Characteristic of High-Thrust Spairal Motor | IEEJ-D February Vol.129 p.130 (2009) | 2009 |
| 635 | Shibaura Institute of Technology,Toshiba Corporation | Harmonic Electromagnetic Forces in Induction Motors | IEEJ-D April Vol.129 p.375 (2009) | 2009 |
| 636 | Waseda University,Chiba University, Railway Technical Research Institute | Control Method for Harmonic Voltage Injection to Achieve Noise Reduction in Position-Sensorless Control of Permanent-Magnet Synchronuos Motors at Low Speeds | IEEJ-D April Vol. 129 p.382 (2009) | 2009 |
| 637 | Ecole Nationale Superieure d' Arts et Metiers, Lille, France,Universite des Sciences et Techniques de Lille, France Laboratoire d'Electronique de Pussance de Lille(L2EP) | Detent Force Calculations of a PMLSM Using the Finite Element Method | IEEJ-D May Vol.129 p.462 (2009) | 2009 |
| 638 | Hitachi,Ltd. | Method Based on 3D Electromagnetic Field Analysis and Electrical Circuit Analysis for Obtaining Optimal Design of Single-Phase PM Synchronous Motors | IEEJ-D May Vol.129 p.476 (2009) | 2009 |
| 639 | Mitsubishi Electric Corporation | Method for Equalizing Switching Loss of MOSFETs Caused by the Wiring Structure Connected in Parallel | IEEJ-D June Vol.129 p.622 (2009) | 2009 |
| 640 | Fuji Electric Advanced Technology Co., Ltd. , Fuji Electric Systems Co., Ltd. | A Study of Cogging Torque of 8-Pole 12-Slot PM Motor Based on Analysis and Experiment | IEEJ-D July Vol.129 p.667 (2009) | 2009 |
| 641 | Tokyo Institute of Technology,Mitsui Engineering&Shipbuilder Co.,LTD. | Dynamic Performance of a Current-Phase Control Method for Zone-Control Induction Heating Systems | IEEJ-Trans IA vol.129 No.7 p.691 (2009) | 2009 |
| 644 | Hitachi Ltd.,Hitachi Metals,Ltd.,Hitachi Powder Metals Co.,Ltd.,Hitachi Industrial Equipment Systems Co.,Ltd | Development of Claw Teeth Motor Using High-Density Soft Magnetic Composite | IEEJ-Trans IA vol.129 No.10 p.1004 (2009) | 2009 |
| 646 | Chiba Institute of Technology, Nissan Motor Co.,LTD | Development of Interior Permanent Magnet Motors with Concentrated Windings for Reducing Magnet Eddy Current Loss | IEEJ-Trans IA vol.129 No.11 p.1022 (2009) | 2009 |
| 649 | Tohoku University,Hitachi,Ltd. | A Description of a Design Method of a Claw Teeth Motor on the Basis of Three-Dimensional Reluctance Network Analysis | IEEJ-Trans IA vol.129 No.11 p.1048 (2009) | 2009 |
| 650 | Toshiba Mitsubishi Electric Industrial Systems, Nippon Institute of Technology | Investigation for the Flashover Phenomenon in DC Machines - Sastainable Voltage of DC Arc - | IEEJ-Trans IA vol.129 No.11 p.1054 (2009) | 2009 |
| 652 | Chiba Institute of Technology | Carrier Loss of Induction Motors Driven by Inverters - Comparison between Results Separated by Experiment and Field Analysis - | IEEJ-Trans IA vol.129 No.11 p.1068 (2009) | 2009 |
| 654 | Tokyo University of Science, Motor Solution | Design and Performance Evaluation of a Coreless Thrust magnetic Bearing with a Cylindrical Permanent Magnet Mover | IEEJ-Trans IA vol.129 No.11 p.1085 (2009) | 2009 |
| 655 | Tokyo Metropolitan University | Development and Evaluation of Surface Motor Using Halbach-Type Magnet | IEEJ-Trans IA vol.129 No.11 p.1133 (2009) | 2009 |
| 656 | Toshiba Corporation,Shibaura Institute of Technology, Tokyo Kikai Seisakusho,LTD | Bridge Inductance of Induction Motor with Closed Rotor Slots | IEEJ-Trans IA vol.129 No.12 p.1163 (2009) | 2009 |
| 657 | Nippon Institute of Technology | Basic Studies for Accurate Commutation Analysis which Enables Commutation Spark Energy Estimation | IEEJ-D Jan vol.130 p.60 (2010) | 2010 |
