Property Settings for Mesh Condition

Constraint Mesh(ConstraintMesh)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
FileName	String		The path of the reference file
FileName_DataSourceType	Flag	0 or ResultFile 1 or ProjectFile 2 or CurrentProject 3 or AnalysisGroup	Specified data source type for plot file use result file for data source type. use project file for data source type. use current project for data source type. use analysis group for data source type.
FileName_ProjectFile	String		Specified project file for project file type
FileName_ProjectFile_StudyId	Flag		Specified study id for project file type
FileName_ProjectFile_CaseId	Flag		Specified case id for project file type
FileName_CurrentProject_StudyId	Flag		Specified study id for current project type
FileName_CurrentProject_CaseId	Flag		Specified case id for current project type
FileName_AnalysisGroup_StudyId	Flag		Specified study id for analysis group type
FileName_CoordinateId	Coordinate		The coordinate system for reference.

Skin Depth(SkinDepth)

The face setting for create mesh size.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Depth	Double		The skin depth
Division	Flag		The number of divisions
CommonRatio	Double		The division ratio

Rotation Periodic Mesh (Detailed)(RotationPeriodicMeshDetailed)

Rotation Periodic Mesh (Detailed) properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
InnerOrigin	Vector		The point on rotation axis of inner gap.
InnerDirection	Vector		The base direction of inner gap
InnerPatternAngle	Double		The rotation periodic pattern angle of inner gap.
InnerStartAngle	Double		The copy start angle of inner gap.
InnerMirrorCopy	Flag	0 or Off 1 or On	The mirror copy check of inner gap. The mirror copy is off. The mirror copy is on.
InnerInsideRadius	Double		The inside radius to copy of inner gap.
InnerOutsideRadius	Double		The outside radius to copy of inner gap.
InnerElementSize	Double		The element size of inner gap.
InnerAirRegionCopy	Flag	0 or Off 1 or On	The flag of air region copy of inner gap. The air region copy is off. The air region copy is on.
OuterOrigin	Vector		The point on rotation axis of outer gap.
OuterDirection	Vector		The base direction of outer gap
OuterPatternAngle	Double		The rotation periodic pattern angle of outer gap.
OuterStartAngle	Double		The copy start angle of outer gap.
OuterMirrorCopy	Flag	0 or Off 1 or On	The mirror copy check of outer gap. The mirror copy is off. The mirror copy is on.
OuterInsideRadius	Double		The inside radius to copy of outer gap.
OuterOutsideRadius	Double		The outside radius to copy of outer gap.
OuterElementSize	Double		The element size of outer gap.
OuterAirRegionCopy	Flag	0 or Off 1 or On	The flag of air region copy of outer gap. The air region copy is off. The air region copy is on.
InnerAxis2D	Flag	0 or Upward 1 or Downward	The rotation axis of inner gap in 2D-Model. The upward direction. The downward direction.
OuterAxis2D	Flag	0 or Upward 1 or Downward	The rotation axis of outer gap in 2D-Model. The upward direction. The downward direction.
GapType	Flag	0 or Radial 1 or Axial	The selection of gap type The radial gap type. The axial gap type.
InnerAxis	Vector		The rotation axis of inner gap.
InnerLowerBound	Double		The lower bound of copy height of inner gap.
InnerUpperBound	Double		The upper bound of copy height of inner gap.
OuterAxis	Vector		The rotation axis of outer gap.
OuterLowerBound	Double		The lower bound of copy height of outer gap.
OuterUpperBound	Double		The upper bound of copy height of outer gap.

Part Relation(PartRelation)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Type	Flag	0 or Translate 1 or Rotate	The translation required to map the mesh from the parent to the child parts Use a translation to map the mesh from parent to child part Use a rotation to map the mesh from parent to child part
Origin	Vector		The rotation center point
Axis	Vector		The rotation axis

Element size <Rectangle Remesh>(Rectangle)

Mesh size setting for rectangle

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size for cylinder
CoordinateSystem	Coordinate		The reference coordinate system
LowestPoint	Vector		The first diagonal point
HighestPoint	Vector		The second diagonal point

Element size <Ring Remesh>(Ring)

Mesh size setting for ring

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size for cylinder
InnerRadius	Double		The inner radius remeshing
OuterRadius	Double		The outside radius remeshing
LowerHeight	Double		The lower height remeshing
UpperHeight	Double		The upper height remeshing
Origin	Vector		Origin
Axis	Vector		The axis

Rotation Periodic Mesh (Automatic)(RotationPeriodicMeshAutomatic)

Rotation Periodic Mesh (Automatic) properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
GapType	Flag	0 or RadialGap 1 or AxialGap 2 or AutomaticDetection	The gap type Use radial gap type Use axial gap type Automatically determine gap type.

Element size <Box Remesh>(Box)

Mesh size setting for box

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size for cylinder
CoordinateSystem	Coordinate		The reference coordinate system
LowestPoint	Vector		The first diagonal point
HighestPoint	Vector		The second diagonal point

Element size <Cylinder Remesh>(Cylinder)

Mesh size setting for cylinder

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size for cylinder
InnerRadius	Double		The inner radius remeshing
OuterRadius	Double		The outside radius remeshing
LowerHeight	Double		The lower height remeshing
UpperHeight	Double		The upper height remeshing
Origin	Vector		Origin
Axis	Vector		The axis

Thin Solid(ThinSolid)

Thin solid mesh setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
DivisionType	Flag	0 or BothSides 1 or OneSide	The type of division Create mesh from both sides Create mesh from one side
FlgType	Flag	0 or Parts 1 or Faces	The type of designation Create mesh from parts Create mesh from faces
CommonRatio	Double		The division ratio of thickness
Division	Flag		The number of divisions

Mesh Defeature Fillet(DefeatureFillet)

Mesh Defeature Fillet properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
MaxRadius	Double		The maximum radius
MaxAngle	Double		The maximum angle
NumCurvatureSamples	Flag		The number of samples

Element size <Extrusion Direction Face>(ExtrusionDirectionFace)

Mesh size setting for extrusion direction faces

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size on a face

Element Size <Face>(Face)

Mesh size setting for model faces

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size on a face

Element Size Slide(ElementSizeSlide)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SlideId	Flag		The slide number
SlideTable	Table		element size table

Extended Slide (Rotation)(ExtendedSlide)

Extended Slide (Rotation)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
InsideRadius	Double		The inside radius
OutsideRadius	Double		The outside radius
LowerHeight	Double		The lower height
UpperHeight	Double		The upper height
CircumferentialDivision	Flag		The circumferential division

Delete Duplicate Nodes(DeleteDuplicateNode)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SelectAllParts	Flag	0 or Off 1 or On	The flag of select all parts Select parts manually Select all parts
UseDefaultValues	Flag	0 or Off 1 or On	The flag of use default values Use the input values Use default values
ToleranceDuplicateNode	Double		The tolerance of duplicate nodes
OnlyNodesSurface	Flag	0 or Off 1 or On	The flag of target only the nodes on the part surface Don't target only the nodes on the part surface Target only the nodes on the part surface

Element size <Edge>(Edge)

Mesh size setting for model edges

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size on a edge

Mesh Defeature Hole(DefeatureHole)

Mesh Defeature Hole properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
MaxDiameter	Double		The maximum diameter
SphericalHole	Flag	0 or Off 1 or On	Hole flag on sphere The hole on the sphere is not considered. The hole on the sphere is considered.

Mesh Morphing GeometryType(MeshMorphingGeometryType)

Mesh Morphing GeometryType properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
GeometryType	Flag	0 or Line 1 or Arc 2 or Plane 3 or CylinderSide	The geometry type The geometry type is a line. The geometry type is an arc. The geometry type is a plane. The geometry type is cylinder side.

Auto Healing(AutoHealing)

The auto healing setting for creating mesh.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SelectAllParts	Flag	0 or Off 1 or On	The flag of select all parts Select parts manually Select all parts
FixInconsistencyParts	Flag	0 or Off 1 or On	The flag of fixing inconsistency parts Not fix inconsistency parts Fix inconsistency parts
RemoveSmallGeometry	Flag	0 or Off 1 or On	The flag of removing small geometry Not remove small geometry Remove small geometry
SmallGeometryLengthTolerance	Double		The length tolerance of small geometry
SmallGeometryAreaTolerance	Double		The area tolerance of small geometry
RemoveMisalignment	Flag	0 or Off 1 or On	The flag of removing Misalignment Not remove misalignment Remove misalignment
LengthToleranceMisalignment	Double		The length tolerance of misalignment
AngleToleranceMisalignment	Double		The angle tolerance of misalignment

Coating_in_LayerCoating(LayerCoatingData)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Thickness	Double		The thickness of the layered coating
Division	Flag		The number of mesh divisions in the coating
CoatingMaterial			The coating material for the layered mesh

Layered Mesh(LayerMesh)

Layer mesh properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Thickness	Double		The thickness of the layered mesh
Division	Flag		The number of divisions in the layered mesh
LaminationFactor	Double		The lamination factor for the layered mesh
SteelSheetMaterial			The steel sheet material for the layered mesh
InsulationMaterial			The insulation material for the layered mesh
ThicknessType	Flag	1 or OneSheet 2 or OverallThickness	Flag to control the thickness type. Specify the thickness of one sheet. Specify the overall thickness.
SteelSheetThickness	Double		The thickness per a steel sheet
NumberOfDivisionPerHalfOfSheet	Flag		The number of division per half of sheet
DivisionRatio	Double		The division ratio

Mesh Morphing Radial(MeshMorphingRadial)

Mesh Morphing Radial properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Displacement	Double		The displacement
UseAxis	Flag	0 or Off 1 or On	Specify that the center axis is used The center axis is not used The center axis is used
FixedAxis	Flag	0 or Off 1 or On	The center axis is fixed The center axis is not fixed The center axis is fixed
Origin	Vector		The rotation center point
Axis	Vector		The rotation axis

Mesh Morphing Circumferential(MeshMorphingCircumferential)

Mesh Morphing Circumferential properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
RotationAngle	Double		The rotation angle
Origin	Vector		The rotation center point
Axis2D	Flag	0 or Upward 1 or Downward	The direction of axis in the 2D model The direction of axis is parallel to (0,0,1). The direction of axis is parallel to (0,0,-1).
Axis	Vector		The rotation axis

Channel(MeshChannel)

Mesh channel

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
ChannelType	Flag	0 or Suppress 1 or AxialDirection	The channel type The channel type is suppress The channel type is axis direction
ChannelShape	Flag	0 or CircularChannel 1 or RectangularChannel	The channel shape The channel shape is circle The channel shape is Rectangle
CircularDiameter	Double		The circular diameter
NumberOfChannel	Flag		The number of channel
RectangularChannelWidth	Double		The rectangular channel width
RectangularChannelHeight	Double		The rectangular channel height
ReferenceAxisAngle	Double		the angle from the reference axis
PitchDiameter	Double		The pitch diameter
Origin	Vector		The rotation center point
ReferenceDirection	Vector		The reference direction
ChannelLengthUpper	Double		The channel length upper
ChannelLengthLower	Double		The channel length lower
Axis	Vector		The rotation axis

Thin Shell(ThinShell)

Thin shell mesh setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Thickness	Double		The thickness of the shell
Division	Flag		The number of divisions

Extended Slide (Translation)(ExtendedSlideTranslation)

Extended Slide (Translation)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
LowestPoint	Vector		The first diagonal point
HighestPoint	Vector		The second diagonal point
Size	Double		The element's size for motion direction
CoordinateSystem	Coordinate		The reference coordinate system
InsideRadius	Double		The inside radius
OutsideRadius	Double		The outside radius
LowerHeight	Double		The lower height
UpperHeight	Double		The upper height

Extrusion Direction(ExtrusionDirection)

Extrusion Direction properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SelectAllParts	Flag	0 or Off 1 or On	The flag of select all parts Select parts manually Select all parts
Direction	Vector		The direction for the extrusion

Mesh Morphing Linear(MeshMorphingLinear)

Mesh Morphing Linear properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Displacement	Double		The displacement
Direction	Vector		The direction for the displacement

Air Mesh Element Size <Box>(AirMeshBox)

Air mesh size setting for rectangular region

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size for box
CoordinateSystem	Coordinate		The reference coordinate system
LowestPoint	Vector		The first diagonal point
HighestPoint	Vector		The second diagonal point

Air Mesh Element Size <Cylinder>(AirMeshCylinder)

Air mesh size setting for cylindrical region

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size for cylinder
InnerRadius	Double		The inner radius remeshing
OuterRadius	Double		The outside radius remeshing
LowerHeight	Double		The lower height remeshing
UpperHeight	Double		The upper height remeshing
Origin	Vector		Origin
Axis	Vector		The axis

Mesh property(MeshProperty)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
KeepExistingMesh	Flag	0 or Off 1 or On	Flag to keep existing mesh All parts are remeshed Existing mesh is kept
MeshType	Flag	0 or Normal 1 or Slide 2 or Patch	Flag of Mesh Type Flag of Normal Mesh Flag of Slide Mesh Flag of Patch Mesh
RadialDivision	Flag		Radial Division of Slide Mesh
CircumferentialDivision	Flag		Circumferential division
SlideMeshSize	Double		The translation slide mesh size
AutoSlide	Flag	0 or Off 1 or On	Flag of Automatic Setting of Movement for Slide Mesh The motion condition does not affect the movement of slide mesh. The motion condition affects the movement of slide mesh.
AutoGapDivision	Flag	0 or Off 1 or On	Use automatic slide radial / gap division setting Do not automatic slide radial / gap division setting. Automatic slide radial / gap division setting.
AutoDivision	Flag	0 or Off 1 or On	use automatic slide division setting Do not automatic slide division setting. Automatic slide division setting.
AirRegionNumLayers	Flag		air region num layers
AirRegionThickness	Double		air region thikness
AutoSlideElementSize	Flag	0 or Off 1 or On	use automatic slide element size setting Do not set slide element size setting automaticly. Automatic slide element size setting.
AxisDirectionElementSize	Double		The axis direction element size
MultiSlide	Flag	0 or SingleSlide 1 or MultipleSlide 2 or ExtendedSlideOld 3 or ExtendedSlide 4 or ExtendedSlideConsistent	use multiple slide planes The single slide plane The multiple slide planes The extended slide planes used until V18.0 The extended slide planes used until V24.1 The consistent extended slide planes
SlideTable	Table		multi-slide division table
SlideTableTranslation	Table		multi-slide element table
SlideTable2D	Table		multi-slide division table
SlideTableTranslation2D	Table		multi-slide element table
SlidePlaneDefine	Flag	0 or NormalVector 1 or CoordinateSystem	Definition of slide plane Specify normal vector Specify coordinate System
SlideMeshGapDirectionNormal	Vector		The normal vector of slide plane
SlideMeshGapDirection	Coordinate		The coordinate system for slide plane
%2dMeshingMethod	Flag	1 or Method1 2 or Method2 3 or Method3	Flag of 2D meshing method The old meshing method used until V.10.2 The new meshing method using after V.10.3 The method to determine automatic element size meshing
MeshingMethod	Flag	1 or AutoMesh 2 or SemiAutoMesh 3 or ExtrudedMesh 4 or SemiAutoMeshAutoSetting 5 or ExtrudedMeshAutoSetting	Flag of meshing method Auto meshing method Semi auto meshing method The extrusion meshing method The semi auto meshing method (Automatic element size) The extrusion meshing method (Automatic element size)
SubdivideAutomatically	Flag	0 or Off 1 or On	Automatic mesh subdivision flag Do not automatically subdivide Automatically subdivide
AirRegion	Flag	0 or Off 1 or On 2 or ForceAndTorque	Flag of Creating Air Region The air region is not created. The air region is created. The air region is created for force and torque calculation.
AirRegionScale	Double		Scale of Air Region
AirRegionHeight	Double		Height of Air Region Relative to Model
AutoMeshSize	Flag	0 or Off 1 or On	Flag of Automatic Mesh Size The mesh size is defined manually. The mesh size is defined automatically.
MeshSize	Double		Mesh Size
AutoAirMeshSize	Flag	0 or Off 1 or On	Flag of automatical air region mesh size The air mesh size is defined manually. The air mesh size is defined automatically.
AirMeshSize	Double		Air Mesh Size
ElementOrder	Flag	1 2 3	Order of elements First Order Elements Second Order Elements Third Order Elements
ContactRecognitionType	Flag	0 or Automatic 1 or Strict 2 or Tolerant	The flag of the method of contact recognition of parts The automatic method The Strict method The Tolerant method
Adaptive	Flag	0 or Off 1 or On	Flag of Adaptive Mesh which is Set as Study Property Not calculating adaptive mesh Calculating adaptive mesh
MaxAdaptiveIteration	Flag		The number of iterations in adaptive mesh which is set as study property.
ErrorThreshold	Double		The ratio of permissible error which is set as study property.
Remesh	Flag		The number of iterations of remesh in one stage
AdaptiveNodalForceConvergenceCheck	Flag	0 or Off 1 or On	The flag to terminate adaptive meshing when force error limit is reached Do not check electromagnetic force during adaptive meshing Check electromagnetic force during adaptive meshing
ForceErrorLimit	Double		Adaptive mesh convergence tolerance for electromagnetic force
AccelerateSubdivision	Flag	0 or Off 1 or On	The flag to control extra element subdivision at each stage No extra element subdivision at each stage Use extra element subdivision at each stage
LeaveResults	Flag	0 or Off 1 or On	The flag of leave the results of each stage Do not leave the result of each stage Leave the results of each stage
AirRegionOutputResult	Flag	0 or Off 1 or On	The flag for controlling air region output The air region is not output. The air region is output
PrioritiseExtrusion	Flag	0 or Off 1 or On	The priority extrusion mesh flag Do not priority extrusion mesh Priority extrusion mesh
ExtrusionAutoMeshSize	Flag	0 or Off 1 or On	The flag of automatical extrusion mesh size The extrusion mesh size is defined manually. The extrusion mesh size is defined automatically.
ExtrusionDirectionMeshSize	Double		The extrusion mesh size.
ExtrusionAutoAirMeshSize	Flag	0 or Off 1 or On	The flag of automatical extrusion air mesh size The extrusion air mesh size is defined manually. The extrusion air mesh size is defined automatically.
ExtrusionDirectionAirMeshSize	Double		The extrusion air mesh size.
SkewgapFilling	Flag	0 or Off 1 or On	The flag to skew gap filling Skew gap filling is not carried out. Skew gap filling is carried out.
ExtendedSlideMeshSize	Double		The translation extended slide mesh size
ExtendedCircumferentialDivision	Flag		The extended slide circumferential division
ConsistentExtendedCircumferentialDivision	Flag		The consistent extended slide circumferential division
MorphingMovingNode	Flag	0 or Off 1 or On	Flag to control movement of adjacent nodes when morphing Allow adjacent nodes to move when morphing Do not move adjacent nodes when morphing
AirRegionDirection	Flag	0 or Off 1 or On	Flag to control air region scale by direction. Set all directions at once. Set for each direction.
AirRegionScaleX	Double		The scale of air region in x(circumferential, first, motion) direction
AirRegionScaleY	Double		The scale of air region in y(radial, second, height) direction
AirRegionScaleZ	Double		The scale of air region in z(axis, third, width) direction
CoreSettingType	Flag	0 or Automatic 1 or Specified	Flag to specify machine core for mesh Automatically select number of cores for meshing Specify number of cores for meshing
NumberOfMeshCores	Flag		The number of cores to use for meshing
AutomaticDensityGradient	Flag	0 or Off 1 or On	Flag to set density gradient automatically Not set density gradient automatically Set density gradient automatically
AutomaticDensityGradient3D	Flag	0 or Off 1 or On	Flag to set density gradient automatically Not set density gradient automatically Set density gradient automatically
PartMeshDensityGradient	Double		Mesh density gradient of parts
AirRegionMeshDensityGradient	Double		Mesh density gradient of air region

Mesh Defeature Chamfer(DefeatureChamfer)

Mesh Defeature Chamfer properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
MaxWidth	Double		The maximum width
MaxAngle	Double		The maximum angle

Mesh Feature Fillet(MeshFillet)

Mesh Feature Fillet properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Radius	Double		The radius
MaxAngle	Double		The maximum angle

Element size <Extrusion Direction Part>(ExtrusionDirectionPart)

Mesh size setting for extrusion direction parts

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size of a part

Element Size <Part>(Part)

Mesh size setting for model parts

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size of a part

Skew(MeshMorphingSkew)

Skew properties setting

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SkewType	Flag	0 or Continuous Skew 1 or V Skew	The skew type Use continuous skew. Use V skew.
SkewAngle	Double		The skew angle
InnerRadius	Double		The skew range inner radius
OuterRadius	Double		The skew range outside radius
LowerHeight	Double		The skew range lower height
UpperHeight	Double		The skew range upper height
Origin	Vector		Origin
Axis	Vector		The axis

Element size <Vertex>(Vertex)

Mesh size setting for model edges

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Size	Double		The element's size on a vertex