Thermal

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC047] High-Frequency Induction Heating Analysis of a Crankshaft

    This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…

  2. Finite Element Analysis of a Steering Rack Shaft Subjected to the High-Frequency Induction Hardening Process

    Manabu Fukumoto,Katsuhiko Kizawa,Kazuo Okamura,Atsuhiko Ohta, Sumitomo Metal Industries, Ltd/JTECT Corporation

  3. [JAC048] High-Frequency Induction Heating Analysis of a Printer Roller

    This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

  4. [JAC100] Surface Heating Analysis of a Steel Plate

    This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …

  5. [JAC118] Thermal Analysis of a Bus Bar

    This Application Note presents how to obtain the temperature distribution in a bus bar or the like with changes in the power supply frequency.

  6. [JAC044] Resistance Heating Analysis of a Steel Sheet

    This Application Note presents how to obtain the calculate current density distribution, Joule loss distribution and temperature distribution of steel sheet.

  7. [JAC123] Thermal Analysis of a Choke Coil

    This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.

  8. [JAC127] Resistance Heating Analysis of Steel

    This Application Note presents how to obtain the temperature distribution, temperature variations, and heat flux distribution in a body heated by ohmic heating.

  9. [JAC130] Thermal Conductivity Analysis of Basic Geometry

    In this Application Note, the analysis accuracy is investigated by comparing the temperatures obtained through analysis in each part with theoretical values.

  10. Examination of an induction heating simulation using the B-H curve

    Takashi Horino,NETUREN CO.,LTD.

  11. Examples Utilizing JMAG

    Shunsuke Funaji,Mitsui Engineering & Shipbuilding co.,ltd

  12. AcuSolve: 3D Thermal Flow Analysis of JMAG Results

    Farzin Shakib, ACUSIM Software, Inc.

  13. [JAC133] Thermal Analysis of a Three-phase Transformer

    This Application Note presents an example of how to confirm a temperature distribution using the iron and copper losses of a three-phase transformer as heat sources.

  14. Issue 5 Versatile Mapping that Supports Multiphysics Simulations

    Elaborate Modeling TechnologyThese technical reports introduce the scope of JMAG's technological development. This, the 5th edition of the technical reports, provides a glimpse of…

  15. Supporting Excelled Motor Development – Challenges of Motor Development and the Increasing Role of JMAG –

    Motor Development Using JMAGThis series of technical reports discusses the challenges of motor development and the increasing role of JMAG. In the first edition of this series, we…

  16. Introduction for the utilization techniques of JMAG for transformer design

    Takayuki NISHIO, JSOL Corporation

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website