FQ
Time Harmonic Magnetic (2D/3D)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC083] Magnetic Shielding Analysis of an Induction Furnace
This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[JAC233] Induction Heating Coil Optimization
In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC070] Analysis of Impedance-Frequency Characteristics of a Cable
This Application Note explains how to obtain the frequency characteristics of the resistance and inductance in twisted pair cables.
-
[JAC199] Efficiency Analysis of Wireless Power Transfer via Electromagnetic Induction Method using Resonance Circuits
This example presents, an electromagnetic induction-type wireless power supply system using an excitation circuit positioned with a parallel resonance condenser on the receiving e…
-
[JAC202] Core Stray Loss Analysis of Power Transformer
This document introduces runs analysis by modeling the short-circuit test that is conducted when evaluating stray loss and obtains stray loss distribution in the core close to the…
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC112] Starting Thrust Force Analysis of a Linear Induction Motor
This Application Note presents how to obtain the starting thrust force for a linear inductance motor.
-
[JAC193] Calculation of Equivalent Circuit Parameters of Single-Phase Induction Motors
In this document, we will be obtaining the secondary resistance, leakage inductance and excitation inductance of main winding of capacitor-start single-phase induction motor that …
-
[JAC185] Analysis of Stray Loss in a Power Transformer
This note obtains loss distribution for each component in drive condition and checks local overheating.
-
[JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…
-
[JAC014] Inductance Analysis of a Bus Bar
This note presents a case study on the current distribution and the frequency versus inductance characteristic of the bus bar.
-
[JAC166] Line Start Simulation of an Induction Machine Using a Control Simulator and the JMAG-RT
This Application Note explains how to use the JMAG-RT to create a JMAG-RT model of an induction motor, import it to a circuit/control simulator, and run an induction motor line st…
-
[JAC118] Thermal Analysis of a Bus Bar
This Application Note presents how to obtain the temperature distribution in a bus bar or the like with changes in the power supply frequency.
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
