JMAG-RT
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-047] PMSM/IPM Constant rating 75(kW) 3-phase
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC243] Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT
In this example, circuit simulation is performed to control the position of a mover by loading a JMAG-RT model for a voice coil motor into a control/circuit simulator.
-
Solenoid Valve Development Using Magnetic Field Analysis Coupled Technology
Naoki Tsuduki, Aisan Industry Co., Ltd.
-
Building the Prediction Process for Motor Noise by Co-Simulation Electromagnetic Circuit and Structure Transfer System
Makoto Kawaguchi, Mazda Motor Corporation
-
Electrical Machine Loss Simulation and Model Validation Using JMAG and MATLAB Simulink
Zoltán Nádudvari, Rolls-Royce Hungary Kft
-
Example of Using JMAG-RT for High-Voltage Systems in the Toyota Hybrid System Application to Verification of Feasibility Before Actual Machine Test
Toshifumi Yamakawa, TOYOTA MOTOR CORPORATION
-
Model-Based Solution for Efficient Motor Control System Development
Atsushi Katagiri, MathWorks Japan
-
[JFT012] JMAG-RT Model Generation of Wound-Field Synchronous Motor
This document shows how to generate a JMAG-RT model of a wound-field synchronous motor and how to execute control simulation using a JMAG-RT model in MATLAB/Simulink.
-
[JFT077] Creating JMAG-RT Models with Generic Circuit Topology
This document describes the method for creating plant models (JMAG-RT models) with generic circuit topology.
-
[JFT069] Performing Harmonic Loss Calculations Accounting for Current Control with JMAG-Designer and JMAG-RT
In this document, how to calculate the harmonic loss of a current controlled (PWM controlled) PM motor at high speed using a JMAG-RT model is presented.
-
Yanmar Holdings Co., Ltd.
Based on the concept of “realizing a sustainable resource recycling society that leads to the future” the company continues to make technological advances looking ahead to the nex…
