TR

Transient Magnetic (3D)

Sort condition
Newest first
Oldest first
Large number of views
  1. [RTML-041] PMSTEP_01

    Type: PMSTEP | Stator(Outside Diameter): 60.0(mm) | Height: 24(mm) | Voltage: DC24(V) | Rotor/Mover: PM

  2. Stray Loss Analysis of Large Power Transformer Using 3D Magnetic Field Analysis

    Masaki Sakuma, Fuji Electric Co., Ltd.

  3. KOBE STEEL, LTD.

    Application of Thin Wire of Soft Magnetic Pure Iron to AC Solenoid

    Shota Iimura, KOBE STEEL, LTD.

  4. Nabtesco Corporation

    Motor Design Study Using Optimization and Thermal Simulation Functions

    Keigo Nakamura, Nabtesco Corporation

  5. Efforts for Thermal Analysis of a Motor at JFE Techno-Research Corporation

    Shin-ya Tanaka, JFE Techno-Research Corporation

  6. Kanzaki Kokyukoki Mfg. Co.,Ltd.

    Examination of Motor Thermal Evaluation by Combining FEA and Thermal Equivalent Circuit

    Yusuke Nakamura, Kanzaki Kokyukoki Mfg. Co.,Ltd.

  7. Development of Magnet Unit for the Endurance Test Equipment of Flexible Devices

    Tomonori Katsuta, Industrial Technology Center of Okayama Prefecture

  8. Rolls-Royce Hungary Kft

    Electrical Machine Loss Simulation and Model Validation Using JMAG and MATLAB Simulink

    Zoltán Nádudvari, Rolls-Royce Hungary Kft

  9. [JAC284] Analysis of Minute Electromagnetic Forces Acting on a Magnet

    In this example, we obtain the minute electromagnetic forces acting on a magnet that is moving translationally.

  10. [JFT033] Eccentricity Setting for Parallelly Moving the Motion Region Initial Location

    This document shows how to set the eccentricity to account for the moving part’s axis remaining parallel to the central axis while moving from the initial position and afterwards.

    • [JFT034] Eccentricity Setting for Parallelly Offsetting the Rotation Axis

      This document shows setting to move the rotation axis in parallel.

      • [JFT035] Eccentricity Setting for Inclining the Motion Region Axis

        This document shows setting to tilt the motion region axis.

        • [JFT021] Setting Magnet Material with Coercive Force Distribution and Residual Magnetic Flux Distribution Considering Temperature Dependence

          This document describes how to set a magnet material with coercive force and residual magnetic flux density taking into account temperature dependence.

        • [JFT036] Eccentricity Setting for Inclining the Rotation Axis

          This document shows setting to tilt the rotation axis.

          • [JAC219] Axial Gap Type Motor Cogging Torque Analysis

            In this example, presents an example of cogging torque analysis of an axial gap type motor.

          • [JFT102] Setting 3D Model Coils Using the Winding Editor

            This document explains methods for setting the coils of a 3D model using the winding editor.

            Search Filter

            • All Categories

            Remember me
            Sign In
            Create an account (Free) About authentication ID for JMAG website