Optimization

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation

    In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…

  2. [JAC233] Induction Heating Coil Optimization

    In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.

  3. [JAC252] Geometry Optimization of a Solenoid Valve

    In this example, an example where the geometry of a solenoid valve is optimized using a multi-objective optimization algorithm is presented.

  4. [JAC257] IPM Motor Topology Optimization

    In this example, rotor core maximum stress and radial direction maximum displacement in the radial direction are set to certain values or less, and rotor geometry is designed that…

  5. [JAC190] Arrangement Optimization of Wireless Power Transfer System

    This document introduces the procedure in obtaining the optimum solution for geometries of transmission coils (angle that defines position) for simple magnetic resonance wireless …

  6. [JAC236] Magnetic Circuit Optimization for Plastic Magnets in an Axial Magnetic Field

    In this example, a use case is presented in which a magnetic circuit of a product-forming mold, in a magnetic field aligned with the mold’s main axis, is optimized, with the mold’…

  7. [JAC268] SPM Motor Teeth Geometry Topology Optimization

    In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…

  8. [JAC247] Magnetic Circuit Optimization for Plastic Magnets in a Radial Magnetic Field

    In this example, a use case of magnetic circuit optimization in a metal mold with radial magnetic field orientation used for ring-shaped magnet production is presented.

  9. [JAC261] SPM Motor Magnet Coercive Force Optimization For Obtaining Sinusoidal Magnetization

    In this example, a magnet is segmented into blocks and coercive force is defined. The coercive force of each block is calculated so that the induced voltage waveform approaches a …

  10. [JAC267] IPM Motor Topology Optimization Using the Density Method

    Magnetic field and structural coupled analysis is run in this example. While accounting for rotor core strength, topology optimization that uses the density method is used to perf…

  11. [JAC258] Magnetic Shield Geometry Optimization

    In this example, a case study in which the geometry of a magnetic shield is optimized using topology optimization that uses a sensitivity analysis (density method) is presented. D…

  12. [JAC280] Topology Optimization of Induction Heating Coil

    In this example, magnetic field and thermal coupled analysis is run, and using topology optimization, searches are performed for a heating coil that maximizes the power factor and…

  13. [JAC288] Synchronous Reluctance Motor Topology Optimization

    In this example, topology optimization is used to minimize the torque ripple and maximize the average torque when exploring the rotor geometry.

  14. [JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models

    In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website