DP

Transient Magnetic (2D/Axisymmetric)

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC003] Analysis of a Permanent Magnet Brush Motor

    This document introduces how the characteristics of the brush-type PM motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux de…

  2. [JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting

    This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.

  3. [JAC006] Analysis of the SR Motor Torque Ripple

    This Application Note explains how to carry out a torque analysis that changes the switch conversion timing and evaluate both the torque ripples and average torque in an SR motor.

  4. [JAC023] Eccentricity Analysis of an IPM Motor

    This Application Note presents how to obtain variations in electromagnetic force according to changes in the amount of rotor eccentricity.

  5. [JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew

    This Application Note presents a comparison of the torque waveforms of three phase squirrel cage induction motors with and without torque, and introduces the effects of using skew…

  6. [JAC040] Cogging Torque Analysis of an SPM Motor

    This Application Note presents the use of magnetic field analysis to obtain the cogging torque of an 8-pole, 9-slot SPM motor, which has relatively small period.

  7. [JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress

    This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.

  8. [JAC041] Positioning Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT

    This Application Note presents how to use the JMAG-RT to obtain the space harmonics and current dependency of the thrust and coil inductance and import them to a circuit/control s…

  9. [JAC062] Attractive Force Analysis of a Solenoid Valve

    This Application Note obtains the attraction force at each position of the movable core.

  10. [JAC068] Speed Versus Torque Characteristic Analysis of a Three-Phase Induction Motor

    This Application Note explains an analysis that confirms the Speed-Torque curve and current density distribution of an induction motor.

  11. [JAC058] Efficiency Analysis of an IPM Motor

    This Application Note presents the use of magnetic field analysis to obtain the efficiency of an IPM motor in each current phase with a rotation speed of 1800 rpm and the current …

  12. [JAC082] Analysis of a Synchronous Reluctance Motor

    This Application Note presents an evaluation of torque variations that occur when the phase of a sinusoidal wave current is changed.

  13. [JAC055] Integrated Magnetization Analysis of an IPM Motor

    This Application Note explains how to determine the changes that occur in a magnetizing field if the making current is changed during magnetization, as well as how to obtain the i…

  14. [JAC095] Analysis of a Universal Motor

    This note presents how the characteristics of a universal motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux density distri…

  15. [JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor

    This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …

  16. [JAC069] Iron Loss Analysis of an IPM Motor

    This Application Note explains a case example that obtains the iron loss and its distribution in a permanent magnet motor.

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website