Optimization
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC257] Topology Optimization of an IPM Motor
This case study runs a topology optimization to minimize torque ripple and maximize average torque with the maximum stress on the rotor core and maximum radial displacement below …
-
[JAC261] SPM Motor Magnet Coercive Force Optimization For Obtaining Sinusoidal Magnetization
In this example, a magnet is segmented into blocks and coercive force is defined. The coercive force of each block is calculated so that the induced voltage waveform approaches a …
-
[JAC268] SPM Motor Teeth Geometry Topology Optimization
In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…
-
[JAC267] IPM Motor Topology Optimization Using the Density Method
Magnetic field and structural coupled analysis is run in this example. While accounting for rotor core strength, topology optimization that uses the density method is used to perf…
-
[JAC252] Geometry Optimization of a Solenoid Valve
In this example, an example where the geometry of a solenoid valve is optimized using a multi-objective optimization algorithm is presented.
-
Optimal Design of Instantaneous High-output Motor for Basketball Robots
Yoshihiro Okumatsu, TOYOTA MOTOR CORPRATION
-
[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
[JAC233] Induction Heating Coil Optimization
In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.
-
[W-OP-166] Sensitivity Study of Configuration of Large Scale Multi-Objective Optimization of a PMSM
The feasible solution space of large scale multi-objective optimization schemes is sensitive to the configuration (population size, objectives, constraints, and design variables).
-
Vibration Prediction of Permanent Magnet Synchronous Motors by Aid of JMAG
Toru Mizota, YANMAR HOLDINGS CO., LTD.
-
[W-OP-165] Solving Geometry Conflicts in GA Optimizations with Large Numbers of Geometric Parameters
Genetic Algorithm (GA) based optimization with finite element analysis is expected to become a solution for high performance motor designs which need to satisfy many strict requir…
-
[W-OP-96] Necessity of GA for Multi-Objective Optimization of Drive Motor
In this paper, the multi-objective optimization calculation has 12 design variables (8 geometric variables, 4 circuit variables) with 6 objective functions (maximize torque, minim…
-
Low Oscillation Actuator for Force-controlled Medical Robot Arm
Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.
-
Performance Analysis Method of IPM Motor for EV Using Electromagnetic Simulation(JMAG)
Yoshihisa Kubota, Honda R&D Co.,Ltd
-
[L-OP-03] Multi-Objective Optimization with JMAG
It is even possible to analyse the relationship between design variables and response values in a correlation graph by visualizing the design space from optimization calculation r…
-
Multi-objective optimization with wide-range shape parametric design space for IPM motor
Norio Tomiya, Aisin AW Co., Ltd.
