Material Settings for Structural Analysis

The property name and flags specified as arguments when setting the materials are provided below.
These are mainly used for the commands in the Material class.

Structural Part Property(StructuralPartProperty)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Thickness	Double		The thickness
Inertia	Double		The cross-sectional moment of inertia against bending
ShearRatio	Double		The transverse shear thickness ratio
TopSurface	Double		the distance from the neutral plane to the top surface
BottomSurface	Double		the distance from the neutral plane to the bottom surface
CrossSectionType	Flag	0 or Circle 1 or Square 2 or Rectangular	The section type The section is circle The section is square The section is rectangular
CircleRadius	Double		The radius of circle section
Height	Double		The length of the square section or the vertical length of the rectangular section
Width	Double		The horizontal edge length of the rectangular section
CoordinateType	Flag	0 or Unset 1 or Rectangular 2 or Cylindrical	The coordinate system in the loss calculation The loss is calculated for basic rectangular coordinate system. The loss is calculated for rectangular coordinate system. The loss is calculated for cylindrical coordinate system.