[JAC289] Efficiency Map Creation for Wound-Field Synchronous Motors

DownloadVersionSize (KB)Application Note -515Model Data JMAG-Designer 22.2712Case

[JAC289] Efficiency Map Creation for Wound-Field Synchronous Motors

In this example, efficiency maps for a wound-field synchronous motor are created to check the combinations of currents that result in maximum efficiency. In addition, the loss bre…

• Applications: Motor and Wound-Field Synchronous Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency map

[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor

DownloadVersionSize (KB)Application Note -601Model Data JMAG-Designer 22.125,202Case

[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor

This Application Note explains a case example that obtains the superimposed direct current characteristics of a high-frequency reactor when the gap width is changed.

• Applications: Transformer / Reactor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)

DownloadVersionSize (KB)Application Note -770Model Data JMAG-Designer 13.0270Case

[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)

A magnetic field analysis simulation based on the finite element method (FEM) can precisely evaluate the complex loss distributions of the coil and core, so it is optimal for an a…

• Applications: Transformer / Reactor
• Module: DP, LS, ST, and TS
• Physical Phenomena: Magnetic Field

[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets

DownloadVersionSize (KB)Application Note -1,344Model Data JMAG-Designer 22.02,527Case

[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets

In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…

• Applications: IPM Motor and Motor
• Module: DP and ST
• Physical Phenomena: Magnetic Field and Material
• Technical Themes: Multiphysics

[JAC203] No-Load Test Analysis of Power Transformer

DownloadVersionSize (KB)Application Note -3,888Model Data JMAG-Designer 23.0789Case

[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-

DownloadVersionSize (KB)Application Note -651Model Data JMAG-Designer 22.02,960Case

[JAC034] Demagnetization Analysis of an SPM Motor

DownloadVersionSize (KB)Application Note -594Model Data JMAG-Designer 21.1571Case

[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-

This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.

• Applications: IPM Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC034] Demagnetization Analysis of an SPM Motor

This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field and Material

[JAC203] No-Load Test Analysis of Power Transformer

This example focuses on modeling in the analysis of no-load tests in JMAG and obtains the magnetic flux line, current, excitation conductance, and excitation susceptance that can …

• Applications: Transformer / Reactor
• Module: FQ and LS
• Physical Phenomena: Magnetic Field

[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models

DownloadVersionSize (KB)Model Data JMAG-Designer 23.020,126Case

[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors

DownloadVersionSize (KB)Model Data JMAG-Designer 23.08,335Case