Technical Library


What's New   /   Search

Introduction of Newest Papers

EM Engineer's Recommendations and Introduction of Useful Papers.

No.1027
Yoshitaka Kida*, Hirokatsu Katagiri, Kensuke Matsunaga, Kazuki Semba, Hiroyuki Sano, Yusaku Suzuki, Koji Tani, Takashi Yamada: "An Evaluation of Genetic Algorithm for Multi-Objective Design Optimization of Electromagnetic Device", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-100 / RM-15-138, 2015
This paper is discribed that the multi-objective optimization of interior parmanent magnet motor by using genetic algorithm.
The distributed processing systems are used in the calculation, and their scalabilities are clarified.
...more






...more



No.1024
Masahiko Miwa*, Kazuki Semba, Koji Tani, Takashi Yamada: "Improvement of the convergence characteristics for strongly coupled electromagnetic and circuit analysis", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-082 / RM-15-120, 2015
In this paper, we describe an approach to improve the convergence characteristics of the linear iterative method for analysis of strongly coupled electromagnetic fields and circuits.
...more



No.1023
Tatsuya Asanuma, Kazuki Semba, Katsuyuki Narita, Takashi Yamada: "Investigations on problems in 2D FEM for eddy current loss estimation in an electromagnetic steel sheet", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-079 / RM-15-117, 2015
Several methods have been proposed to calculate the eddy current loss in an electromagnetic steel sheet based on 2D FEM, and this method is said to be highly accurate especially when combined with 1D FEM.
...more



Search

Useful technical documents for your work can be searched in this library.
Search target documents include analysis case studies from JMAG and papers on electromagnetic field analyses.
(Please visit the site of original documents to refer to the actual papers.)
Enter a keyword in the field below. Retrieved items are displayed.

Records - of reset  
No
Title
Recommendation
1087Berker Bilgin: "Acoustic Noise Analysis of a High-Speed High-Power Switched Reluctance Machine: Frame Effects", JMAG Users conference 2015 in USA, 2015-
1086Khwaja Rahman: "High Performance Electric Machine for Hybrid, Electric, and Fuel Cell Vehicle: Electromagnetic Design and Analysis", JMAG Users conference 2015 in USA, 2015-
1085Zhong xiulin: "Introduction of the two development platform of JMAG", JMAG Users conference 2015 in China, 2015-
1084Tetsuya Hattori: "Optimization and Simulation of JMAG and modeFrontier", JMAG Users conference 2015 in China, 2015-
1083Li xin: "Induction Motor Sound and Co-simulation with JMAG and Virtual.lab", JMAG Users conference 2015 in China, 2015-
1082Qiu huajing: "JMAG in RT-Lab HIL Simulator", JMAG Users conference 2015 in China, 2015-
1081Xiong haifang: "Stator of variable speed permanent magnet synchronous motor based on Designer JMAG -Study on the calculation of optimal skew slot angle-", JMAG Users conference 2015 in China, 2015-
1080Hiroyuki Sano: "The application of JMAG in hybrid electric vehicle", JMAG Users conference 2015 in China, 2015-
1079Zhou Wangjing: "Optimization calculation of JMAG and its application in proportional solenoid valve", JMAG Users conference 2015 in China, 2015-
1078Zeng jingling: "The thermal field simulation analysis of the JMAG platform for the FAW Technology Center", JMAG Users conference 2015 in China, 2015-
1077Tetsuya Hattori: "Introduction of JMAG-Express", JMAG Users conference 2015 in China, 2015-
1076Hiroyuki Sano: "Introduction of the latest version of JMAG", JMAG Users conference 2015 in China, 2015-
1075Eduardo E. Montalvo-Ortiz: "Customer case: Computation of no-loadtorque for slotlessmachine withnon-cylindricalairgap", JMAG Users conference 2015 in Germany, 2015-
1074Kassem Roumani: "Design of interior permanent magnet synchronous motor with JMAG-Designer and JMAG-RT", JMAG Users conference 2015 in Germany, 2015-
1073Andrea Vezzini: "sunlight? pump - a small solar powered water pump developed using the JMAG toolchain", JMAG Users conference 2015 in Germany, 2015-
1072Stephan Paul: "Optimization of Electric Motors for Automotive Applications", JMAG Users conference 2015 in Germany, 2015-
1071Marcel Lehr: "Design and parametric modelling of a synchronous reluctance machine", JMAG Users conference 2015 in Germany, 2015-
1070Tim Miller: "The electric machine designer in the 21st century", JMAG Users conference 2015 in Germany, 2015-
1069Takashi Yamada: "JMAG: Recent developments and roadmap", JMAG Users conference 2015 in Germany, 2015-
1068Vincent CAPRON: "Opening remarks, POWERSYS", JMAG Users conference 2015 in Germany, 2015-
1067Ben Black: "Future of Tools for Real-Time Test", JMAG Users conference 2015, 2015-
1066Yoshihiko Ozki: "JMAG-RT Running in a 260mm×190mm×84mm Box", JMAG Users conference 2015, 2015-
1065Atsuo Nakata: "JMAG Parallel Execution Environment using a PC Cluster", JMAG Users conference 2015, 2015-
1064Koichi Shigematsu: "2-Step Multi Objective Optimization of EV System by 1D and 3D Integration", JMAG Users conference 2015, 2015-
1063Koen De Langhe: "On the modeling, prediction and solutions for acoustic emission of Reluctance Machines (RM)", JMAG Users conference 2015, 2015-
1062Masanari Ueda: "From circuit to virtual integrated system, Model-Based reliability verification and analysis", JMAG Users conference 2015, 2015-
1061Taiki Matsumura: "Innovative process of design exploration using JMAG and HEEDS", JMAG Users conference 2015, 2015-
1060Takashi Yamada: "JMAG's responses to user proposals", JMAG Users conference 2015, 2015-
1059Takaya Inamori: "In-orbit magnetic attitude disturbance in LEO small satellites", JMAG Users conference 2015, 2015-
1058Hiroshi Matsumoto: "The design of magnetic circuit for magnetostrictive sensor", JMAG Users conference 2015, 2015-
1057Akira Ide: "Applying HILS in the Development of Sensorless Motor Control", JMAG Users conference 2015, 2015-
1056Tomohiro Morita: "Applied Cases of Control Development and Verification for Motor HILS using JMAG-RT", JMAG Users conference 2015, 2015-
1055Shinya Urata: "Measurement and evaluation for the iron loss of electrical steel sheets considering the compressive stress.", JMAG Users conference 2015, 2015-
1054James R Dorris: "Propulsion System Linear Motor: Optimization using HEEDS + JMAG", JMAG Users conference 2015, 2015-
1053Xavier JANNOT: "Evaluation of performances of a PMSM taking into account the impact of the lamination cutting", JMAG Users conference 2015, 2015-
1052Hiroyuki Sano: "Evaluation of Iron Loss Analysis and Material Modeling Accounting for Residual Strain", JMAG Users conference 2015, 2015-
1051Hideaki Ueda: "Analytical Predictions for Residual Stress in Crankshaft Subjected to Induction Hardening", JMAG Users conference 2015, 2015-
1050Masaki Takeuchi: "Metal Induction Heating Analysis with Two-Way Coupling of JMAG and STAR-CCM+", JMAG Users conference 2015, 2015-
1049Hiroshi Yuki: "Feedback control assisted IH analysis", JMAG Users conference 2015, 2015-
1048Ju, Dong-Ying: "Development and Experimental Verification of Simulation Code on Induction Heat Treatment Process", JMAG Users conference 2015, 2015-
1047Seigo Taku: "Eddy Current Loss Evaluation and Temperature Rise Verification of Stator Core Clamping Stud Bolts in Alternating Current Rotational Machines", JMAG Users conference 2015, 2015-
1046Nobuyuki Shimbo: "Thermal Demagnetization Analysis of Neodymium-Iron-Boron Sintered Magnets With Non-Uniform Coercivity Distribution by Diffusing Heavy Rare Earth Element Using JMAG", JMAG Users conference 2015, 2015-
1045Tadashi Sonobe: "Some JMAG Designing Technique on IPMSM under a Magnet-Saving Scheme", JMAG Users conference 2015, 2015-
1044Yoshiyuki Sakashita: "Study on the Application of the JMAG Optimization Function in Motor Design", JMAG Users conference 2015, 2015-
1043T.J.E. Miller: "The Electric Machine Designer in the 21st Century", JMAG Users conference 2015, 2015-
1042Masayuki Kawai: "Useful Tips for JMAG-Designer", JMAG Users conference 2015, 2015-
1041Hiroaki Yuasa: "Electromagnetic design method of wireless charging coil mounted under a vehicle", JMAG Users conference 2015, 2015-
1040Tomio Yasuda: "Development of a wireless power transfer technology and electromagnetic field analysis", JMAG Users conference 2015, 2015-
1039Takehiro Imura: "Introduction to the Difference between Electromagnetic Induction and Magnetic Resonance Coupling", JMAG Users conference 2015, 2015-
1038Kouta Yamahaku: "JMAG Case Study Presentation for Developing Electric Components of a Motorcycle Engine", JMAG Users conference 2015, 2015-
1037Shin-ya Tanaka: "Coupled Thermal/Structural/Magnetic Field Analysis Using JMAG", JMAG Users conference 2015, 2015-
1036Toshihisa Abe: "The effort of fast numerical simulation of large scale electromagnetic field analysis", JMAG Users conference 2015, 2015-
1035Ryosuke Tan: "Starting performance analysis of solid salient poles synchronous motor by Finite Element Method", JMAG Users conference 2015, 2015-
1034Kiyoshi Wakimoto: "Noise and Vibration of Oil-Immersed Transformer Generated by Load Current", JMAG Users conference 2015, 2015-
1033Taiga Komatsu: "Analysis of a Claw Pole Rotating Machine Regeneration", JMAG Users conference 2015, 2015-
1032Wenying Jiang: "Multi-Physics Machine Design Optimization Based on Finite Element Analysis Using High-Throughput Computing", JMAG Users conference 2015, 2015-
1031David Philipp Morisco: "Electromagnetic-thermal coupled multi-objective optimization on HPC systems for rotating electrical machines used in phev applications", JMAG Users conference 2015, 2015-
1030Bernd Cebulski: "Optimization of Traction Motors for Automotive Applications using High-Performance Computing", JMAG Users conference 2015, 2015-
1029Hajime Igarashi: "Optimal Design Using Computational Electromagnetism", JMAG Users conference 2015, 2015-
1028Takashi Yamada: "Development planning of JMAG", JMAG Users conference 2015, 2015-
1027Yoshitaka Kida*, Hirokatsu Katagiri, Kensuke Matsunaga, Kazuki Semba, Hiroyuki Sano, Yusaku Suzuki, Koji Tani, Takashi Yamada: "An Evaluation of Genetic Algorithm for Multi-Objective Design Optimization of Electromagnetic Device", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-100 / RM-15-138, 2015
1026Katsuyuki Narita, Takashi Yamada, Hiroyuki Sano, Noriyo Mimura, Kan Akatsu, Kazuki Ueta: "Study of material modeling considering effect of distortion by cutting process", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-095 / RM-15-133, 2015
1025Kazuki Senba*, Koji Tani, Takashi Yamada, Takeshi Iwashita, Yasuhito Takahashi, Hiroshi Nakashima: "Investigation of Convergence Characteristics of ICCG Method Based on Algebraic Block Multi-color Reordering to Finite Element Electromagnetic Field Analyses", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-083 / RM-15-121, 2015
1024Masahiko Miwa*, Kazuki Semba, Koji Tani, Takashi Yamada: "Improvement of the convergence characteristics for strongly coupled electromagnetic and circuit analysis", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-082 / RM-15-120, 2015
1023Tatsuya Asanuma, Kazuki Semba, Katsuyuki Narita, Takashi Yamada: "Investigations on problems in 2D FEM for eddy current loss estimation in an electromagnetic steel sheet", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-079 / RM-15-117, 2015
1022Sarp G. Cimen, Alexander Pfannkuchen, Benedikt Schmuelling: "Compensation Considerations for Bidirectional Inductive Charging Systems of Electric Vehicles with Coil Positioning Flexibility", Compumag 2015, 2015-
1021Hiroyuki Sano*, Takayuki Nishio, Koji Tani, Takashi Yamada: "In-plane eddy current loss analysis of power transformers at short-circuit test", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-039/RM-15-031, 2014
1020Katsuyuki Narita*, Hiroyuki Sano, Tatsuya Asanuma, Takashi Yamada: "Validation of iron loss calculation by post-processing method", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-06-10/RM-06-10, 2014
1019Masahiko Miwa*, Kazuki Semba, Koji Tani, Takashi Yamada: "Investigation of Hybrid CPU-GPU Computing for Electromagnetic Field Analysis", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-15-009/RM-15-001, 2014
1018Chun-Yu Hsiao, Shang-Chih Lin: "Design and analysis of high-performance small wind generators and integrated assessment in Taiwan (Chinese-only)", JMAG Users conference 2014 in Taiwan, 2014-
1017Zwe-Lee Gaing: "Optimal design and performance analysis of an ironless permanent-magnet linear motor (Chinese-only)", JMAG Users conference 2014 in Taiwan, 2014-
1016Sheng-Yang Lin: "Properties variations and influence evaluations of the electrical steel after motor manufacturing processes using JMAG (Chinese-only)", JMAG Users conference 2014 in Taiwan, 2014-
1015Chien Ming-Hung: "The application for JMAG in magnetizing yoke-aided design (Chinese-only)", JMAG Users conference 2014 in Taiwan, 2014-
1014Min-Fu Hsieh: "Design and analysis of synchronous reluctance motors (Chinese-only)", JMAG Users conference 2014 in Taiwan, 2014-
1013Min-Fu Hsieh: "Design and analysis of flux-switching permanent magnet motor (Chinese-only)", JMAG Users conference 2014 in Taiwan, 2014-
1012Marcel Lehr: "Comparison of axial-flux and radial-flux-machines for use in wheel-hub-drives", JMAG Users conference 2014 in Germany, 2014-
1011Bernd Cebulski: "Use of JMAG in automotive applications", JMAG Users conference 2014 in Germany, 2014-
1010Markus Ozbek: "JMAG-RT as a tool in the development of EV/HV powertrain components ", JMAG Users conference 2014 in Germany, 2014-
1009Bassel Aslan: "Comparison between 5 and 6 Phases Claw Pole Alternator", JMAG Users conference 2014 in Germany, 2014-
1008Liam Naugher: "Design of a large tidal generator", JMAG Users conference 2014 in Germany, 2014-
1007Takashi YAMADA: "Recent developments and roadmap", JMAG Users conference 2014 in Germany, 2014-
1006Yusuke Minami: "Model-based development of PMSM control systems", JMAG Users conference 2014, 2014-
1005Yoshihiko Ozaki: "Motor control improved by using JMAG-RT", JMAG Users conference 2014, 2014-
1004Koji Fukusumi: "JMAG solution: Higher fidelity motor HILS of FPGA-based by model-based development", JMAG Users conference 2014, 2014-
1003Kurt Mueller: "Virtual motor-drive development & validation platform suite : SaberRD + JMAG-RT", JMAG Users conference 2014, 2014-
1002Takanori Watanabe: "Vibration problems in mechanical systems driven by electric motor", JMAG Users conference 2014, 2014-
1001Eiichi Odaira: "Power measurement technique for inverter and motor evaluation", JMAG Users conference 2014, 2014-
1000Takashi Yamada: "JMAG's responses to user proposals", JMAG Users conference 2014, 2014-
999Masato Kabetani: "Accuracy evaluation of litz wire resistance by using transformer analysis module", JMAG Users conference 2014, 2014-
998Takahiro Tera: "Gap loss analysis of cut core inductor", JMAG Users conference 2014, 2014-
997Yuji Sato: "High-precision iron loss analysis using JMAG", JMAG Users conference 2014, 2014-
996Satoshi Shikata: "Development of the new motor for SPORT HYBRID i-DCD system for the Fit3 Hybrid", JMAG Users conference 2014, 2014-
995Hirohito Matsui: "Measurement of magnetic flux density on permanent magnet surfaces for IPM motor", JMAG Users conference 2014, 2014-
994Naohiro Hashidume: "Analysis of brush motors by JMAG", JMAG Users conference 2014, 2014-
993Masashi Inaba: "Fast numerical simulation of 3D electromagnetic analysis using HPC", JMAG Users conference 2014, 2014-
992Masayuki Hirayama: "Large scale 3D electromagnetic field analysis for electric machine design", JMAG Users conference 2014, 2014-
991Yoshihiko Sunayama: "GPU computing research initiatives of Japan Automobile Manufacturers Association, Inc.", JMAG Users conference 2014, 2014-
990Norio Tomiya: "Multi-objective optimization with wide-range shape parametric design space for IPM motor", JMAG Users conference 2014, 2014-
989Mitsutoshi Natsumeda: "Demagnetization analysis of IPM motor with Dy diffused magnet using JMAG-Designer Ver.13.1", JMAG Users conference 2014, 2014-
988Sheng-Yang Lin / Min-Fu Hsieh: "Design of switched reluctance motors considering manufacture impact", JMAG Users conference 2014, 2014-
987Manabu Kawaji: "Introduction to magnetic field design support system using JMAG", JMAG Users conference 2014, 2014-
986Markus Ozbek: "JMAG-RT as a tool in the development of EV/HEV powertrain components", JMAG Users conference 2014, 2014-
985Takayuki Ochiai: "A case of benchmarking of brushless motor using JMAG-Express", JMAG Users conference 2014, 2014-
984Yasuhiro Kondo: "Study of SPM,IPM,IPM vernior Motor using JMAG-Experss", JMAG Users conference 2014, 2014-
983Shinji Ito: "Analysis of responsiveness of air pressure solenoid valves using JMAG-Designer", JMAG Users conference 2014, 2014-
982Shoji Ishikawa: "Magnetic field analysis of Solenoid actuator using JMAG-Designer", JMAG Users conference 2014, 2014-
981Yusaku Suzuki: "Attraction force analysis of a solenoid valve and system control simulation", JMAG Users conference 2014, 2014-
980Makoto Matsushita: "Large-scale numerical analysis of induction motors", JMAG Users conference 2014, 2014-
979Yasuaki Sakamoto: "Development of a rail brake for railway vehicles derived from linear motor technology", JMAG Users conference 2014, 2014-
978Koji Tani: "JMAG analysis for litz wire", JMAG Users conference 2014, 2014-
977Steve Hartridge, Shigetoshi Maeda /Takashi Yamada: "Development plan of co-simulation framework of Star-CCM+ and JMAG", JMAG Users conference 2014, 2014-
976Kanji Shinkawa: "Temperature analysis of the outer rotor type AC generator using JMAG-Designer and STAR-CCM+", JMAG Users conference 2014, 2014-
975Zeng Jinling: "Thermal simulation of an oil-cooled permanent magnet synchronous motor", JMAG Users conference 2014, 2014-
974Akira Kawanishi: "Electromagnetic and heat transfer analysis of HFW steel pipe", JMAG Users conference 2014, 2014-
973Ayaka Nakata: "Computer simulation of high-frequency induction heating using a coupling of JMAG, FLUENT and ANSYS.", JMAG Users conference 2014, 2014-
972Masaya Fukuda: "Applied cases to production technology development using magnetic field - thermal coupling analysis", JMAG Users conference 2014, 2014-
971Takayuki Mizumoto: "Practical application of stress analysis of stator coil-end portion of turbine generator", JMAG Users conference 2014, 2014-
970Naoyuki Kurita: "Vibration analysis of transformer core with magnetostriction by using JMAG", JMAG Users conference 2014, 2014-
969Kiyoshi Wakimoto: "Electromagnetic force as a noise source generated by leakage flux in transformer tank", JMAG Users conference 2014, 2014-
968Ryan Spindler: "Magnetic feedback sensor positioning and determination of harmonic distortion", JMAG Users conference 2014, 2014-
967Masahiro Yamamoto: "JMAG case examples for developing electric components for motorcycle engines", JMAG Users conference 2014, 2014-
966Jean-Claude Mipo: "Influence of the manufacturing process on the behaviour of a claw-pole generator", JMAG Users conference 2014, 2014-
965Ryoji Mizutani: "Application-Oriented Motor Design by using the electromagnetic field analysis in TOYOTA", JMAG Users conference 2014, 2014-
964Takashi Yamada: "Development planning of JMAG", JMAG Users conference 2014, 2014-
963Seiji Nishida: "Introduction of the optimization case study of magnetic circuit analysis integrated with JMAG.", modeFRONTIER International Users Meeting 2014 Trieste (Italy), 2014-
962Seiji Nishida: "Multi-Objective Robust Design Optimization Software "modeFRONTIER"
Introduction of direct integration with "JMAG-Designer" simulation software for electromechanical design and associated customer cases", IDAJ News Vol.70 (Dec. 2013), 2013
-
961Andre Jennert: "Linking Saber and JMAG for an integrated System Simulation Approach for Motor Drive Applications", JMAG Users Conference 2013 in Germany, 2013-
960Antoine Tan-Kim: "Simulation of acoustic noise induced by electromagnetic forces in claw-pole alternators", JMAG Users Conference 2013 in Germany, 2013-
959Koen Vansant: "Optimizing the Acoustic Performance of a Switched Reluctance Motor using a combined multi-physics & FEA simulation approach", JMAG Users Conference 2013 in Germany, 2013-
958Dr.-Ing. Bogdan Funieru : "Simulation of a reduced size demonstrator of a direct drive PM wind generator used for loss measurement", JMAG Users Conference 2013 in Germany, 2013-
957Sebastien Cense: "Virtual Motor bench for high bandwidth ECU testing using JMAG-RT modeling approach on a FPGA chip", JMAG Users Conference 2013 in Germany, 2013-
956Bjoern Bobe: "Enhanced Simulation Quality for Electric Drives in Hardware-in-the-Loop Applications", JMAG Users Conference 2013 in Germany, 2013-
955Mohamed Hadjali: "Development of electric motors in automotive applications using JMAG Software", JMAG Users Conference 2013 in Germany, 2013-
954David Bauer: "Investigation of Proximity Losses in a Permanent Magnet Machine for electric vehicles", JMAG Users Conference 2013 in Germany, 2013-
953Takashi Yamada: "JMAG: Recent development and road map", JMAG Users Conference 2013 in Germany, 2013-
952Ryoko Imamuta, Mullar Kurt, Courtray Alan, Koji Tani, Takashi Yamada: "Vehicle Driving Simulation with High Fidelity Model", 2014
951Kazuki Semba, Koji Tani, Takashi Yamada: "Performance Evaluation of Finite Element Electromagnetic Analyses on Highly Parallel Computing Environment", 2013
950V.B. Honsinge: "Sizinig Equations for Electrical Machinery", IEEE Transactions on Energy Conversion, Vol. EC-2, No.1, March 1987
949Hajime Hida, Yoshio Tomigashi, Kenji Ueyama, Yukinori Inoue, Shigeo Morimoto: "New Torque Estimation Method Considering Spatial Harmonics and Torque Ripple Reduction in Permanent Magnet Synchronous Motors", 2010
948Takashi Yamada: "JMAG Development Plan 2013", JMAG Users Conference2013, 2013-
947Tatsuya Hosotani: "Development of the Highly Functional Integrated Magnetic Transformer for Power Electronics", JMAG Users Conference2013, 2013-
946Hidenori Uematsu: "Easy Simulation Method of the Inductor Devices.", JMAG Users Conference2013, 2013-
945Kouhei Ueda: "Comparison of Actual Measurements of a Reactor Natural Frequency and JMAG Simulation (Refined Modeling of Elements)", JMAG Users Conference2013, 2013-
944Masahiro Aoyama: "Study on Self-Excitation Wound-Field Motor with Field Poles Excited by Space Harmonics", JMAG Users Conference2013, 2013-
943Kwanghee Nam: "Comparative Study of Field-Excitation Flux-Switching Motor Against PMSM for ISG Application", JMAG Users Conference2013, 2013-
942Toshiyuki Yoshizawa: "Magnetic Field Analysis of a Claw Pole Rotating Machine", JMAG Users Conference2013, 2013-
941Takeshi Ikemi: "Development of High power & High efficiency Motor for EV using magnetic field analysis.", JMAG Users Conference2013, 2013-
940David Bauer: "Analysis of Magnet Segmentation for an Electrical Machine used in Hybrid-Cars and Comparison with Calorimetric Measurement", JMAG Users Conference2013, 2013-
939Motomichi Ohto: "The Effect of Stress in Iron Loss Analysis Evaluation and Verification through the Steel Sheet Processing Method", JMAG Users Conference2013, 2013-
938Ayman M. EL-Refaie: "Role of Electrical Machines in Electrification", JMAG Users Conference2013, 2013-
937Kinji Kanagawa: "Enhancing Precision in Superimposed Direct Current Characteristics Computations using a Powder Soft Magnetic Core", JMAG Users Conference2013, 2013-
936Masaki Wasekura: "A Transient Core Loss Calculation Algorithm for Soft Magnetic Composite Material", JMAG Users Conference2013, 2013-
935Yoshihiko Ozaki: "Application and Development Environment of Virtual Motor Torque Ripple Reduction Control", JMAG Users Conference2013, 2013-
934Kazumichi Kaneko: "The Comparison of the real motor and motor HILS using spatial harmonics model", JMAG Users Conference2013, 2013-
933Koji Fukusumi: "High-precision HILS Solution for EV/HEV Control Development (JMAG-RT Support, Spatial Harmonic Model)", JMAG Users Conference2013, 2013-
932Minoru Miyakoshi, Hirotaka Toda,Hisayuki Kabashima: "A Model-Based Development Process of Automobile Using JMAG-RT and PSIM", JMAG Users Conference2013, 2013-
931Tomohiro Morita: "An Example of Motor Control ECU Software Verification from HILS using JMAG-RT", JMAG Users Conference2013, 2013-
930Li Jianfu: "A Tubular Hydro-Generator Through Bolts Failure Analysis", JMAG Users Conference2013, 2013-
929Kohei Kuroda: "Stress analysis of stator coil-end portion of turbine generator", JMAG Users Conference2013, 2013-
928Yusaku Suzuki: "Coupling JMAG with a Structural Analysis and CFD Software", JMAG Users Conference2013, 2013-
927Kurt Muller/Takashi Yamada: "System Design and Component Design (Saber-JMAG's Coupling to Revolutionize the Design Process):What Benefits does Model-Based Development have for Motor Designers?", JMAG Users Conference2013, 2013-
926Masayuki Kawai: "Useful Tips for JMAG-Designer", JMAG Users Conference2013, 2013-
925Miho Shimada: "Case Studies Using JMAG in Electric Motor Development", JMAG Users Conference2013, 2013-
924Takashi Watanabe: "JMAG-Designer Case Studies and Issues for Magnetic Separators", JMAG Users Conference2013, 2013-
923Tsutomu Tanimoto: "An Initiative to Reduce Vibration in an Electric Vehicle Motor", JMAG Users Conference2013, 2013-
922Toshinobu Tanimura: "Thermal Fluid Analysis of a PM Motor Multi-phase Flow", JMAG Users Conference2013, 2013-
921Kazuhiro Maeda: "Abaqus - JMAG Cosimulation of Induction Heating and Induction Forming Processes", JMAG Users Conference2013, 2013-
920Takashi Horino: "Computer simulation of induction heating contains thermal deformation in large ring metal parts.", JMAG Users Conference2013, 2013-
919Akiko Inami: "Crankshaft optimization of induction heat treatment using computer aided engineering(The second report)", JMAG Users Conference2013, 2013-
918Yohei Awata: "High-Frequency Induction Heating Simulation using a Coupling of JMAG and COSMAP", JMAG Users Conference2013, 2013-
917Dong-Ying JU: "Actuality and Scope on Simulation of Heat Treatment", JMAG Users Conference2013, 2013-
916Hiroaki Toda: "Newly introduced non-oriented electrical steel sheets to JMAG material database and the influence of magnetic properties of non-oriented electrical steels on switched reluctance motor's characteristics", JMAG Users Conference2013, 2013-
915Ken Takeda: "Magnet temperature analysis and prototype verification in permanent magnet synchronous motor", JMAG Users Conference2013, 2013-
914Takao Imagawa: "Numerical Validation of Magnetic Measurement method of Motor Core using JMAG Designer.", JMAG Users Conference2013, 2013-
913Kohichi Tanimoto: "The study of calculation accuracy improvement for magnetic loss of motor", JMAG Users Conference2013, 2013-
912Kazuki Semba: "JMAG's Searching Quest for Large Scale, Faster Electromagnetic Analysis - HPC Solver Introduction -", JMAG Users Conference2013, 2013-
911De Langhe Koen: "The Coupling of JMAG with Virtual.Lab Acoustics in view of predicting Transformer Noise due to Magnetostriction", JMAG Users Conference2013, 2013-
910Kenichi Tanaka: "Magnetic Field Analysis of Large Transformers in Direct Current Bias Magnetism", JMAG Users Conference2013, 2013-
909Kiyoshi Wakimoto: "Coil Vibration as a Noise Source Generated by Transformer Load Current", JMAG Users Conference2013, 2013-
908Chikara Kaido: "Handling Cores and Core Materials in Numerical Analyses for Motor Design and Analysis", JMAG Users Conference2013, 2013-
907Takashi Yamada: "JMAG Development Plans 2013", JMAG Users Conference2013, 2013-
906Pascal Bayrasy: "JMAG-CFD coupling by using MpCCI interface", JMAG Users Conference 2012 in Germany, 2012-
905Mha Prins: "2D Magnetic, structural and 3D Thermal modeling of Interior PM Synchronous Machine using JMAG", JMAG Users Conference 2012 in Germany, 2012-
904Marco Carriglio: "Multi-objective optimization of electric motors using modeFRONTIER coupled with JMAG", JMAG Users Conference 2012 in Germany, 2012-
903Bogdan Funieru: "Magnetic and thermal 3D imulation of a conical bearingless PM synchronous machine with JMAG", JMAG Users Conference 2012 in Germany, 2012-
902Holzinger: "Modelling schemes for Transformers and Chokes", JMAG Users Conference 2012 in Germany, 2012-
901Cristofaro Pompermaier: "Finite Elements performance evaluation of a Transverse Flux Machine using Somaloy 500 1P, 700 3P and 5P", JMAG Users Conference 2012 in Germany, 2012-
900Costin Ruja: "Using JMAG and ANSYS for coupled thermal solution of a high current bus bar exit in GSU transformers", JMAG Users Conference 2012 in Germany, 2012-
899Takashi Yamada: "JMAG: Recent development and road map", JMAG Users Conference 2012 in Germany, 2012-
898Brad Heers: "Multi-Physics Applications and Opportunities Enabled Through JMAG and Abaqus Co-simulation", JMAG Users Conference 2012 in USA, 2012-
897Sinisa Jurkovic: "Electric Machine Design and Selection for General Motors e-Assist Light Electrification Technology", JMAG Users Conference 2012 in USA, 2012-
896Takashi Yamada: "JMAG Roadmap and Introduction to JMAG V12", JMAG Users Conference 2012 in USA, 2012-
895Sebastien Cense: "Highlights of the latest developments of OPAL-RT solutions", JMAG Users Conference 2012 in USA, 2012-
894Charles R. Frontczak: "Evaluation of Different Electrical Steels in IPM Hybrid Rotating Machines", JMAG Users Conference 2012 in USA, 2012-
893Ramana Kappagantu: "Multiscale Noise and Vibration models for a Switched Reluctance-based drivetrain for EV and HEV", JMAG Users Conference 2012 in USA, 2012-
892Hossein Dadkhah : "Effects of manufacturing process on IPM motor losses", JMAG Users Conference 2012 in USA, 2012-
891Andy Knight: "Designing Novel Brushless Doubly Fed Machines Using JMAG", JMAG Users Conference 2012 in USA, 2012-
890Jonathan Bird: "Flux Focusing Magnetic Gear Design Using JMAG", JMAG Users Conference 2012 in USA, 2012-
889Nick Keel: "High Fidelity Hardware-in-the-Loop Simulation with JMAG-RT and NI VeriStand", JMAG Users Conference 2012 in USA, 2012-
888John Suriano: "Estimating the effects of partial flux linkages on the resistance of PMAC motor windings", JMAG Users Conference 2012 in USA, 2012-
887Kayoko Seto: "Inductor loss-simulation using JMAG-Designer and comparison with measurement results", JMAG Users Conference 2012 in USA, 2012-
886Tsuyoshi Nomura : "Resistivity analysis of stacked planar Litz structure using Finite Element Method ", JMAG Users Conference 2012 in USA, 2012-
885Hamid A. Toliyat: "Magnetic Gears", JMAG Users Conference 2012 in USA, 2012-
884Brad Heers: "Multi-physics simulation between JMAG and Abaqus, and its applicability to three-field simulation of cell phone speaker acoustic response", JMAG Users Conference2012, 2012-
883Kurt Mueller: "Ideal to Electrical Implementation: SaberRD & JMAG-RT Case Study in a Motor Drive System", JMAG Users Conference2012, 2012-
882Takashi Miyano: "High fidelity HILS and RCP for motor control development", JMAG Users Conference2012, 2012-
881Yusuke Makino: "Design of Switched Reluctance Motor by JMAG for Automotive traction application", JMAG Users Conference2012, 2012-
880Shinsuke Kayano: "Analysis of Eddy-current Loss in Permanent Magnets Using JMAG-SuperExpress", JMAG Users Conference2012, 2012-
879Kenji Endo: "Characteristics Improvement of Skewed Permanent-magnet Motors", JMAG Users Conference2012, 2012-
878Yoshiaki Shinozaki: "Residual Magnetic Field Analysis Using JMAG", JMAG Users Conference2012, 2012-
877Toshihide Yoshida: "Development of Advanced Keyless System Using Magnetic Field CAE", JMAG Users Conference2012, 2012-
876Hirotsugu Fusayasu: "Approach of Electromagnetic Field Analysis for Digital AV Equipment", JMAG Users Conference2012, 2012-
875Nobuyuki Suzuki: "Simulation of the IPM Motor in a HILS Environment", JMAG Users Conference2012, 2012-
874Alvin Lee: "Vibration Optimization of Concentrated Stator and IPM Rotor", JMAG Users Conference2012, 2012-
873Masashi Inoue: "Development of Reduced Rare Earth Magnets by Partial Diffusion Method", JMAG Users Conference2012, 2012-
872Charles R. Frontczak: "Evaluation of Different Electrical Steels and Iron Loss evaluation of inter-locks vs welds vs bonded lamination cores in IPM Hybrid Motor using JMAG.", JMAG Users Conference2012, 2012-
871DAISUKE MITSUOKA: "Electromagnetic Field Analysis of the High-Speed Electric Motor Using the JMAG-GPU Solver", JMAG Users Conference2012, 2012-
870Masahiro Aoyama: "Development of an Automation System for Preliminary Design of HEV and EV Motors", JMAG Users Conference2012, 2012-
869Ryuichi Takakusagi: "Case study of JMAG application at Mitsuba Corporation", JMAG Users Conference2012, 2012-
868Takaomi Kojima: "Efficient 3-dimensional optimization technology for high-precise magnetic rotation angle sensor", JMAG Users Conference2012, 2012-
867Hiroyuki Sano: "JMAG for machinery design in electric power generation systems", JMAG Users Conference2012, 2012-
866Tetsuo Ogawa: "New Features of JMAG-Designer Ver.12", JMAG Users Conference2012, 2012-
865Norihisa Iwasaki: "Miniaturization Design Method and Performance Evaluation of Prototype Permanent-Magnet Synchronous Motor Optimally Designed by Thermo-Magnetic Field Coupling Analysis", JMAG Users Conference2012, 2012-
864SCHoNDELING, Matthias: "Creating Simulation Models based on Measuring Results of Brushed DC-Motors using JMAG-Designer", JMAG Users Conference2012, 2012-
863De Langhe Koen: "Integrated Acoustic Simulation of a Switched Reluctance Motor Drivetrain as part of a Multi-physics approach to Electric Vehicle Optimization", JMAG Users Conference2012, 2012-
862Takashi Ogawa: "Development of the IPM motor using JMAG-SuperExpress", JMAG Users Conference2012, 2012-
861Kengo Takao: "Practical use of JMAG-Designer in motor development", JMAG Users Conference2012, 2012-
860Shigeyuki Hattori: "Efforts to Make Magnetic Field Analysis-Centered CAE Prevalent at Miki Pulley Co., Ltd.", JMAG Users Conference2012, 2012-
859Jun Yoshida: "The Design of Superconducting Magnet using JMAG", JMAG Users Conference2012, 2012-
858Yuichi Tsuboi: "Large Rotating Machine design using FEM analysis", JMAG Users Conference2012, 2012-
857Suzuki takayuki: "Magnetic Field Analysis of Parts of an Oil-Immersed Transformer Full-Scale Analysis Model", JMAG Users Conference2012, 2012-
856Futoshi Yamane: "Taking On Torque Ripple Analysis and Torque Ripple Reduction in SR Motors", JMAG Users Conference2012, 2012-
855Michitaka Hori: "Magnetization Analysis for Magnets in Small Motors", JMAG Users Conference2012, 2012-
854Akihito Toyota: "Development of Cylindrical Linear Motor for Lift-Motion", JMAG Users Conference2012, 2012-
853Katsumi Yamazaki: "Loss analysis and geometry optimization in rotating machines", JMAG Users Conference2012, 2012-
852Takashi Yamada: "JMAG Development Plans 2012", JMAG Users Conference2012, 2012-
851Seiji Nishita: "The introduction of JMAG-Designer Optimization problem, using modeFRONTIER Direct Interface.", JMAG Users Conference2011, 2011-
850Takashi Miyano: "Model Based Development and HILS for motor control development", JMAG Users Conference2011, 2011-
849Simon Abourida: "The State-of-the-Art in Hardware-in-the-Loop Simulation of Motor Drives", JMAG Users Conference2011, 2011-
848Takeshi Fujiwara: "Development of Bicycle Generator Hub Dynamo Using JMAG", JMAG Users Conference2011, 2011-
847Yoshihide Toyoshima: "Development and design of a loudspeaker using JMAG-Designer", JMAG Users Conference2011, 2011-
846Motohito Hirose: "JMAG-Designer Script Course (Practice Version)", JMAG Users Conference2011, 2011-
845Yajima Hisashi: "Making JMAG analysis handy by CATIA models", JMAG Users Conference2011, 2011-
844Kenkichi Anagawa: "Magnetic Shield Design Optimization in HDD Writer", JMAG Users Conference2011, 2011-
843Kazuki Semba: "Approach of a transformer analysis using JMAG", JMAG Users Conference2011, 2011-
842Masato Kabetani: "Core Loss Analysis of the Transformers for Vehicle Power Supplies", JMAG Users Conference2011, 2011-
841Kouhei Ueda: "DC Superposition Characteristic Measurement of Reactors and Comparison with the measured values", JMAG Users Conference2011, 2011-
840Yosuke Iijima: "The magnetic simulation using JMAG and Simpleware", JMAG Users Conference2011, 2011-
839Masatsugu Takemoto: "Development of a Ferrite Permanent Magnet Axial Gap Motor with Segmented Rotor Structure", JMAG Users Conference2011, 2011-
838Nobukazu Hoshi: "Voltage Boost Type Drive Circuit without Additional Reactor for Switched Reluctance Motor", JMAG Users Conference2011, 2011-
837Kan Akatsu: "Variable Characteristics Motors (Matrix motor and CMMF motor)", JMAG Users Conference2011, 2011-
836Seiji Shimizu: "Eddy-Current Rotor Position Sensor", JMAG Users Conference2011, 2011-
835Hideki Ohguchi: "A Case of Coupled Analysis of JMAG-RT and Circuit Simulator", JMAG Users Conference2011, 2011-
834Takushi Fujioka: "A Vibration Analysis Using Numerical Results of Electromagnetic Analysis of the IPM Motor (D-model of IEEJ),Using package softwares, JMAG & CAEFEM", JMAG Users Conference2011, 2011-
833Mitsutoshi Natsumeda: "Demagnetization Analysis Method using Dy Diffused Magnets and the Most Suitable Dy Diffusion Methods and their Effects for Motor Applications", JMAG Users Conference2011, 2011-
832Tetuo Ogawa: "Introducing JMAG-VTB and JMAG-SuperExpress,which make complex and detailed simulations accessible.", JMAG Users Conference2011, 2011-
831Hiroshi Yuki: "Effect of magnetic property on the accuracy of induction heating analysis", JMAG Users Conference2011, 2011-
830Tomoji Osada: "Development of the self fluxing alloy fusing process with the control system using the simulation", JMAG Users Conference2011, 2011-
829Norihide Fujiyama: "A System of Coordination With Analysis Engineers and the Successes That Follow", JMAG Users Conference2011, 2011-
828Takehiro Miyoshi: "Expanding and Utilizing JMAG-Bus for Developing Motor Systems", JMAG Users Conference2011, 2011-
827Brooklin J. Gore: "Optimizing Designs with High Throughput Computing", JMAG Users Conference2011, 2011-
826Ben Black: "Leveraging JMAG-RT and FEA-based Models for High Fidelity Real-Time Test in FPGA", JMAG Users Conference2011, 2011-
825Yoshinori Takeuchi: "JMAG-RT apply to the design quality verification of motor control ECU", JMAG Users Conference2011, 2011-
824Kei Yonemori: "A Case Example of JMAG-RT Application in an Electrical Automotive MBD", JMAG Users Conference2011, 2011-
823Jean-Claude MIPO: "Disribution Losses in Claw Pole Machine -Simulation of eddy Current", JMAG Users Conference2011, 2011-
822Takayuki Miyakawa: "Vibration and Noise Analysis of The Motor for Electric Vehicles", JMAG Users Conference2011, 2011-
821Zeng Jinling: "Researches on the Behavior of Vibration and Noise of an IPM Motor on HEV", JMAG Users Conference2011, 2011-
820Koen De Langhe: "Multiscale Noise and Vibration models for a Switched Reluctance-based drivetrain for EV and HEV", JMAG Users Conference2011, 2011-
819Jim Shoemaker: "Electric Drives for Off-Road Mobile Equipment", JMAG Users Conference2011, 2011-
818Noboru Kikuchi: "Low-frequency Electromagnetic Field Analysis", JMAG Users Conference2011, 2011-
817Takashi Yamada: "Where will JMAG go from here?", JMAG Users Conference2011, 2011-
816Yoshiyuki Sakashita: "JMAG: From Implementation to Efficient Operation", JMAG Users Conference2010, 2010-
815Yuya Yamashita: "Introduction of Features Contributing to an Easy-to-Use JMAG-Designer", JMAG Users Conference2010, 2010-
814Katsuyuki Narita: "Approaches and Future of Iron Loss Analysis in JMAG", JMAG Users Conference2010, 2010-
813Tetsuya Hattori: "Logic and Strategies When Analysis and Measured Results Don't Match", JMAG Users Conference2010, 2010-
812Akinori Shiga: "EMC for Motor Drive Systems", JMAG Users Conference2010, 2010-
811Yuya Yamashita: "New Features of JMAG", JMAG Users Conference2010, 2010-
810Noda Shinichi: "Motor Vibration/Noise Simulation Analysis and Its Features", JMAG Users Conference2010, 2010-
809Kousuke Ichii: "Evaluating the Magnetic Performance of Later Magnetizing Magnets for Electric Vehicles", JMAG Users Conference2010, 2010-
808Dai Higuchi: "Thermal-demagnetization Analysis and Research on Physical Properties of Nd-Fe-B Sintered Magnets", JMAG Users Conference2010, 2010-
807Yuichi Yoshikawa: "Utilizing JMAG Designer for 3D Magnetic Field Analysis Models", JMAG Users Conference2010, 2010-
806Akihiko Furuto: "Expanding and Utilizing JMAG-Designer as Designers", JMAG Users Conference2010, 2010-
805Takayuki Nishio: "Introduction for the utilization techniques of JMAG for transformer design", JMAG Users Conference2010, 2010-
804Yosuke Iijima: "Characteristic Analysis Chip Inductance Under Stress", JMAG Users Conference2010, 2010-
803Hirokazu Hayashida: "Study of local heating on by IPB connection box and around metallic parts of large power transformer by 3-D Magnetic field analysis", JMAG Users Conference2010, 2010-
802Hiroshi Hashimoto: "Modeling and Evaluating Induction heating analysis ", JMAG Users Conference2010, 2010-
801Jun Iwanaga: "Guidelines for Dividing Mesh Used for Radio-frequency Induction Heating Simulations", JMAG Users Conference2010, 2010-
800Norio Takahashi: "Measurement of Magnetic Properties at High Temperature and Application to Magneto-Thermal Coupled Analysis of Induction Heater", JMAG Users Conference2010, 2010-
799Hirofumi Kasahara: "Test and Analysis of Superconducting Electromagnetic Tornado Stirring System", JMAG Users Conference2010, 2010-
798Noboru Niguchi: "Study on Electromagnetic Vibration of Magnetic Gear", JMAG Users Conference2010, 2010-
797Masayuki Sugasawa: "Basic Investigation on Magnetic Pole Changing Type Linear Stepping Actuator using Inverse Magnetostrictive Effect. (With JMAG Simulation)", JMAG Users Conference2010, 2010-
796Yuji Okada: "Electromagnetic Field Analysis for Smart Key Antenna", JMAG Users Conference2010, 2010-
795Yasuhide Yagyu: "Improving Motor Loss Calcualtion Accuracy by Linked Control Simulations and Case Studies", JMAG Users Conference2010, 2010-
794Akinobu Iwai: "Development of an Electric Drive Motor for the Honda FCX Clarity", JMAG Users Conference2010, 2010-
793Toshie Furubayashi: "The Future of JMAG-RT for Furthering Model Based Design", JMAG Users Conference2010, 2010-
792Masaya Harakawa: "Developing Motor Drive Systems Using JMAG-RT", JMAG Users Conference2010, 2010-
791Nobuyuki Suzuki: "Coupled Analysis of a IPM(Interior Permanent Magnet) Motor", JMAG Users Conference2010, 2010-
790Shusaku Hayakawa: "Implementation and Case Study of High Performance/Low Cost Motor-HILS using JMAG-RT", JMAG Users Conference2010, 2010-
789Seiji Nishita: "The introduce of modeFRONTIER JMAG-Designer Direct Interface.", JMAG Users Conference2010, 2010-
788Simon ABOURIDA: "Latest Advancements in Motor Hardware-In-the-Loop Simulation (HILS) based on JMAG-RT", JMAG Users Conference2010, 2010-
787David Dibben: "Multi-Physics Analysis with JMAG-Designer: Current Capabilities and Future Directions", JMAG Users Conference2010, 2010-
786Nick Tzannetakis: "On the role of Process Integration and Design Optimization in ECO Electric Motor Design; a proposition", JMAG Users Conference2010, 2010-
785De Langhe Koen: "Latest advancements in noise and vibration simulation in support of electrical motors and power electronics.", JMAG Users Conference2010, 2010-
784Karl D'SOUZA: "Enabling multiphysics solutions with JMAG and Abaqus.", JMAG Users Conference2010, 2010-
783JEAN-CLAUDE MIPO: "Vibration and Electromagnetic noise analysis in claw pole machine", JMAG Users Conference2010, 2010-
782Takashi Kosaka: "Studies on Less Rare-Earth Permanent Magnet Hybrid Excitation Motor with High Power Density", JMAG Users Conference2010, 2010-
781Yuichi Shibukawa: "Novel Design of Flux-Intensifying Interior Permanent Magnet Synchronous Machine", JMAG Users Conference2010, 2010-
780Kazuto Sakai: "Variable-Magnetic-Flux Motors for Opening up a World of the New Motor-Drive Technology", JMAG Users Conference2010, 2010-
779Zi-Qiang Zhu: "Novel Permanent Magnet Brushless Machines and Applications", JMAG Users Conference2010, 2010-
778Takashi Yamada: "Development planning of JMAG", JMAG Users Conference2010, 2010-
777Katsuyuki Narita: "Utilizing Motor Models for Control Design", JMAG Users Conference2009, 2009-
776Kazuki Semba: "Reducing the Time Required for Analyses Using JMAG's Distributed Processing and Parallel Solver", JMAG Users Conference2009, 2009-
775Yusaku Suzuki: "Designing Transformers and Estimating Problems and Countermeasures", JMAG Users Conference2009, 2009-
774Hiroshi Hashimoto: "Technical Challenges Related to Induction Heating Analyses- Modeling Material Properties -", JMAG Users Conference2009, 2009-
773Takayuki Nishio: "Practical Electromagnetics for Electrical Device Analysis", JMAG Users Conference2009, 2009-
772Tetsuya Hattori: "Parametric Analyses Using JMAG-Designer", JMAG Users Conference2009, 2009-
771Katsuyuki Narita, Tetsuya Hattori: "Report of Harumi-1 Project", JMAG Users Conference2009, 2009-
770Hidenobu Itagaki: "Engineer's Education using Electromagnetics CAE at Mitsubishi Electric", JMAG Users Conference2009, 2009-
769Taketsune Nakamura: "Analysis of nonlinear characteristics in high temperature superconductor rotating machine", JMAG Users Conference2009, 2009-
768Masahiro Kitagawa: "Parametrizing the Coil Construction and Coupling Coefficients of Inverter Transformers in JMAG", JMAG Users Conference2009, 2009-
767Tsutomu Hamada: "Considerration of the Joule Loss in Windings for Power Reactor", JMAG Users Conference2009, 2009-
766Yushi Kamiya: "Development and Performance Evaluation of a Contactless Inductive Power Supply (IPS) System for Electric-driven Vehicles", JMAG Users Conference2009, 2009-
765Katsumi Kesamaru: "Simulation of Small Wind Power Generating System Using PMSG", JMAG Users Conference2009, 2009-
764Masaru Kobori: "Utilizing a Magnetic Field Analysis for a Hybrid Stepping Motor", JMAG Users Conference2009, 2009-
763Masahiro Aoyama: "Development of motor for small car HEV and introduction of co-simulation of motor and inverter using JMAG-RT", JMAG Users Conference2009, 2009-
762Takashi Horino: "Examination of an induction heating simulation using the B-H curve", JMAG Users Conference2009, 2009-
760Shunsuke Funaji: "Examples Utilizing JMAG", JMAG Users Conference2009, 2009-
759Shinji doki: "Expectations from Control Technology to Magnet Field Analyses", JMAG Users Conference2009, 2009-
758Hajime Hida, Yoshio Tomigashi, Kenji Ueyama: "Examination of a torque estimation method by using JMAG-RT.", JMAG Users Conference2009, 2009-
757Dai Higuchi: "The Newest Developments of Rare-earth Magnets", JMAG Users Conference2009, 2009-
756Yoshio Yoshikuwa: "A study of generating factor of the electromagnetic excitation forces and development of low-noise motors", JMAG Users Conference2009, 2009-
755Yoshihiko Ozaki: "Virtual Motor Capable of Connecting to an Inverter that Supports Nonlinear Response (JMAG-RT Compatible)", JMAG Users Conference2009, 2009-
754Farzin Shakib: "AcuSolve: 3D Thermal Flow Analysis of JMAG Results", JMAG Users Conference2009, 2009-
753Katsumi Yamazaki: "Loss Analysis and Shape Optimization of Interior Permanent Magnet Motors", JMAG Users Conference2009, 2009-
752Akihide Takehara: "Development and Challenges of Motors for Toyota's Hybrid Vehicles", JMAG Users Conference2009, 2009-
751Toshiaki Idemitsu: "Product development of IPM motor and the example for the applications", JMAG Users Conference2009, 2009-
750Thomas M. Jahns: "Interior PM Synchronous Machines: Historical Perspectives, Current Status, and Future Directions", JMAG Users Conference2009, 2009-
749Takashi Yamada: "Development planning of JMAG", JMAG Users Conference2009, 2009-
748Takashi Yamada: "JMAG Deveopment Plan", JMAG Users Conference2008, 2008-
747Kan Akatsu,Katsuyuki Narita,Yoshuki Sakashita,Takashi Yamada: "Comparison between IPM and SPM based on Experiment and Analysis Result(Report of Harumi Project1)", JMAG Users Conference2008, 2008-
746Edmund Soji Otabe: "Practice of JMAG by e-learning", JMAG Users Conference2008, 2008-
745Kenji Nakamura: "Using JMAG in a Laboratory", JMAG Users Conference2008, 2008-
744Hiroyasu Tomita: "Efficiency improvement of non-contact power supply systems", JMAG Users Conference2008, 2008-
743Hideo Matsumoto: "Analysis of Switching Transformers Using Common and Specialized JMAG Features", JMAG Users Conference2008, 2008-
742Masahiro Shima,Shinji Ikeda: "Estimation of Inductance Variation in Small, Low Profile Transformers", JMAG Users Conference2008, 2008-
741Shigeki Gunji: "Scaling ICCG Performance in Multicore: The Current and Future Perspective", JMAG Users Conference2008, 2008-
740Takeshi Iwashita: "Technology for accelerating electromagnetic field analyses", JMAG Users Conference2008, 2008-
739Kazuki Semba: "Speeding Up JMAG Solver for Large Scale Analysis", JMAG Users Conference2008, 2008-
738Yusaku Suzuki: "Use of JMAG as CAE: Case Studies of Users", JMAG Users Conference2008, 2008-
737Masayuki Sugasawa: "Evaluation of eddy current characteristic for applied high frequency voltage to the giant magnetrostrictive material", JMAG Users Conference2008, 2008-
736Manabu Fukumoto,Katsuhiko Kizawa,Kazuo Okamura,AtsuhikoOhta: "Finite Element Analysis of a Steering Rack Shaft Subjected to the High-Frequency Induction Hardening Process", JMAG Users Conference2008, 2008-
735Tetsuya Kagawa: "Analysis of an induction-heating fusing unit using JMAG", JMAG Users Conference2008, 2008-
734Hisashi Yajima,Nobuhiro Fujiwara,Yoshikazu Tatsumi,Hiroyuki Wakiwaka: "Electromagnetic Field Analysis of a Giant Magnetostrictive Actuator Using JMAG ", JMAG Users Conference2008, 2008-
733Yasushi Fujishima: "Streamlining Electromagnetic Field Analysis and Supporting the Decision-Making Using modeFRONTIER", JMAG Users Conference2008, 2008-
732Ryoma Matsuo: "Customized Development of Automotive Motor System using JMAG-Studio", JMAG Users Conference2008, 2008-
731Kazumasa Ide: "Numerical Magnetic Field Analysis in Electric Performance Calculation in Large Rotating Machines.", JMAG Users Conference2008, 2008-
730Takashi Yamada: "The history of JMAG", JMAG Users Conference2008, 2008-
729Takashi Yamada: "Recent developments and future plan for JMAG", JMAG Users Conference2007, 2007-
728Takashi Horino: "Computer Analysis of Dual Frequency Induction Heating using JMAG-Studio", JMAG Users Conference2007, 2007-
727Stephan Frei: "How Simulation Can Support the Automotive EMC-Development Process", JMAG Users Conference2007, 2007-
726Christian Dufour: "Modern Hardware-In-the Loop Simulation Technology for Fuel Cell Hybrid Electric Vehicles", JMAG Users Conference2007, 2007-
725Kaoru Miyazaki: "A study on analysis of PM stepping motor", JMAG Users Conference2007, 2007-
724VESE Ioama-Comelia: "Electromagnetic and Thermal Characterization of a Permanent-Magnet Tubular Machine using JMAG software", JMAG Users Conference2007, 2007-
723Frank Hsieh: "Evaluation of the acoustic noise of DC permanent magnet motor", JMAG Users Conference2007, 2007-
722Masanori Arata: "Large Torque and High Effectiency Permanent Magnet Reluctance Motor for A Hybrid Truck", JMAG Users Conference2007, 2007-
721Yusaku Suzuki: "Introduction to the electromagnetic field analysis software for transformer design", JMAG Users Conference2007, 2007-
720Toshikazu Ninomiya: "An analysis of the inductance for gapped magnet-core reactor", JMAG Users Conference2007, 2007-
719Masao Syuto: "Object lesson og electric equipment design that users JMAG in Mie University", JMAG Users Conference2007, 2007-
718Kazuo Kato: "Temperature analysis og non-invasive hyperthermia system using JMAG-Studio", JMAG Users Conference2007, 2007-
717Mitsutoshi Natsume: "Resent trend of the permanent magnet and the magnetic field analysis technology", JMAG Users Conference2007, 2007-
716Hironori Ninomiya: "Appulication and possibilities of High Silicon Steels-JFE Super Core", JMAG Users Conference2007, 2007-
715Koji Fujiwara: "The Effective Use of Magnetic Property Database", JMAG Users Conference2007, 2007-
714Akira Chiba: "EXPERIENCES IN 3D FEM ANALYSIS", JMAG Users Conference2007, 2007-
713Shigekazu Sakabe: "Demands for electromagnetic field analysis and problems specific to transformers", JMAG Users Conference2007, 2007-
712Masanori Arata, Motoyasu Mochizuki, Takashi Araki, Takashi Hanai, Masakatsu Matsubara: "Decrease in Sub-harmonics Frequency Noise Induced by Rotor Eccentric Motion and its Induction Currents between Parallel Stator Circuits", IEEJ-D Vol.133 No.10 p.995-1002, 2013
711Reddy, P.B. ; Jahns, T.M. ; Bohn, T.P.: "Transposition Effects on Bundle Proximity Losses in High-Speed PM Machines", Energy Conversion Congress and Exposition, 2009. ECCE 2009. IEEE Page(s): 1919 - 1926, 2009
710R.Ando, M.Koizumi, T.Ishikawa: "Development of a simulation method for dynamic characteristics of fuel injector", IEEE Transactions on Magnetics, vol.37, no.5, pp.3715-3718, 2001
709Miyagi, Aoiki, Nakano, Takahashi: "Effect of Compressive Stress in Thickness Direction on Iron Losses of Nonoriented Electrical Steel Sheet", IEEE Trans. on Magn., vol.46, no.6, pp.2040-2043, 2010
708Yamazaki Katsumi, Suzuki Akihiro, Ohto Motomichi, Takakura Teruyuki: "Composition of Equivalent Circuit for Induction Motors Considering Stray Load Loss and Harmonic Torques Using Electromagnetic Field Analysis", 2010
707Taizo Senda*, Katsuyuki Narita, Noriyo Mimura, Takayuki Nishio, Koji Tani, Takashi Yamada: "Investigation of stray load losses in power transformer", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-13-081, RM-13-095, 2013
706Katsuyuki Narita*, Tatsuya Asanuma, Kazuki Semba, Takashi Yamada ,Kan Akatsu: "The evaluation of the joule loss and the hysteresis loss in the laminated core of SR motor", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-13-082,RM-13-096, 2013
705Kazuki SEMBA*, Koji TANI, Takashi YAMADA, Takeshi IWASHITA, Yasuhito TAKAHASHI, and Hiroshi NAKASHIMA: "Application of Multithreaded ICCG Solver Based on Algebraic Block Multi-color Ordering to Finite Element Electromagnetic Field Analyses", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-13-090,RM-13-104, 2013
704Masahiko Miwa*, Kensuke Matsunaga, Kazuki Semba, Koji Tani, Takashi Yamada: "Investigation of the Acceleration of Electromagnetic Field Analysis using Multiple GPUs", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan SA-13-091,RM-13-105, 2013
703SAKASHITA Yoshiyuki, HATTORI Tetsuya, YAMADA Takashi, OTA Ryohei, ZEZE Eri, AKATSU Kan: "Comparison of Electromagnetic/Vibration Co-Simulation and experimental result for Permanent magnet motor.", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, Vol,SA-12, No.23-48, pp.111-116, 2012
702TAKAHATA Ryoichi, WAKUI Shinichi, MIYATA Kenji, NOMA Keiji, SENOO Masaharu: "Study on Reduction in Vibrations of Concentrated Winding Permanent Magnet Synchronous Motor by Skew Effects of Rotor", IEEJ Transactions on Industry Applications, Vol.132, No.2, pp.278-287, 2012
701Alireza Khaligh and Mehdi Vakilian: "Power Transformers Internal Insulation Design Improvement Using Electric Field Analysis Through Finite-Element Methods", IEEE Trans Magn, Vol.44, No.2, pp.273-278, 2008
700Tangudu, J.K. ; Jahns, T.M. ; El-Refaie, A.M. ; Zhu, Z.Q.: "Segregation of Torque Components in Fractional-Slot Concentrated Winding Interior PM Machines Using Frozen Permeability", Energy Conversion Congress and Exposition, 2009. ECCE 2009. IEEE Page(s): 3814 - 3821
699Tsili, M.A.; Amoiralis, E.I.; Kladas, A.G.; Souflaris, A.T. : "Hybrid Numerical-Analytical Technique for Power Transformer Thermal Modeling", IEEE Trans Magn, Vol. 45, No.3, pp.1408-1411, 2009
698Kazuaki Yoshikura, Masayuki Morimoto: "FEM Analysis of Non-contact Feeding System for Electric Vehicle", PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1- 8, pp.4466-4469, 2008
697D.H.Im: "Analysis of radial force as a source of vibration in an induction motor with skewed slots", IEEE Transaction on Magnetics., vol.33, no.2
696Martin van der Geest, Henk Polinder, Jan A. Ferreira, Dennis Zeilstra: "Stator winding proximity loss reduction techniques in high speed electrical machines", Electric Machines and Drives Conference (IEMDC), 2013 IEEE International
695HABIB Ashfaque Hassain, ONDECK Matthew G., MILLER Kelsey J., SWAMINATHAN Raja, MCHENRY Michael E.: "Novel Solder-Magnetic Particle Composites and Their Reflow Using AC Magnetic Fields", IEEE Trans. Magn., vol.46, no.6, pp.2187-2190, 2010-
694WANG Xufei, WANG Xufei, TANG Jintian, SHI Liqun: "Induction Heating of Magnetic Fluids for Hyperthermia Treatment", IEEE Trans. Magn., vol.46, no.4, pp.1043-1051, 2010-
693DOLEZEL I., KARBAN P., KROPIK P., PANEK D.: "Accurate Control of Position by Induction Heating-Produced Thermoelasticity", IEEE Trans. Magn., vol.46, no.8, pp..2888-2891, 2010-
692WASSELYNCK Guillaume, TRICHET Didier, FOULADGAR Javad: "Determination of the Electrical Conductivity Tensor of a CFRP Composite Using a 3-D Percolation Model", IEEE Trans. Magn., vol.49, no.5, pp.1825-1828, 2013-
691KAGIMOTO Hiroyuki, MIYAGI Daisuke, TAKAHASHI Norio, UCHIDA Naoki, KAWANAKA Keiji: "Effect of Temperature Dependence of Magnetic Properties on Heating Characteristics of Induction Heater", IEEE Trans. Magn., vol.46, no.8, pp.3018-3021, 2010-
690DOLEZEL I., DOLEZELI., DUBCOVA L., KARBAN P., CERVENY J.: "Inductively Heated Incompressible Flow of Electrically Conductive Liquid in Pipe", IEEE Trans. Magn., vol.46, no.8, pp.2899-2902, 2010-
689YAMADA Takahiro, FUJISAKI Keisuke, FUJISAKI Keisuke: "Basic Characteristic of Electromagnetic Force in Induction Heating Application of Linear Induction Motor", IEEE Trans. Magn., vol.44, no.11, pp.4070-4073, 2008-
688UENO Kazuyuki, ANDO Tsutomu: "Theoretical Study of Induction Pump for Molten Metal Using Rotating Twisted Magnetic Field", IEEE Trans. Magn., vol.48, no.3, pp.1200-1211, 2012-
687SERGEANT Peter, SERGEANT Peter, HECTORS Dietrich, HECTORS Dietrich, DUPRE Luc: "Magnetic Shielding of Levitation Melting Devices", IEEE Trans. Magn., vol.46, no. 2, pp.686-689, 2010-
686FABBRI Massimo, FORZAN Michele, LUPI Sergio, MORANDI Antonio, RIBANI Pier Luigi: "Experimental and Numerical Analysis of DC Induction Heating of Aluminum Billets", IEEE Trans. Magn., vol.45, no.1, pp.192-200, 2009-
685ACERO Jesus, CARRETERO Claudio, ALONSO Rafael, BURDIO Jose M.: "Quantitative Evaluation of Induction Efficiency in Domestic Induction Heating Applications", IEEE Trans. Magn., vol.49, no.4, pp.1382-1389, 2013-
684RAMDANE Brahim, TRICHET Didier, BELKADI Mohamed, FOULADGAR Javad: "3-D Numerical Modeling of the Thermo-Inductive Technique Using Shell Elements", IEEE Trans. Magn., vol.46, no.8, pp.3037-3040, 2010-
683KARBAN Pavel, KOTLAN Vaclav, DOLEZEL Ivo: "Numerical Model of Induction Shrink Fits in Monolithic Formulation", IEEE Trans. Magn., vol.48, no.2, pp.483-486, 2012-
682WANG Junhua, WANG Youhua, HO S.L., YANG Xiaoguang, FU W.N.: "Design and FEM Analysis of a New Distributed Vernier Traveling Wave Induction Heater for Heating Moving Thin Strips", IEEE Trans. Magn., vol.47, no.10, pp.2612-2615, 2011-
681ALOTTO P., SPAGNOLO A., PAYA B.: "Particle Swarm Optimization of a Multi-Coil Transverse Flux Induction Heating System", IEEE Trans. Magn., vol.47, no.5, pp.1270-1273, 2011-
680MENG L.C., CHENG K.W.E., WANG W.M.: "Thermal Impacts of Electromagnetic Proximity Effects in Induction Cooking System With Distributed Planar Multicoils", IEEE Trans. Magn., vol.47, no.10, pp.3212-3215, 2011-
679MENG L. C., CHENG K. W. E., HO S. L.: "Multicoils Design for Induction Cookers With Applying Switched Exciting Method", IEEE Trans. Magn., vol.48, no.11, pp.4503-4506, 2012-
678ZHU Zhanxin, XIE Dexin, WANG Gang, ZHANG Yanli, YAN Xiuke: "Computation of 3-D Magnetic Leakage Field and Stray Losses in Large Power Transformer", IEEE Trans. Magn., vol. 48, no.2, pp.739-742, 2012-
677HO S L, LI Y, WONG H C, WANG S H, TANG R Y: "Numerical Simulation of Transient Force and Eddy Current Loss in a 720-MVA Power Transformer", IEEE Trans. Magn., vol. 40, no.2, pp.687-690, 2004-
676HILGERT Tom, VANDEVELDE Lieven, MELKEBEEK Jan: "Comparison of Magnetostriction Models for Use in Calculations of Vibrations in Magnetic Cores", IEEE Trans. Magn., vol. 44, no.6, pp.874-877, 2008-
675KITAGAWA Wataru, ISHIHARA Yoshiyuki, TODAKA Toshiyuki, NAKASAKA Akira: "Analysis of Structural Deformation and Vibration of a Transformer Core by using Magnetic Property of Magnetostriction", The Institute of Electrical Engineers of Japan Research Materials, Vol.SA-06, No.76-94, pp.53-58, 2006-
674LIU Gang, LI Lin, JI Feng, LI Wenping, SUN Youliang: "Analysis of Transient Electric Field and Charge Density of Converter Transformer Under Polarity Reversal Voltage", IEEE Trans. Magn., vol. 48, no.2, pp.275-278, 2012-
673SHAN Tao, ZHANG Peihong: "Calculation of 3D electric field at the end insulation of transformer", 2011 The 6th International Forum on Strategic Technology 460-463 (2011)-
672TAKAKURA Yoshifumi, TAKAHASHI Yasuhito, FUJIWARA Koji, ISHIHARA Yoshiyuki, MASUDA Tsuyoshi: "Iron Loss Analysis of the Wound-Core Transformer Considering Core Joint Configuration", The Institute of Electrical Engineers of Japan Research Materials, Vol.SA-12, No.99-119, pp.83-88, 2012-
671S.Waik, pp.Drzymala, H.Welfle: "3D Computer Field Model of Power Transformer-Magnetic Field and Power Losses Computation", ICEM (2010)-
670KANAYAMA Hiroshi, ASAKAWA Shuuji, SUGIMOTO Shin-ichiro: "A Large Scale Eddy Current-Thermal Analysis for a Transformer Tank", IEEJ Transactions on Power and Energy B, Vol.128, No.2, pp.437-442, 2008-
669Toshiyuki Yanari: "History of Power Transformers in Japan and Description of Historical Materials", Survey Reports on the Systematization of Technologies No. 4 (March, 2004)-
668Noda Shinichi, Ishibashi Fuminori, Ide Katuki: "Vibration Response Analysis of Induction Motor Stator Core (Vibration Response of Distributed Excitation and Multipoint Excitation)", Transaction of The Japan Society of Mechanical Engineers Series C, Vol.59, No.562, pp.1650-1656, 1993-
667Shinichi NODA, Isao SUZUKI, Kazunobu ITIMI, Fuminori ISHIBASHI, Sadaaki MORI and Youich IKEDA: "Natural Frequencies of Stator Core with Frame in Induction Motor", Transaction of The Japan Society of Mechanical Engineers Series C, Vol.61, No.591, pp.4195-4201, 1995-
666Kazunobu ITIMI, Shinichi NODA, Isao SUZUKI and Fuminori ISHIBASHI: "Analysis for Natural Frequencies of Stator Core in Induction Motor", Transaction of The Japan Society of Mechanical Engineers Series C, vol64 No.624, 1998-
665Shinichi NODA, Kazunobu ITIMI, Fuminori ISHIBASHI and Katuki IDE: "Contact Pressure and Natural Frequencies on Dual Ring (Experimental Study for Natural Frequencies Stator Core in Induction Motor", Transaction of The Japan Society of Mechanical Engineers Series C, Vol.65, No.629, pp.23-29, 1999-
664Kazunobu ITIMI, Shinichi NODA, Isao SUZUKI, Fuminori ISHIBASHI and Hisashi YAMAWAKI: "Young's Modulus of Windings on Finite Element Method for Natural Frequency Analysis of Stator Core in Induction Motor", Transaction of The Japan Society of Mechanical Engineers Series C, Vol.68, No.669, pp.1343-1348, 2002-
663Ryo KAWASAKI, Kazuyuki YAMAMOTO, Koji MASUMOTO, and Masaharu NISHIMURA: "Noise and Vibration Analysis of Compressor for Air-Conditioning Machine Equipped with a Concentrated Winding Motor with a Press-Fitted Segment Core", Transaction of The Japan Society of Mechanical Engineers Series C, Vol.77, No.777, pp.1729-1736, 2011-
662Koki Shiohata, Kanako Nemoto, Yasumasa Nagawa, Shigeru Sakamoto, Takashi Kobayashi, Motoya Ito, Haruo Koharagi: "A Method for analyzing Electromagnetic-Force-Induced Vibration and Noise Analysis", IEEJ-D, Vol.118, No.11, p1301-1307, 1998-
661SAKASHITA Yoshiyuki, HATTORI Tetsuya, YAMADA Takashi, IDE Hiroto, OTA Ryohei, ZEZE Eri, AKATSU Kan: "Comparison of Electromagnetic/Vibration Co-Simulation and experimental result for Permanent magnet motor. (The 2nd report)", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, vol.SA-12, no.99-119, pp.69-75, 2012-
660Investigating R and D Committee on analysis technology for electromagnetic vibration and acoustic noise of induction machines: "Analysis Technology for Electromagnetic Vibration and Acoustic Noise of Induction Machines", IEEJ Technical Report No.1048, 2006-
659Kenzo Tonoki, Shinichi Noda, Makoto Matsushita: "Finite Element Method for Natural Frequency Analysis of Stator Core in Induction Motor (K-Model)", The National Convention of IEEJ 2005 (5-126)-
658IWATA Yoshio, SATO Hidenori, MORIOKA Yawara: "Natural Frequency of Rotor with Rotor Core", Transaction of The Japan Society of Mechanical Engineers Series C, Vol.57, no.544, pp.3748-3753, 1991-
657NEVES C G C, CARLSON R, SADOWSKI N, BASTOS J P A, SOEIRO N S: "Experimental and numerical analysis of induction motor vibrations", IEEE Trans. Magn., vol. 35, no.3,Pt.1, pp.1314-1317, 1999-
656IM D H, CHANG J H, PARK S C, KWON B I, HONG J P: "Analysis of radial force as a source of vibration in an induction motor with skewed slots", IEEE Trans. Magn., vol. 33, no.2, pp.1650-1653, 1997-
655Ishibashi Fuminori, Noda Shinich, Mori Sadaaki: "Electromagnetic Vibration of Small Squirrel Cage Three-Phase Induction Motor", IEEJ-D, vol.112, no.3, pp.307-313, 1992-
654A. Lipo: "Modeling and Simulation of Induction Motors with Saturable Leakage Reactance", IEEE Trans. on Ind. Applicat. , vol.20, no.1, pp.180-189, 1984-
653YAMAZAKI Katsumi, WATANABE Yuta: "Interbar Current Analysis of Induction Motors Using 3-D Finite-Element Method Considering Lamination of Rotor Core", IEEE Trans. Magn., vol.42, no.4, pp.1287-1290, 2006-
652KNIGHT A M: "Efficient Parallel Solution of Time-Stepped Multislice Eddy-Current Induction Motor Models", IEEE Trans. Magn., vol.40, no.2, pp.1282-1285, 2004-
651HO S L, FU W N: "A comprehensive approach to the solution of direct-coupled multislice model of skewed rotor induction motors using time-stepping eddy-current finite element method", IEEE Trans. Magn., vol.33, no.3, pp.2265-2273, 1997-
650YAMAZAKI K: "Modification of 2D nonlinear time-stepping analysis by limited 3D analysis for induction machines", IEEE Trans. Magn., vol.33, no.2, pp.1694-1697, 1997-
649ARKKIO A: "Finite Element Analysis of Cage Induction Motors Fed By Static Frequency Converters", IEEE Trans. Magn., vol. 26, no.2, pp.551-554, 1990-
648KATAGIRI Hirokatsu, KAWASE Yoshihiro, YAMAGUCHI Tadashi, TSUJI Takeshi, SHIBAYAMA Yoshiyasu: "Improvement of Convergence Characteristic for Steady-State Analysis of Motor With Simplified Singularity Decomposition-Explicit Error Correction Method", IEEE Trans. Magn., vol. 47, no.6, pp.1786-1789, 2011-
647Josephat Kalezhi, Simon J.Greaves, Yasushi Kanai, Manfred E.Schabes, Michael Grobis, Jim J.Miles: "A statistical model of write-errors in bit patterned media", Jornal of Applied Physics 111-
646Toshio Tsukamoto, Yasushi Kanai, Kazuya Koyama, Kazuetsu Yoshida, Yuji Uehara, Koichi Shimizu, Simon Greaves, Hiroaki Muraoka: "Micromagnetic Simulation of Recording Write Heads a Comparison of Various Micromagnetic Software", IEEE Transactions on Magnetics, vol.48, no.2, pp.311-314, 2012-
643Kazuto Sakai, Hisanobu Hashimoto: "Permanent Magnet Motors to Change Poles and Machine Constants", 20th International Conference on Electrical Machines (ICEM),-
639Yu-Han, Min-Fu Hsieh and David G.Dorrell: "Different Arrangements for Dual-Rotor Dual-Output Radial-Flux Motors", IEEE Transactions on industry applications, vol.48, no.2, pp.612-622, 2012-
638Feng Yaojing, Yang Kai: "Electromagnetic Analysis and Design of Two-pole Line-start Permanent Magnet Synchronous Motor", COMPUMAG2011-
637Feng Yaojing, Yang Kai: "A Two-pole High-power Line-start Permanent Magnet Synchronous Motor", Electrical Machines and Systems (ICEMS)-
636M. B. Shadmand and R. S. Balog: "Determination of Leakage Inductance and Self Capacitance of the Windings in a High Frequency Switching Power Supply Inductors Using JMAG", IEEE Applied Power Electronics Conference and Exposition (APEC)-
635M. B. Shadmand and R. S. Balog: "FEA Tool Approach for Determination of Parasitic Capacitance of the Windings in High Frequency Coupled Inductors Filters", IEEE Power and Energy Conference at Illinois-
634K. Uppalapati, J. Bird: "A FLUX FOCUSING FERRITE MAGNETIC GEAR", PEMD Conference-
633Wenying Jiang, T.M. Jahns, T.A. Lipo, William Taylor, Yusaku Suzuki, : "Machine Design Optimization based on Finite Element Analysis in a High-Throughput Computing Environment", IEEE ECCE (Energy Conversion Congress and Exposition)-
632James D. McFarland, T.M. Jahns: "Investigation of the Rotor Demagnetization Characteristics of Interior PM Synchronous Machines during Fault Conditions", IEEE ECCE (Energy Conversion Congress and Exposition)-
631Jagadeesh K. Tangudu, T.M. Jahns: "Scalability Characteristics of Magnetic Circuit Model for Fractional-Slot Concentrated Winding IPM Machines", IEEE ECCE (Energy Conversion Congress and Exposition)-
620HIJIKATA Hiroki, AKATSU Kan: "Winding Reconfiguration Method of MATRIX Motor under Driving Condition", The papers of Technical Meeting on Vehicle Technology, IEE Japan, vol.VT-12, No.6-19, pp.37-42, 2012-
619Natee Limsuwan, Takachi Kato, Kan Akatsu, and Robert D.Lorenz: "Design and Evaluation of a Variable-Flux Flux-Intensifying Interior Permanent Magnet Machine", IEEE Energy Conversion Congress and Exposition (ECCE), 2012-
618Takashi Kato, Natee Limsuwan, ChenYen Yu, Kan Akatsu, Robert D. Lorenz: "Rare Earth Reduction using a Novel Variable Magnetomotive Force, Flux Intensified IPM Machines", IEEE Energy Conversion Congress and Exposition (ECCE), 2012-
617Noriya Nakao and Kan Akatsu: "Torque Control of a Switched Reluctance Motor by using Torque Estimation and Excitation Angle Control", IEEE Energy Conversion Congress and Exposition (ECCE), 2012-
616Hiroki Hijikata and Kan Akatsu: "Design and Online Winding Reconfigurations Method of MATRIX Motor", IEEE Energy Conversion Congress and Exposition (ECCE), 2012-
615Zeze, E. ; Akatsu, K. : "Research on Vibration Analysis and Noise-Reduction Technique of PM Motor", ICEM (International Conference on Electrical Machines Assosiation), 2012-
614Takahashi, Tomohiro ; Akatsu, K. : "A Drive System of PM Motor Using Energy Harvesting", IPEMC (International Power Electronics and motion Control Conference), 2012-
613Nagai, T. ; Ando, G. ; Akatsu, K. : "Consideration of CSI Drive for SRM Compared with VSI Drive", IPEMC (International Power Electronics and motion Control Conference), 2012-
612Hijikata, H. ; Akatsu, K. : "Design and Online Winding Reconfigurations Method of MATRIX Motor", IEEE Energy Conversion Congress and Exposition (ECCE), 2012-
611Miyamasu, M. ; Akatsu, K.: "A Study of High Torque Surface-Mounted Permanent Magnet Synchronous Motor by Maximum Utilization of the Magnet Flux", International Conference on Electrical Machines and Systems (ICEMS), 2012-
610Yamada, T. ; Akatsu, K. : "Automatic Design Method Considering the Frequently Used Area of a PMSM for an HEV", International Conference on Electrical Machines and Systems (ICEMS), 2012-
609Nakao, N. ; Akatsu, K. : "Simple unipolar excitations for SR motors considering fundamental component of self-inductance distribution", International Conference on Electrical Machines and Systems (ICEMS), 2012-
608Hijikata, H. ; Shigeta, T. ; Akatsu, K. ; Kato, T. : "Experimental Verification on Dual Winding Method for Compound Magnet Motive Forces Motor", IEEE International Conference on Power and Energy (PECon), 2012-
607Miyamasu, M. ; Akatsu, K.: "An Approach to Generate High Reluctance Torque in an Inset-type PMSM by Square Current Excitation", IEEE International Conference on Power and Energy (PECon), 2012-
606Natee Limsuwan , Takashi Kato, Chen-Yen Yu, Jun Tamura, David Reigosa, Natee Limsuwan , Takashi Kato, Chen-Yen Yu, Jun Tamura, David Reigosa, Kan Akatsu and Robert D. Lorenz: "Secondary Resistive Losses with High-Frequency Injection-Based Self-Sensing in IPM Machines", IEEE Transactions on Industry Applications, vol. 49 No.4, pp.1499-1507, 2013-
605YAMAZAKI Katsumi, FUKUOKA Takashi, AKATSU Kan, NAKAO Noriya, RUDERMAN Alex: "Investigation of Locked Rotor Test for Estimation of Magnet PWM Carrier Eddy Current Loss in Synchronous Machines", IEEE Trans. on Magnetics, vol. 48, No.11, pp.3327-3330, 2012-
604NAKAO Noriya, AKATSU Kan: "Torque Ripple Control for Synchronous Motors Using Instantaneous Torque Estimation", IEEE Industry Applications Magazine,2011-
603ARIHARA Hiromu, AKATSU Kan: "Basic Properties of an Axial-Type Switched Reluctance Motor", IEEE Transactions on Industry Applications, vol.49, no.1, pp.59-65, 2013-
602MIYAMASU Masataka, AKATSU Kan: "Efficiency Comparison between Brushless DC Motor and Brushless AC Motor Considering Driving Method and Machine Design", Annu Conf IEEE Ind Electron Soc, Vol. 2, pp.1830-1835, 2011-
598Stephan Dunkl, Annette Muetze: "Multi-Domain Design of a Small Single-Phase Brushless DC Fan Motor Drive", IEMDC 2013-
593X.Liu*, Z.Q. Zhu*, Z.P. Pan**: "Analysis of Electromagnetic Torque in Sinusoidal Excited Switched Reluctance Machines Having DC Bias in Excitation", ICEM2012-
592X. Liu*, Z.Q. Zhu*, M. Hasegawa**, A. Pride**, R. Deohar**: "Investigation of PWMs on vibration and noise in SRM with sinusoidal bipolar excitation", IEEE International Symposium on Industrial Electronics (ISIE)-
591X. Liu*, Z.Q. Zhu*, M. Hasegawa**, A. Pride**, R. Deohar**: "Vibration and noise in novel variable flux reluctance machine with DC-field coil in stator", 7th International Conference Power Electronics and Motion Control (IPEMC)-
590X. Liu, Z.Q. Zhu: "Influence of rotor pole number on electromagnetic performance of novel variable flux reluctance machine with DC-field coil in stator", 7th International Conference Power Electronics and Motion Control (IPEMC)-
589Ryota Sawamura,Shinya Ikenaga, and Atsushi Matsubara: "Development of Dynamic Loading Device for Rotating Spindle of Machine Tools", Key Engineering Materials Vols. 523-524-
588Dr Robert Brand*, Prof Dr Andrea Vezzini**, Dr Luvica Baselgia**: "Winning the power struggle", automotivedesign-
586Z. Huang, S. Nategh, V. Lassila, M. Alakula, J. Yuan: "Direct Oil Cooling of Traction Motors in Hybrid Drives", IEEE International Electric Vehicle Conference-
585A. Krings, S. Nategh, A. Stening, H. Grop, O. Wallmark, J. Soulard: "Measurement and Modeling of Iron Losses in Electrical Machines", WMM12-
584S. Nategh, O. Wallmark, M. Leksell, S. Zhao: "Thermal Analysis of a PMaSRM Using Partial FEA and Lumped Parameter Modeling", IEEE Transactions on Energy Conversion-
583S. Nategh, A. Krings, Z. Huang, O. Wallmark, M. Leksell, M. Lindenmo: "Evaluation of stator and rotor lamination materials for thermal management of a PMaSRM", Proc. 20th International Conference on Electrical Machines (ICEM)-
582Dipl.-Ing.Micro Strauch*, Dipl.-Ing.Stefan Dewnter*, Prof.Dr.-Ing.Dr.h.c.habil.A.Binder*, Prof.K.H.Nam**: "Calculation of the electromagnetic characteristics of an electrically excited synchronous motor for and EV", IEEE Vehicle Power and Propulsion Conference-
581B.Funieru, A.Binder: "Simulation of Electrical Machines End Effects with Reduced Length 3D FEM Models", Electrical Machines (ICEM), 2012 XXth International Conference on-
519S. Zhao, S. Hagbin, O. Wallmark, M. Leksell, S. Lundmark, O. Carlson: "Transient modeling of an integrated charger for a plug-in hybrid electric vehicle", European Conference on Power Electronics and Applications (EPE'11)-
518S. Zhao, O. Wallmark, M. Leksell: "Analysis of a deeply saturated sensorless PMSynRel drive for an automotive application", European Conference on Power Electronics and Applications (EPE'11)-
517S. Nategh, O. Wallmark, M. Leksell: "Thermal Analysis of Permanent-Magnet Synchronous Reluctance Machines", European Conference on Power Electronics and Applications (EPE'11)-
516S. Nategh, V. Lassila, Z. Huang, O. Wallmark, M. Leksell: "Evaluation of alternative stator and rotor lamination materials for thermal management of permanent magnet machines", IEEE International Magnetics Conference (INTERMAG)-
515Munteanu, G. Binder, A. Schneider, T.: "Loss measurement of a 40 kW High Speed Permanent Magnet Synchronous Machine with Active Magnetic Bearings", ECCE 2011-
514B.Funieru, M.Mirazaei, and A.Binder: "Full and Simplified Loss Calculation FEM Models for Segmented Surface Permanent Magnet Machines", Compumag 2011-
512Y.Sato, S.Ishikawa, T.Okubo, M.Abe, K.Tamai: "Development of High Responese Motor and Inverter System for the Nissan LEAF Electric Vehicle", SAE International 2011-
511KAWASAKI Ryo, YAMAMOTO Kazuyuki, MASUMOTO Koji, NISHIMURA Masaharu: "Noise and Vibration Analysis of Compressor for Air-Conditioning Machine Equipped with a Concentrated Winding Motor with a Press-Fitted Segment Core", JSME-C, Vol77, No.777, p1729-1736, 2011-
510Yasushi Kanai, Hideo Hosokai, Kazuya Koyama, Kiyoshi Yamakawa, Kazuetsu Yoshida, Simon J.Greaves, and Hiroaki Muraoka: "Micromagnetic Analysis to Reduce Adjacent Track Erasure Field in Planar Write Heads", INTERMAG 2011, EE-01, Y.Kanai, et, al.-
509Masato Ito, Yoshihiki Kipara: "Direct Rotor-Position Estimation Method for Salient Pole PM Motor by Using High-Frequency Voltage", IEEJ Transactions on Industry Applications, Vol.131, No.6, pp.785-792, 2011-
508HAGIWARA Nobumi: "Study on the Principle of Contactless Electric Power Transfer via Electromagnetic Coupling", IEEJ Transactions on Industry Applications, Vol.131, No.5, pp.708-713, 2011-
507Kazuo Sakai, Kazuaki Yuki, Yutaka Hashiba, Norio Takahashi, Kazuya Yasui, Lilit Kovudhikulrungsri: "Principle and Basic Characteristics of Variable-Magnetic-Force Memory Motors", IEEJ Transaction on Industry Applications, Vol131, No.1, pp.53-pp.60, 2011-
506Alotto, pp. ; Spagnolo, A. ; Paya, B.: "Particle Swarm Optimization of a Multi-Coil Transverse Flux Induction Heating System", IEEE Transactions on Magnetics, Vol.47, No.5, pp.1270-1273, 2011-
455K. Khan, S. Hagbin, M. Leksell, O. Wallmark: "Design and Performance Analysis of a Permanent-Magnet Assisted Synchronous Reluctance Machine for an Integrated Charger Application", Proc. 19th International Conference on Electrical Machines-
454K. Khan, M. Leksell, O. Wallmark : "Design aspects on magnet placement in permanent-magnet assisted synchronous reluctance machines", Proc. 5th IET International Conference on Power Electronics, Machines and Drives-
453O. Maloberti, C. Marchand, Y. Choua, D. Condamin, L. Kobilansky, E. Bomme: "Multi-Physical QuasiStatic Modelling of an Axial Flux Permanent Magnet Machine", XIX International Conference on Electrical Machines-
452KITAMURA Hideki, IWASAKI Norihisa, KITAMURA Masashi, MORI Hideaki, YAMASAKI Masahide, NIHEI Hideki: "Development of optimal Design Method with Thermo-Magnetic Field Coupling Analysis for Miniaturization of Permanent-Magnet Synchronous Motors", IEEJ Transactions on Industry Applications, vol.131, no.11, pp.1301-1308, 2011-
451KANAI Y., GREAVES S., MURAOKA H., TAGAWA I.: "Singled Perpendicular Magnetic Recording and Suitable Write Heads", Magnetics Japan, Vol.5, No.7, pp.320-331, 2010-
450Y.Kanai, K.Yoshida, S.Greaves, M.Takagishi, F.Akagi: "Application of Micromagnetics to Magnetic Recording IV : Recording Field and Magnetization Analysis of Recording Write Heads (2)", Magnetics Japan, Vol.5, No.1, pp.30-38, 2010-
449YOSHIMOTO Kantaro, TAKAHASHI Kouji, OKUSHIMA Keiji, TANI Kazuhiko: "Novel Multiple DC-Inputs Direct Electric-Power Converter", IEEJ Transactions on Industry Applications, vol.130, No.2, pp.251-257, 2010-
448Minoru Kondo: "Torque Expressions and Equivalent Circuits for Salient Pole Synchronous Machines", IEEJ Transactions on Industry Applications, vol.130, No.2, pp.236-242, 2010-
447Katsunori Soejima, Tsuyoshi Higutchi, Takashi Abe, Tadashi Hirayama, Katsuiti Kouno: "Development of Low-Speed Low-Capacity Vertical-Axis Type Wind Power Generator", IEEJ-Trans IA, vol.130, No.2, pp.181-188, 2010-
446Takayuki Koyama, Junnosuke Nakatsugawa, Yuji Enomoto: "Analysis of Torque Ripple Caused by Three-Phase Unbalance in Claw Teeth Motors", IEEJ Transactions on Industry Applications, vol.130, No.2, pp.166-172, 2010-
445Takumi Ohnuma, Suk-Hwa Jung, Shinji Doki, Shigeru Okuma: "Maximum Torque Control with Inductance Setting of Extended EMF Observer", IEEJ Transactions on Industry Applications, vol.130, No.2, pp.158-165, 2010-
444Yoshiaki Kano, Takashi Kosaka, Nobuyuki Matsui, Toshihito Nakanishi: "Sensorless-Oriented Design of Concentrated-Winding IPM Motor for General Industrial Applications", IEEJ Transactions on Industry Applications, vol.130, No.2, pp.119-128, 2010-
443Takehiro Imura, Hiroyuki Okabe, Toshiyuki Uchida, Yoichi Hori: "Study of Magnetic and Electric Coupling for Contactless Power Transfer Using Equivalent Circuits -Wireless Power Transfer via Electromagnetic Coupling at Resonance-", IEEJ Transactions on Industry Applications, vol.130, no.1, pp.84-92, 2010-
442Takehiro Imura, Hiroyuki Okabe, Toshiyuki Uchida, Yoichi Hori: "Wireless Power Transfer during Displacement Using Electromagnetic Coupling in Resonance -Magnetic-versus Electric-Type Antennas-", IEEJ Transactions on Industry Applications, vol.130, no.1, pp.76-83, 2010-
441Yuta Niwa, Yuji Akiyama, Tomokazu Naruta: "Propositions for the Analysis of Commutation Phenomena and Modeling of Universal Motors Using the State Function Method", IEEJ Transactions on Industry Applications, vol.130, no.1, pp.68-75, 2010-
440Qingliang Zhang, Takahiro Ueno, Noboru Morita: "Basic Studies for Accurate Commutation Analysis which Enables Commutation Spark Energy Estimation", IEEJ Transactions on Industry Applications, vol.130, no.1, pp.60-67, 2010-
439OSTROWSKI Joerg Marc, BEBENDORF Mario, HIPTMAIR Ralf, KRAEMER Florian: "H-Matrix Operator Preconditioning for Full Maxwell at Low Frequencies", IEEE Transactions on Magnetics, Vol.46, No.8, pp.3193-3196, 2010-
438J.Pippuri, A.Belahcen, E.Dlala, and A.Arkkio: "Inclusion of Eddy Currebts in Laminations in Two-Dimensional Finite Element Analysis", IEEE Transactions on Magnetics, Vol.46, No.8, pp.2915-2918, 2010-
437ABED Nagy Y., MOHAMMED Osama A.: "Physics Based High Frequency Transformer Modeling by Finite Elements", IEEE Transactions on Magnetics, Vol.46, No.8, pp.3249-3252, 2010-
436D. J, McKinnon,C. Grantham: "Single-Pass Induction Motor Parameter Identification Method Taking Into Account Saturation and Rotor Parameter Variations", ICEMS2010 Induction, Synchronous Machines-
435Norihiro Tsuchiya, Masayuki Morimoto: "Iron Loss Characteristics of Induction Motor Made of Soft Magnetic Composite (SMC)", ICEMS2010 Induction, Synchronous Machines-
434Hiroyuki Ohsaki, Yutaka Terao, Rashidul M. Quddes, Masaki Sekino: "Electromagnetic Characteristics of 10 MW Class Superconducting Wind Turbine Generators", ICEMS2010 Induction, Synchronous Machines-
433Marco Festa, Heinz-Dieter Eberhardt, Wilfried Hofmann: "Advances in Power Density and Efficiency -Circumferentially vs. Conventionally Cooled Electric Motors", ICEMS2010 Induction, Synchronous Machines-
398Takehiro Imura, Toshiyuki Uchida, Yoichi Hori: "A Unified Explanation of Electromagnetic Induction and Electromagnetic Resonant Coupling for Contactless Power Transfer", The papers of Technical Meeting on Vehicle Technology, IEE Japan, vol.VT-09-007,no.1-9, pp.35-40, 2009-
397-: "Electromagnetic-thermal coupled analysis of billet heater for heating before forging", Mitsui Engineering & Shipbuilding Co., Ltd. Technical Report, no.196, pp.31-37, 2009-
396Takashi Horino, Yue Yang, Fumiaki Ikuta, Kazuhiro Kawasaki: "Computer Simulation of Steel Case Depth Hardened by Dual Frequency Induction Heat-treatment", Proc. 17th IFHTSE Congress, pp.737-740, 2009-
395Manabu Fukumoto, Katsuhiko Kizawa, Kazuo Okamura and Atsuhiko Ohta: "Finite Element Analysis of a Steering Rack Shaft Subjected to the High-Frequency Induction Hardening Process", Proc. 17th IFHTSE Congress, pp.689-692, 2009-
394Y.Kanai, K.Yoshida, S.Greaves, M.Takagishi, F.Akagi: "Applications of Micromagnetics to Magnetic Recording III : Recording Field and Magnetization Analysis of Recording Write Heads (1)", Magnetics Japan. Vol.4, No.10, pp.484-492, 2009-
393K.Hirasawa, Y.Kanai, K.Yoshida, S.Greaves, H.Muraoka: "Micromagnetic Analysis of Shielded Single-Pole-Type Heads", Journal of the Magnetics Society of Japan, Vol.33, No.5, pp.403-413, 2008-
392Tatsuya KAISE, Kazunori HIRASAWA, Yasushi KANAI, Yutaka TANGE, Tadao OHTANI: "3-D FD-TD analysis of an optical near-field generated by a metallic thin-film for thermally assisted magnetic recording", IEICE Technical Report, vol.109, no.80, pp.51-57, 2009-
391Makoto Matsushita, Fuminori Ishibashi, Takao Suzuki, Shinichi Noda: "Bridge Inductance of Induction Motor with Closed Rotor Slots", IEEJ Transactions on Industry Applications, vol.129, No.12, pp.1163-1168, 2009-
390Junichi Tsuchiya: "Development and Evaluation of Surface Motor Using Halbach-Type Magnet", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1133-1134, 2009-
389Junichi Asama, Akira Chiba, Tadashi Fukao: "Design and Performance Evaluation of a Coreless Thrust magnetic Bearing with a Cylindrical Permanent Magnet Mover", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1085-1091, 2009-
388Isao Hirotsuka, Kazuo Tsuboi: "Effect of Slot Combination and Skewed Slot on Electromagnetic Vibration of Capacitor Motor under Load", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1075-1084, 2009-
387Katsumi Yamazaki, Noriaki Fukushima: "Carrier Loss of Induction Motors Driven by Inverters -Comparison between Results Separated by Experiment and Field Analysis-", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1068-1074, 2009-
386Masatsugu Nakano, Chiyo Fujino, Yoshihiro Tani, Akihiro Daikoku, Yukari Toide, Shinichi Yamaguchi, Hideaki Arita, Takashi Yoshioka: "High-Precision Calculation of Iron Loss by Considering Stress Distribution of Magnetic Core", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1060-1067, 2009-
385NAKANISHI Yuji, SUGIMOTO Kensho, MORITA Noboru: "Investigation for the Flashover Phenomenon in DC Machines - Sastainable Voltage of DC Arc - ", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1054-1059, 2009-
384Takahiro Mizuguchi, Kenji Nakamura, Takayuki Koyama, Osamu Ichinokura: "A Description of a Design Method of a Claw Teeth Motor on the Basis of Three-Dimensional Reluctance Network Analysis", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1048-1053, 2009-
383Hajime Ichita, Rion Takahashi, Toshiaki Murata, Junji Tamura, Mamoru Kimura, Masaya Ichinose, Moto-o Futami, Kazumasa Ide: "A Study on the Economic Conditions of Wind Turbine Generation System with Doubly Fed Synchronous Generator", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1038-1047, 2009-
382Makoto Takanezawa, Masami Mori, Takahiro Ueno, Noboru Morita, Toru Otaka, Masanori Arata: "Comparison of Carbon Brush Sliding Characteristics with Copper Ring and Steel Ring in Large Alternate Rotating Machine", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1030-1037, 2009-
381YAMAZAKI Katsumi, KANOU Yuji, FUKUSHIMA Yu, OHKI Shunji, NEZU Akira, IKEMI Takeshi, MIZOKAMI Ryoichi: "Development of Interior Permanent Magnet Motors with Concentrated Windings for Reducing Magnet Eddy Current Loss", IEEJ Transactions on Industry Applications, vol.129, No.1,1 pp.1022-1029, 2009-
380Wataru Kitagawa, Yosuke Hattori, Koji Fujiwara, Yoshiyuki Ishihara, Toshiyuki Todaka: "Database Design for Magnetic Properties Oriented to Electromagnetic Field Analysis", IEEJ Transactions on Industry Applications, vol.129, No.11, pp.1016-1021, 2009-
379Yuji Enomoto, Hirooki Tokoi, Kinya Kobayashi, Hisato Amano, Chio Ishihara, Keisuke Abe: "Development of Claw Teeth Motor Using High-Density Soft Magnetic Composite", IEEJ Transactions on Industry Applications, vol.129, no.10, pp.1004-1010, 2009-
378HIRATA Katsuhiro, MATSUI Keisuke, OTA Tomohiro: "Dynamic Analysis of Linear Resonant Actuator under PWM Control Employing the 3-D Finite Element Method", IEEJ Transactions on Industry Applications, vol.129, No.7, pp.756-760, 2009-
377FUKUDA Tomohiro, SASAKI Yutaka, MORIMOTO Masayuki: "Load Characteristics of Induction Motor Manufactured by Soft Magnetic Composite", IEEJ Transactions on Industry Applications, vol.129, No.7, pp.725-730, 2009-
376Pham Ngoc Ha, Hideaki Fujita, Kazuhiro Ozaki, Naoki Uchida: "Dynamic Performance of a Current-Phase Control Method for Zone-Control Induction Heating Systems", IEEJ Transactions on Industry Applications, vol.129, No.7, pp.691-697, 2009-
375Hideki Ohguchi, Masao Shuto,Takashi Sakiyama, Akio Toba: "A Study of Cogging Torque of 8-Pole 12-Slot PM Motor Based on Analysis and Experiment", IEEJ Transactions on Industry Applications, Vol.129, no.7, pp.667-673, 2009-
374OKUDA Tatsuya, URAKABE Takahiro, OHI Takeshi: "Method for Equalizing Switching Loss of MOSFETs Caused by the Wiring Structure Connected in Parallel", IEEJ Transactions on Industry Applications, Vol.129 no.6, pp.622-627, 2009-
373KOYAMA Takayuki, KAKUGAWA Shigeru, KAWAMATA Shouichi, KITAMURA Masashi: "Method Based on 3D Electromagnetic Field Analysis and Electrical Circuit Analysis for Obtaining Optimal Design of Single-Phase PM Synchronous Motors", IEEJ Transactions on Industry Applications, Vol.129,no.5, pp.476-481, 2009-
372REMY Ghislain, KREBS Guillaume, TOUNZI Abdelmounaim, BARRE Pierre-Jean: "Detent Force Calculations of a PMLSM Using the Finite Element Method", IEEJ Transactions on Industry Applications, Vol.129, no.5, pp.462-469, 2009-
371Shun Taniguchi, Toshihiro Homma, Shinji Wakao, Keiichiro Kondo, Takashi Yoneyama: "Control Method for Harmonic Voltage Injection to Achieve Noise Reduction in Position-Sensorless Control of Permanent-Magnet Synchronous Motors at Low Speeds", IEEJ Transactions on Industry Applications, Vol.129, no.4, pp.382-388, 2009-
370Fuminori Ishibashi, Makoto Matsushita, Shinichi Noda: "Harmonic Electromagnetic Forces in Induction Motors", IEEJ Transactions on Industry Applications, Vol.129, no.4, pp.375-381, 2009-
369Yasuaki Sakamoto, Takayuki Kashiwagi, Minoru Tanaka,Hitoshi Hasegawa, Takashi Sasakawa, Nobuo Fujii: "Rail Brake System Using a Linear Induction Motor for Dynamic Braking", IEEJ Transactions on Industry Applications, Vol.129, No.3, pp.342-349, 2009-
368Akitomo Komatsuzaki, Tatsunori Bamba, Ichiro Miki: "Estimation of Rotor Position in a 3-Phase SRM at Standstill and Low Speeds ", IEEJ Transactions on Industry Applications, Vol.129, No.3, pp.311-318, 2009-
367Mamoru Kimura, Kazumasa Ide, Hiroyuki Mikami: "A Study of Current Waveform Analysis for PWM Inverter-Fed Permanent Magnet Synchronous Machine Based on Harmonic Reactance", IEEJ Transactions on Industry Applications, Vol.129, No.3, pp.297-302, 2009-
366Motoshi Matsushita, Hiroyuki Kameyama Yasuhiro Ikeboh, Shingo Morimoto: "Sensorless Sinusoidal Wave Drive for Control of Power Factor of PM Motor by Detection of Inverter Bus Current", IEEJ Transactions on Industry Applications, Vol.129, No.3, pp.281-288, 2009-
365Bu Yinggang, Ryota Aotsuka,Tsutomu Mizuno: "Examination of Vibration Control of Liniear Oscillatory Actuator", IEEJ Transactions on Industry Applications, Vol.129, no.2, pp.184-190, 2009-
364NOZAKI Yuichiro, KOSEKI Takafumi: "Identification of Plant Model of Linear Induction Motors for Traction System : Intended for Use in High-Performance Controller", IEEJ Transactions on Industry Applications, Vol.129, No.2, pp.158-165, 2009-
363Tsutomu Kominami, Yasutaka Fujimoto: "Studies on Thrust Characteristic of High-Thrust Spiral Motor", IEEJ Transactions on Industry Applications, Vol.129, no.2, pp.130-135, 2009-
362Shoji Satou, Keisuke Fujisaki: "Evaluation of Influence of Time-Varying Electromagnetic Component in M-EMS on Flow at Free Surface", IEEJ Transactions on Industry Applications, Vol.124, no.2, pp.124-129, 2009-
361Anton Lebedev, Dipali Thakkar, Dick Laro, Elena Lomonova, Andre Vandenput: "Contactless Linear Electromechanical Actuator: Experimental Verification of the Improved Design", IEEJ Transactions on Industry Applications, Vol.129, no.2, pp.119-123, 2009-
360Fuminori Ishibashi, Makoto Matsushita, Shinichi Noda: "Harmonic Electromagnetic Force in Induction Motors", IEEJ Transactions on Industry Applications, Vol.129, No.4, pp..375-381, 2009-
359FABBRI Massimo, FORZAN Michele, LUPI Sergio, MORANDI Antonio, RIBANI Pier Luigi: "Experimental and Numerical Analysis of DC Induction Heating of Aluminum Billets", IEEE Transactions on Magnetics, Vol.45, No.1, pp.192-200, 2009-
269Atsushi INOUE,Hironori FUJIOKA,Shigeki MORII and Mochimitsu KOMORI: "Study on Stability of Steel Strip Under the Eloctromagnetic Shape Controller", JSME-C Vol74 No.748, pp.2878-2885, 2008-
268Kazunori HIRASAWA, Kazuya KOYAMA, Yoshihiro JINBO, Yasushi KANAI, Kazuetsu YOSHIDA, Simon GREAVES, Hiroaki MuRAOKA: "FEM static and micromagnetic dynamic recording field analysis of a single-pole-type head", IEICE Technical Report, vol.108, no.346, pp.61-66, 2008-
267FUJISAKI Keisuke, FUJIKURA Masahiro, MINO Jirou, SATOU Shouji: "3-Dimensional Magnetic Field Analysis by Homogenization Method for Thin Steel Plate", IEEJ Transactions on Industry Applications, Vol.128, no.3, pp..303-309, 2008-
266YAMADA Takahiro, FUJISAKI Keisuke, FUJISAKI Keisuke: "Basic Characteristic of Electromagnetic Force in Induction Heating Application of Linear Induction Motor", IEEE Transactions on Magnetics, Vol.44, No.11, pp.4070-4073, 2008-
265KANAI Yasushi, HIRASAWA Kazunori, TSUKAMOTO Toshio, YOSHIDA Kazuetsu, GREAVES Simon John: "Micromagnetic Recording Field Analysis of a Single-Pole-Type Head for 1-2 Tbit/in2", IEEE Transactions on Magnetics, Vol.44, No.11, pp.3609-3612, 2008-
264MURAOKA Hiroaki, GREAVES Simon J., KANAI Yasushi: "Modeling and Simulation of the Writing Process on Bit-Patterned Perpendicular Media", IEEE Transactions on Magnetics, Vol.44, No.11, pp.3423-3429, 2008-
263Yasushi Kanai, Masahiro Saiki, Kazunori Hirasawa, Toshio Tsukamomo, and Kazuetsu Yoshida: "Landau-Lifshitz-Gilbert Micromagnetic Analysis of Single-Pole-Type Write Head for Perpendicular Magnetic Recording Using Full-FFT Progtam on PC Cluster System", IEEE Transactions on Magnetics, Vol.44, No.6, pp.1602-1605, 2008-
262HAFNER Martin, HENROTTE Francois, GRACIA Mercedes Herranz, HAMEYER Kay: "An Energy-Based Harmonic Constitutive Law for Magnetic Cores With Hysteresis", IEEE Transactions on Magnetics, Vol.44, No.6, pp.922-925, 2008-
261Ralf Hiptmair, Florian Kramer, Jorg Ostrowski: "A Robust Maxwell Formulation for All Frequencies", IEEE Transactions on Magnetics, Vol.44, No.6, pp.682-685, 2008-
260Tetsuya Hattori, Yasushi Suzuki , Takashi Yamada: "Analysis of Permanent Magnet Type Stepping Motor with Claw Poles Using Electromagnetic Field Analysis", ICEMS 2008-
209YOSHIKUWA Yoshio, IMAGI Akihiko, OIKAWA Tomoaki: "Effect of Manufacturing Errors on the Electromagnetic Vibration of Brushless DC Motors", JSME-C, Vol.73, No.729, pp.74-80, 2007-
208KIM Yong‐Jae, DOHMEKI Hideo: "Cogging Force Verification by Deforming the Shape of the Outlet Edge at the Armature of a Stationary Discontinuous Armature PM-LSM", IEEE Transactions on Magnetics, Vol.43, No.6, pp.2540-2542, 2007-
207Seung-Bin Lim, Dae-Sung Jung, Ki-Chan Kim, Dae-Hyun Koo, and Ju Lee: "Characteristic Analysis of Permanent-Magnet-Type Stepping Motor With Claw Poles by Using 3 Dimensional Finite Element Method", IEEE Transactions on Magnetics, Vol.43, No.6, pp.2519, 2007-
206Joao S.D.Garcia, Mauricio V. Ferreira da Lu, Joao Pedro A. Bastos and Nelson Sadowski: "Transverse Flux Machines: What for?", IEEE Multidisciplinsry Engineering Education Magazine, Vol.2, No.1, pp.4-pp.6, 2007-
205Hironobu Yonemori, Miki Kobayashi: "Development of Double-Coil Drive Type IH Cooking Heater Corresponding to All-Metals", IEEJ Transactions on Industry Applications, Vol.127, No.3, pp.234-240, 2007-
204KANO Yoshiaki, KOSAKA Takashi, MATSUI Nobuyuki: "GA-Based Computer-Aided Electromagnetic Design of Two-Phase SRM for Compressor Drives", IEEJ Transactions on Industry Applications, Vol.127, No.2, pp.208-216, 2007-
203DAIKOKU Akihiro, YAMAGUCHI Shinichi: "Cogging Torque Investigation of PM Motors Resulting from Asymmetry Property of Magnetic Poles : Influence of Performance Variation between Permanent Magnets", IEEJ Transactions on Industry Applications, Vol.127, No.2, pp.198-207, 2007-
202Katsumi Yamazaki, Atsushi Abe: "Iron Loss Analysis of IPM Motor Considering Carrier Harmonics", IEEJ Transactions on Industry Applications, Vol.125, No.7, pp.758-766, 2005-
201SATOH Mitsuhiko, KANEKO Seiichi, TOMITA Mutuwo, DOKI Shinji, OKUMA Shigeru: "Stator Shape Improvement to Decrease Iron Loss Caused by Shrink Fit Utilizing Physical Properties of Electrical Steel Sheet", IEEJ Transactions on Industry Applications, Vol.127, No.1, pp.60-68, 2007-
200TAGAMI Kotaro, OGASAWARA Satoshi, FUNATO Hirohito, KANAZAWA Hidetoshi, UESUGI Michika, MOIZUMI Kenichi: "Analysis of Shaft Voltage and Bearing Current in an inverter-Fed Nongrounded Motor", IEEJ Transactions on Industry Applications, Vol.127, No.3, pp.286-292, 2007-
166Y.Yoshikuwa, A.Imagi, H.Kometani, J.Okada: "A Study of the Generation and Reduction of the Electromagnetic Excitation Force for Small Induction Motors", JSAEM, Vol.14, No1, pp.102-107, 2005-
165Tetsuya Hattori, Yoshiyuki Sakashita ,Takashi Yamada: "The analysis considered the off-center of rotor in permanent magnet Synchronous motor", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, Vol.SA-06, No.16-33, pp.73-78, 2006-
164DAIKOKU Akihiro, YAMAGUCHI Shinichi, TOIDE Yukari, FUJIWARA Koji, TAKAHASHI Norio: "Cogging Torque Estimation of Permanent Magnet Motors Resulting from Magnetic Anisotropy of Non-oriented Electrical Steel Sheets", IEEJ Transactions on Industry Applications, Vol.126, No.12, pp.1712-1721, 2006-
163MATSUMOTO Naohisa, SANADA Masayuki, MORIMOTO Shigeo, TAKEDA Yoji: "Torque Performance and Permanent Magnet Arrangement for Interior Permanent Magnet Synchronous Motor", IEEJ Transactions on Industry Applications, Vol.126, No.7, pp.954-960, 2006-
162Takanori Suzuki, Shinya Ito, Naoki Tanaka, Akira Chiba, Tadashi Fukao, Hironori Ninomiya: "Development of High Efficiency Switched Reluctance Motor", IEEJ Transactions on Industry Applications, Vol.126, No.4, pp.511-518, 2006-
161DAIKOKU Akihiro, NAKANO Masatsugu, TANI Yoshihiro, YAMAGUCHI Shinichi, TOIDE Yukari, ARITA Hideaki, YOSHIOKA Takashi, FUJINO Chiyo: "Cogging Torque Calculation of Permanent Magnet Motor Considering Stress Distribution in Magnetic Core", IEEJ Transactions on Industry Applications, Vol.126, No.1, pp.74-83, 2006-
160HIWAKI Hideharu, MURAKAMI Hiroshi, HONDA Yukio, SANADA Masayuki, MORIMOTO Shigeo: "Reducing Iron Loss by Decreasing Stress in Stator Core of Permanent Magnet Synchronous Motor", IEEJ Transactions on Industry Applications, Vol.126, No.7, pp.852-856, 2006-
159AKATSU Kan, ARIMITSU Minoru, WAKUI Shinji: "Design and Control of a Field Intensified Interior Permanent Magnet Synchronous Machine", IEEJ, Vol.126, No.7, pp.827-834, 2006-
158MIYAGI Daisuke, SAITOU Aisya, TAKAHASHI Norio, UCHIDA Naoki, OZAKI Kazuhiro: "Improvement of zone control induction heating equipment for high-speed processing of semiconductor devices", IEEE Transactions on Magnetics, Vol.42, No.2, pp..292-294, 2006-
121Yoshio YOSHIKUWA, Akihiko IMAGI, Akihiro DAIKOKU, Toshinori TANAKA, Masafumi OKAZAKI: "Temperature Rise Reduction of Silent DC Motor Brushes for Electrical Power Steering with Short Circuit Wires in Symmetrical Position", JSME-C, Vol.71, No.711, pp.3196-3201, 2005-
120Hiroki Kawaguchi, ENOKIZONO Masato, TODAKA Takashi: "Thermal and magnetic field analysis of induction heating problems", Journal of Materials Processing Technology, Vol.161, no.1-2, pp.193-198, 2004-
119Tetsuya Hattori, Katsuyuki Narita, Takashi Yamada: "Cogging Torque Analysis for a Surface Permanent Magnet Motor with a Skewed Rotor Considering the Lamination Factor of Electrical Steel Sheets", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, Vol.SA-05, No.20-39, pp.7-12, 2005-
118Shinji Wakao, Koji Fujiwara, Tadashi Tokumasu, Akihisa Kameari: "Useful Formulas of Analytical Integration in Electromagnetic Field Computations (Part 6)", IEEJ-SA, vol.2005, no.1, pp.83-89, 2005-
117Keiji AOTA, Akio YAMAGIWA, Kouki MORIMOTO, Yosihiro KATAOKA: "Technique of the reduction in the noise of concentrated winding motors for Rotary compressors", JIPE, Vol31, pp.75-79, 2005-
116Masegi Takahiro, Hayakawa Soichiro, Tsuchida Nuio: "2D Magnetic Field Analysis Technique for Indction Motor with Free-Rotating Magnets", IEEJ Transactions on Industry Applications, Vol.125, No.10, pp.940-945, 2005-
115KOSAKA Takashi, SHIKAYAMA Toru, MATSUI Nobuyuki: "An Estimation Approach for PWM Carrier Loss on Rotor in Slotless Permanent Magnet Motors", IEEJ Transactions on Industry Applications, Vol.125, No.5, pp.5115-18, 2005-
114BOADI Alexander, TSUCHIDA Yuji, TODAKA Takashi, ENOKIZONO Masato: "Designing of suitable construction of high-frequency induction heating coil by using finite-element method", IEEE Transactions on Magnetics, Vol.41, No.10, pp.4048-4050, 2005-
100SHIOHATA Koki, OGATA Toshiaki, ISHIBASHI Fuminori, NODA Shinichi: "Experimental investigation of vibration and Noise from I.E.E. Induction Motor K Model", IEEJ-RM, Vol.2004, no.98, pp.81-86, 2004-
099Katsumi Shingai, Toshihiko Noguchi: "Spatial Harmonics Based Mechanical Sensorless Control of Concentrated Wound IPM Motor", The Institute of Electrical Engineers of Industry Applications Conference Proceedings, Vol.2004, No.1, pp.343-346, 2004-
098Tetsuya Hattori, Katsuyuki Narita, Akinori Shiga, Masahiko Miwa: "Cogging Torque Analysis for a Surface Permanent Magnet Motor with a Skewed Rotor", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, Vol.SA-04, No.59-73, pp.7-12, 2004-
097AKATSU Kan, WAKUI Shinji, ARIMITSU Minoru: "Automatic Design Method for PM Motor which satisfies the Output NT Requirements", IEEJ Transactions on Industry Applications, Vol.124, No.9, pp.946-955, 2004-
096YAMAZAKI Katsumi, HARUISHI Yoshihisa, ARA Takahiro: "Harmonic Torque Calculation of Induction Motors Using Electromagnetic Field Analysis", IEEJ Transactions on Industry Applications, Vol.124, No.11, pp.1155-1163, 2004-
095JIAO G, RAHN C D: "Field Weakening for Radial Force Reduction in Brushless Permanent-Magnet DC Motors", IEEE Transactions on Magnetics, Vol.40, No.5, pp.3286-3292, 2004-
094HA K‐H, KIM Y‐K, LEE G‐H, HONG J‐P: "Vibration Reduction of Switched Reluctance Motor by Experimental Transfer Function and Response Surface Methodology", IEEE Transactions on Magnetics, Vol.40, No.2, pp.577-580, 2004-
071SANADA Masayuki, IKEMI Takeshi, MORIMOTO Shigeo, TAKEDA Yoji: "Characteristic Improvement of VR Linear Motor with Enlarged Pole Surface", IEEJ Transactions on Industry Applications, Vol.123, No.7, pp.878-879, 2003-
070MIWA Masahiko, TANI Koji, HASHIMOTO Hiroshi, YAMADA Takashi: "High Accuracy Torque Calculation for a Rotating Machine Using Adaptive Meshing", IEEJ Transactions on Industry Applications, Vol.123, No.7, pp.790-797, 2003-
069KANO Yoshiaki, KOSAKA Takashi, MATSUI Nobuyuki: "Some Considerations on Simple Non-Linear Magnetic Analysis-Based Optimum Design of Multi-Pole Permanent Magnet Machines", IEEJ Transactions on Industry Applications, Vol.123, No.3, pp.196-203, 2003-
068Hideaki Ayano, Hirishi Nagase, Hiromi Inaba: "Highly Efficient Contactless Electrical Energy Transmission System", IEEJ Transactions on Industry Applications, Vol.123, No.3, pp.263-270, 2003-
067ISHIBASHI F, KAMIMOTO K, NODA S, ITOMI K: "Small Induction Motor Noise Calculation", IEEE Transactions on Magnetics, Vol.18, No.3, pp.357-361, 2003-
043Popan, Viorel, Blissenbach: "A Passive rotor Transverse Flux Motor", Workshop on VARIABLE RELUCTANCE ELECTRICAL MACHINES-
042ITORI Kazunobu, NODA Shinichi, ISHIBASHI Fuminori, YAMAWAKI Hisashi: "Young's Modulus of Windings on Finite Element Method for Natural Frequency Analysis of Stator Core in Induction Motor.", JSME-C, Vol.68, No.669, pp.1343-1348, 2002-
041ARITA H, TODAKA T, ENOKIZONO M: "Thermal magnetic characteristic for high frequency induction heating analysis", Journal of applied physics, Vol.91, no.10, pp.8317-8318, 2002-
040KOMETANI Haruyuki, NAKA Kouki, NAKAMOTO Noboru, TSUTSUI Hirotsugu, TATEISHI Tetsuya: "Electro-magnetic analysis for an induction motor at starting point", IEEJ-RM, Vol.SA-02, No.40-57, pp.1-5, 2002-
039TOMIGASHI Yoshio, UETA Tetsuji, KISHIMOTO Keiji, HIDA Hajime: "Considerations on Design for a Cylindrical Moving Magnet Type Linear Oscillatory Actuator having Spring Characteristics", IEEJ Transactions on Industry Applications, Vol.122, No.4, pp.317-322, 2002-
038TOBA Akio, WATANABE Toshiharu, KOGANEI Yoshinori, OHSAWA Hiroshi: "Design and Experimental Evaluations of 5kW-Surface Permanent Magnet Vernier Machines", IEEJ Transactions on Industry Applications, Vol.122, No.2, pp.162-168, 2002-
037HONG J‐P, HA K‐H, LEE J: "Stator Pole and Yoke Design for Vibration Reduction of Switched Reluctance Motor", IEEE Transactions on Magnetics, Vol.38, No.2, pp..929-932, 2002-
012Katsumi Yamazaki: "Electromagnetic Field Analysis and Its Applications to Rotating Machines. Approximated Modeling of End-Rings for Electromagnetic Field Analysis of Induction Motors.", IEEJ Transactions on Industry Applications, Vol.121-D, No.2, pp.184-195, 2001-
011Chikara Kaido: "On the Behavior of Iron Losses in Rotating Machines.", Technical Meeting on Rotating Machinery, IEE Japan, Vol.RM-00, No.110-119.121-138, pp.53-58, 2000-
010OKA H, FUJITA H, SEKI K: "Composition and Heating Efficiency of Magnetic Wood by Induction Heating.", IEEE Transactions on Magnetics, Vol.36, No.5, pp.3715-3717, 2000-
009HASIMOTO Hiroshi, TANI Koji, YAMADA Takashi, HONJO Shoichi, ISHII Hideo, IWATA Yoshihiro: "Finite Element Analysis of AC Losses in Double Helix Superconducting Cables", Joint Technical Meeting on Static Apparatus and Rotating Machinery, IEE Japan, Vol.SA-99, No.1-12, pp.55-58, 1999-
008NERG J, TOLSA K, SILVENTOINEN P, PARTANEN J, PYRHOENEN J: "A Dynamic Model for the Simulation of Induction Heating Devices.", IEEE Transactions on Magnetics, Vol.35, No.5, pp..3592-3594, 1999-
007C.G.C.Neves, R.Carlson, N.Sadowski, J.P.A.Bastos, N.S.Soeiro: "Experimental and Numerical Analysis of Induction Motor Vibrations.", IEEE Transactions on Magnetics, Vol.35, No.3, pp.1314-1317, 1999-
006C.G.C.Neves, R.Carlson, N.Sadowski, J.P.A.Bastos, N.S.Soeiro: "Vibrational Behavior of Switched Reluctance Motors by Simulation and Experimental Procedures.", IEEE Transactions on Magnetics, Vol.34, No.5, pp..3158-3161, 1998-
005ITOMI Kazunobu, NODA Shinichi, SUZUKI Isao, ISHIBASHI Fuminori: "Analysis for Natural Frequencies of Stator Core in Induction Motor", JSME-C, Vol64, No.624, pp.2824-2832, 1998-
004SHIOHATA Koki, NEMOTO Kanako, NAGAWA Yasumasa, SAKAMOTO Shigeru, KOBAYASHI Takashi, ITOU Motoya, KOHARAGI Haruo: "A Method for analyzing Electromagnetic-Force-Induced Vibration and Noise Analysis", IEEJ Transactions on Industry Applications, Vol.118, No.11, pp.1301-1307, 1998-
003R.S.Bains, Hashimoto, H.; Tani, T.;Yamada, T.: "Solution of TEAM Workshop Problem 24: Nonlinear Time-Transient Rotational Test Rig", The TEAM Workshop in the Sixth Round, 1997-
002KOBAYASHI T, TAJIMA F, ITO M, SHIBUKAWA S: "Effect of Slot Combination on Accoustic from Induction Motors", IEEE Transactions on Magnetics, Vol.33, No.2, pp.2101-2104, 1997-
Entries Per Page
Page of


Top of Page