Stress Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
Show 1 to 9 of 9
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation
In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
-
[JAC263] IPM Motor Stress Analysis Taking Into Account Friction between Magnets and the Rotor Core
In this example, in order to evaluate how the contacts between the magnets and the rotor core in an IPM motor affect the stress distribution, the von Mises stress is checked when …
-
[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
[JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature and Stress
In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.
Show 1 to 9 of 9
