Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC002] Cogging Analysis of a PM Linear Motor
This note presents how to obtain cogging torque, a cause of thrust variation, and evaluate the thrust force and attraction force during drive.
-
[JAC001] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note introduces a case example of how to obtain the current density distribution of an auxiliary conductor and its rotation speed versus torque characteristics.
-
[JAC009] Sound Pressure Analysis of a Loudspeaker
This Application Note presents how the frequency characteristics of sound pressure can be obtained using the constant Lorenz force on the voice coil, regardless of the frequency.
-
[JAC006] Analysis of the SR Motor Torque Ripple
This Application Note explains how to carry out a torque analysis that changes the switch conversion timing and evaluate both the torque ripples and average torque in an SR motor.
-
[JAC014] Inductance Analysis of a Bus Bar
This note presents a case study on the current distribution and the frequency versus inductance characteristic of the bus bar.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC003] Analysis of a Permanent Magnet Brush Motor
This document introduces how the characteristics of the brush-type PM motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux de…
-
PSIM: An Expandable Dynamic Simulation Platform for the Analysis and Design of Power Electronics and Motor Drivee Systems
Hua Jin, Powersim Inc.
-
200 KW PERMANENT MAGNET ALTERNATOR ANALYSIS & COMPARISON TO TEST RESULTS
James R Hendershot, Motorsoft Div & Fisher Electric Technology
-
The SPEED Motor Design Software
Malcolm McGilp, University of Glasgow
-
Comparison to Measurements of Combined Simulation with RT Model of IPM Motor
Yukari Toide, Mitsubishi Electric Corporation
-
Practical Use of Connected Electro-circuit Simulation with Electromagnetic Analysis in the Development of Robot Actuator
Takeo Kishida, Sony Corporation
-
Analysis of RF devices using JMAG-Studio -Evaluation of transmission characteristics of RFID and RF splitters-
Takashi Takeo, Mie University
-
Promotion to Spread JMAG to Actuator Development and Applications
Hideyuki Watanabe, Keihin-corp.co.jp
-
Dynamic Analysis of the PM stepping motor by behavior model and circuit simulator
Kaoru Miyazaki, SANYO Seimitsu Co.,Limited
-
3D Design of Electrical Machines using JMAG-Studio
Goran Nord, Hoganas AB
