DS

Static/Dynamic Structural (2D/3D)

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC263] IPM Motor Stress Analysis Taking Into Account Friction between Magnets and the Rotor Core

    In this example, in order to evaluate how the contacts between the magnets and the rotor core in an IPM motor affect the stress distribution, the von Mises stress is checked when …

  2. Comprehensive System to Component xEV Simulation Using Gamma Technologies and JMAG

    Joe Wimmer, Gamma Technologies, LLC

  3. [JAC254] Vibration Analysis of a Large Oil-Filled Transformer

    In this example, evaluating vibration caused by electromagnetic excitation in a large transformer. Since large transformers are oil-cooled, in this example the oil, which is the f…

  4. [JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

    In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

  5. [JFT076] Methods for Running Geometry Optimization Using Multiple Studies

    This document describes how to run geometry optimization using multiple studies.

  6. Analyzing Permanent Magnet Motors with Magnetic Field + Structural Coupling Using PSL (Power Simulation Licenses)

    Makoto Matsushita, Toshiba Infrastructure Systems & Solutions Corporation / Takashi Nakaoka, JSOL Corp.

  7. Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening

    Yohei Awata, Denki Kogyo Co.,Ltd.

  8. Low Oscillation Actuator for Force-controlled Medical Robot Arm

    Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.

  9. Investigating the Possibility of Improving Performance by Applying CFRP to Outer Rotor Housing

    Yoshiyuki Sakashita, PUES Corporation

  10. [JFT064] Methods for Motor Vibration Analysis Accounting for Skew Effect with 2D Model

    This document explains methodology for motor vibration analysis accounting for 2D step skew.

  11. [JAC142] Press Fit Analysis of a Divided Core

    This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…

  12. [JAC020] Sound Pressure Analysis of an SPM Motor

    This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …

  13. [JAC198] Bus Bar Thermal Stress Analysis

    Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.

  14. [JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account

    These notes will conduct an analysis of changed vibratory force and show a case study of confirming the impact magnetostriction has on vibration noise.

  15. Utilization of JMAG-RT Using Multi-Case Parallel Calculation

    Tomoya Ueda, NIDEC CORPORATION

  16. Proposal of Electromagnetic Noise-generating Mechanism on Carrier Harmonics

    Yoshitake Kamijo, Toshiba Corporation

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website