Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-052] WFSM_04
Type: WFSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 40(mm) | Voltage/Current: DC240(V)/84.8(A), DC300(V)/50(A) | Rotor/Mover: WF | Number of Phases: 3
-
[JAC018] Thermal Analysis of a Motor
In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…
-
[JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss
In this example, an IPM motor efficiency map that accounts for AC loss from a PWM is created, and a comparison with an efficiency map that does not account for AC loss is performe…
-
[RTML-051] WFSM_03
Type: WFSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 150(mm) | Voltage/Current: DC240(V)/84.8(A), DC300(V)/15(A) | Rotor/Mover: WF | Number of Phases: 3
-
[JAC253] Analysis of an Induction Generator
In this example, the relationship between the output power and efficiency of the induction generator is shown here.
-
[RTML-038] IM Constant rating 10(kW)
Type: IM | Max Power: 10(kW) | Stator(Outside Diameter): 500(mm) | Height: 300(mm) | Voltage/Current: DC500(V)/250(A) | Rotor/Mover: Cage
-
[RTML-037] IM Constant rating 1(kW)
Type: IM | Max Power: 1(kW) | Stator(Outside Diameter): 134(mm) | Height: 42(mm) | Voltage/Current: DC100(V)/5(A) | Rotor/Mover: Cage
-
[L-MB-30] Accurately Identifying Motor Characteristics During Control with JMAG-RT
In general, the characteristics of motor models used in control circuit simulation of a motor drive system are often assumed to be constant when the motor is in drive mode.
-
[L-SE-163] High Performance Massive Case Calculations
Taking the traction motor, auxiliary motor, and reactor as models to be analyzed, presented in this report is the performance for simultaneously running 100 cases by using Power S…
-
[JAC126] Magnetization Analysis Accounting for Eddy Currents
This Application Note presents how to obtain the magnetization field distribution accounting for eddy currents in the magnetic material to be magnetized, the eddy current density …
-
[JAC288] Synchronous Reluctance Motor Topology Optimization
In this example, topology optimization is used to minimize the torque ripple and maximize the average torque when exploring the rotor geometry.
-
[JAC216] Simulation of a Claw-Pole Type Alternator Using a Control Simulator and JMAG-RT
In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.
-
[L-HU-168] Fast Solving of Large Scale Model Using Massive Parallel Processing
One option for accurate loss analysis is 3D analysis. However, the number of elements often reaches into the millions, limiting its use in terms of calculation cost. In order to i…
-
[RTML-046] ALTERNATOR_01
Type: ALTERNATOR | Stator(Outside Diameter): 140(mm) | Height: 45(mm) | Voltage: DC200(V) | Rotor/Mover: WF
-
[RTML-045] LSM_01
Type: LSM | Max Power: 2(kW) | Voltage: DC400(V) | Rotor/Mover: SPM
-
[RTML-041] PMSTEP_01
Type: PMSTEP | Stator(Outside Diameter): 60.0(mm) | Height: 24(mm) | Voltage: DC24(V) | Rotor/Mover: PM