Induction Heating

Sort condition
Newest first
Oldest first
Large number of views
  1. Shape Optimization of Induction Heating Coil by JMAG – Optimus Cooperation

    Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.

  2. Design Exploration of Heating Coil Shape by Cooperation of JMAG and HEEDS

    Hiroshi Yuki, NTN corporation

  3. Investigations in Coil Design for Induction Heating Using JMAG and the Optimization Tool HEEDS

    Toshiaki Matsumura, AW ENGINEERING CO.,LTD.

  4. [JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…

  5. [JAC183] Agitation Force Analysis of an Induction Furnace

    This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.

  6. [JAC186] Gear Induction Hardening Analysis Using Two Frequencies

    In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…

  7. [JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

    In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.

  8. Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening

    Yohei Awata, Denki Kogyo Co.,Ltd.

  9. Induction Heating Analysis Using Current Control

    Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.

  10. [JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

    In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

  11. [JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

    This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…

  12. Verification of Temperature Distribution and Thermal Strain Level with Induction Heating for Thin Plates

    Hidemasa Wakabayashi, Y-tec Corporation

  13. Computer Simulation of Double Hardened Layer Induction Hardening

    Takashi Horino, NETUREN CO., LTD.

  14. [W-SE-145] Highly Parallel Solver Performance Evaluation (Induction Heating)

    This document uses as an example an induction heating model to evaluate the performance of the highly parallel solver. As a result, it was found that even in thermal-magnetic fiel…

  15. Dai-ichi Kiden Co.,Ltd.

    Providing customers with all new devices. Better products, faster service. Understanding the process one step at a time. New challenges with JMAG.

  16. JMAG Analysis of Spot Induction Heating to Design a Soldering Head

    Takeshi Usuda, S-FINX Technologies

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website