LS

Iron Loss Calculation

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting

    This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.

  2. [JAC029] Iron Loss Analysis of an SPM Motor with Overhanging Magnet

    This Application Note presents the use of a no-load iron loss analysis of an SPM motor with and without an overhanging magnet.

  3. [JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress

    This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.

  4. [JAC058] Efficiency Analysis of an IPM Motor

    This Application Note presents the use of magnetic field analysis to obtain the efficiency of an IPM motor in each current phase with a rotation speed of 1800 rpm and the current …

  5. [JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor

    This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …

  6. [JAC069] Iron Loss Analysis of an IPM Motor

    This Application Note explains a case example that obtains the iron loss and its distribution in a permanent magnet motor.

  7. [JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-

    In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.

  8. [JAC075] Iron Loss Analysis of a Reactor

    This Application Note analyzes the iron loss of a reactor.

  9. [JAC110] Loss Analysis of a Choke Coil

    This Application Note shows how to obtain the iron loss and copper loss in a choke coil.

  10. [JAC117] Iron Loss Analysis of a Transformer

    This Application Note presents how to obtain the iron loss and the ratio of hysteresis loss and joule loss within that iron loss for a three-phase transformer.

  11. [JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting

    This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…

  12. [JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress

    This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…

  13. [JAC106] Iron Loss Analysis of a Brush Motor

    This note presents how to obtain the iron loss in the stator core and rotor core of a brush motor.

  14. [JAC078] Loss Analysis of a Sheet Coil Transformer

    This Application Note shows how to obtain the iron loss of a sheet coil transformer.

  15. [JAC132] Loss Analysis of a Three-phase Transformer

    This note presents how to obtain the iron and copper losses of a three-phase transformer.

  16. [JAC146] Analysis of Stray Loss in a Transformer

    This Application Note explains how to obtain losses in a transformer tank and use them to evaluate the temperature distribution in each part.

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website