FQ
Time Harmonic Magnetic (2D/3D)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC014] Inductance Analysis of a Bus Bar
This note presents a case study on the current distribution and the frequency versus inductance characteristic of the bus bar.
-
[JAC045] High-Frequency Induction Heating Analysis of an IH Cooking Heater
This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…
-
[JAC013] High-Frequency Induction Heating Analysis of a Shaft
This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…
-
[JAC051] High-Frequency Induction Heating Analysis of a Gear
This Application Note shows how to create a numerical analysis model when obtaining the optimum coil geometry and current conditions (power supply frequency and current value), an…
-
[JAC085] High-Frequency Induction Heating Analysis of a Constant Velocity Joint
This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…
-
[JAC086] Power Transmission Analysis of a Wireless Power Transfer System
This Application Note presents how to obtain the power transmission efficiency when the feeder wire’s position is moved in both the horizontal and vertical directions from a refer…
-
[JAC050] High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…
-
[JAC049] High-Frequency Induction Heating Analysis of a Steel Sheet
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…
-
[JAC047] High-Frequency Induction Heating Analysis of a Crankshaft
This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…
-
[JAC063] Analysis of Torque Characteristics of a Cage Induction Motor
This Application Note introduces a case example that obtains the Slip-Torque curve, Torque-Current curve, Current-Voltage curve at maximum torque, and the Current-Joule Loss curve…
-
[JAC070] Analysis of Impedance-Frequency Characteristics of a Cable
This Application Note explains how to obtain the frequency characteristics of the resistance and inductance in twisted pair cables.
-
[JAC053] Magnetic Shielding Analysis of a Shield Room
This Application Note explains how to handle the magnetic shielding phenomena used by the shield room when an external magnetic field is applied, and from there how to confirm the…
-
[JAC083] Magnetic Shielding Analysis of an Induction Furnace
This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.
-
[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller
This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…
-
[JAC100] Surface Heating Analysis of a Steel Plate
This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …
-
[JAC075] Iron Loss Analysis of a Reactor
This Application Note analyzes the iron loss of a reactor.
