Condition Settings for Structural Analysis

Surface Load(SurfaceLoad)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Type	Flag	0 or Constant 1 or PointArray	The load type The type is constant The type is point array
Load	Double		The load value
Phase	Double		The phase
FlagCyclic	Flag		The flag cyclic
LoadTable	Table		The amplitude and phase versus frequency table
Direction	Vector		The direction of the load

Pressure Load(PressureLoad)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Direction	Flag	-1 or Inflow 1 or Outflow	The flag for the direction of the load Positive load is into the part Positive load is out of the part
Load	Double		The load value
Phase	Double		The phase
FlagCyclic	Flag		The flag cyclic
LoadTable	Table		The amplitude versus time table
Type	Flag	0 or Constant 1 or PointArray	The load type The type is constant The type is point array

Temperature Load(TemperatureLoad)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Type	Flag	0 or Constant 1 or Distribution 2 or DifferenceDistribution 4 or DirectCoupling	The temperature distribution type The constant temperature type The temperature distribution type The temperature difference distribution type The temperature depends on direct coupling
Temperature	Double		The constant temperauture
ResultFile	String		The reference result file which is a thermal analysis result file
ResultFile_DataSourceType	Flag	0 or ResultFile 1 or ProjectFile 2 or CurrentProject 3 or AnalysisGroup	Specified data source type for plot file use result file for data source type. use project file for data source type. use current project for data source type. use analysis group for data source type.
ResultFile_ProjectFile	String		Specified project file for project file type
ResultFile_ProjectFile_StudyId	Flag		Specified study id for project file type
ResultFile_ProjectFile_CaseId	Flag		Specified case id for project file type
ResultFile_CurrentProject_StudyId	Flag		Specified study id for current project type
ResultFile_CurrentProject_CaseId	Flag		Specified case id for current project type
ResultFile_AnalysisGroup_StudyId	Flag		Specified study id for analysis group type
ResultFile_StartRow	Flag		The start row number for reading file
ResultFile_SkipFirstColumn	Flag	0 or Off 1 or On	The flag for not using first column as ID Use first column as ID. Not use first column as ID.
ResultFile_UseAutoSearchDistance	Flag	0 or Off 1 or On	The flag for using automatically decided search distance The search distance is not decided automatically. The search distance is decided automatically.
ResultFile_SearchDistance	Double		The search distance
ResultFile_CoordinateId	Coordinate		The coordinate system for reference.
Step	Flag		The step for reference of temperature from the result file
StartStep	Flag		The reference step for the determining the temperature difference with that of target step.
TimeVariant	Flag	0 or Constant 1 or ChangeWithTime	The flag of time variant Constant Change with time
IntervalOfStructureStep	Flag		Interval of structure step

Acceleration Load(AccelerationLoad)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Acceleration	Double		The acceleration
Direction	Vector		The direction of the acceleration

Electromagnetic Force(ElectromagneticForce)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
ResultFile	String		The reference result file which is a magnetic analysis result file
ResultFile_DataSourceType	Flag	0 or ResultFile 1 or ProjectFile 2 or CurrentProject 3 or AnalysisGroup	Specified data source type for plot file use result file for data source type. use project file for data source type. use current project for data source type. use analysis group for data source type.
ResultFile_ProjectFile	String		Specified project file for project file type
ResultFile_ProjectFile_StudyId	Flag		Specified study id for project file type
ResultFile_ProjectFile_CaseId	Flag		Specified case id for project file type
ResultFile_ProjectFile_ResultTypeIndex	Flag		Specified result type index for project file type
ResultFile_CurrentProject_StudyId	Flag		Specified study id for current project type
ResultFile_CurrentProject_CaseId	Flag		Specified case id for current project type
ResultFile_CurrentProject_ResultTypeIndex	Flag		Specified result type index for current project type
ResultFile_AnalysisGroup_StudyId	Flag		Specified study id for analysis group type
ResultFile_AnalysisGroup_ResultTypeIndex	Flag		Specified result type index for current project type
ResultFile_CoordinateId	Coordinate		The coordinate system for reference.
InputFile	String		The reference jcf file which is a magnetic analysis input file
Type	Flag	0 or Step 1 or Frequency	The step type The magnetic force result is referenced by steps. The magnetic force result is referenced by frequency.
StartStep	Flag		The start step to refer the force result
EndStep	Flag		The end step to refer the force result
Frequency	Double		The frequency
FFTResolution	Flag		The fft resolution
CoordinateSystem	Coordinate		The reference coordinate system
FlagAutoExtend	Flag	0 or On 1 or Off	The flag of auto 3D extension Auto extend Specify parameters
ExtendDistance	Double		The height of 3D extension
ExtendDivision	Flag		The divisions of 3D extension
CouplingType	Flag	0 or OneWay 1 or TwoWay	The flag for the Coupling Type Coupling type is One Way Coupling type is direct
ForceMappingMethod	Flag	0 or ForceDensity 1 or Direct	Flag to control how to map the force Map using force density. Direct mapping.
FrequencyMagnification	Double		The frequency magnification
FlagCyclic	Flag	0 or Off 1 or On	The flag cyclic Not periodic Periodic
FlagMotion	Flag	0 or Off 1 or On	The flag motion of magnetic field analysis Not consider the motion Consider the motion
TimeMagnification	Double		The time magnification

Centrifugal Force(CentrifugalForce)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
AngularVelocity	Double		The angular velocity
Axis	Vector		The rotation axis
Origin	Vector		The rotation center point
ForceType	Flag	0 or Constant 1 or PointArray	The flag of force type Constant revolution speed Speed point sequence
ForceTable	Table		The amplitude versus time table

Sound Pressure(SoundPressure)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Radius	Double		The radius
ReferenceCoordinateSystem	Coordinate		The coordinate system for reference.
CircumferentialDivision	Flag		Number of divisions around the circumference
YZSymmetricBoundary	Flag	0 or Off 1 or On	The flag of symmetric a boundary face on yz plane There is not a symmetric boundary face on yz plane There is a symmetric boundary face on yz plane
ZXSymmetricBoundary	Flag	0 or Off 1 or On	The flag of symmetric a boundary face on zx plane There is not a symmetric boundary face on zx plane There is a symmetric boundary face on zx plane
Type	Flag	1 or Sphere 2 or Cylinder	The type The type is sphere. The type is cylinder.
TopCenter	Double		The distance to the center of the top plane of the cylinder
BottomCenter	Double		the distance to the center of the bottom plane of the cylinder
Division	Flag		The number of the divisions in the z-direction (cylinder)or latitudinal direction (sphere)
XYSymmetricBoundary	Flag	0 or Off 1 or On	The flag of a symmetric boundary face on xy plane There is not a symmetric boundary face on xy plane There is a symmetric boundary face on xy plane

Topology Optimization(TopologyOptimization)

Perform topology optimization.Design region specification and method setting.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
GaussianRadii	Vector		The gaussian radius
CenterOfGaussian	Table		The center of the Gaussian point
UseSymmetry	Flag	0 or Off 1 or On	Flag to use mirror symmetry Do not use mirror symmetry Use mirror symmetry
CoordinateSystem	Coordinate		The coordinate system for symmetry
PeriodicType	Flag	0 or None 1 or Rotation 2 or Translation	Flag to set periodicity Do not set periodicity Set the rotation cycle Set the translation cycle
PeriodicAngle	Double		Setting the cycle angle
PeriodicDistance	Double		Setting the periodic distance
Origin	Vector		The point on axis
FilterType	Flag	0 or NGnet 1 or GaborFilter	Method Use NGnet Use Gabor Filter
WaveLength	Double		Wavelength
Direction	Flag	0 or Upward 1 or Downward	The direction of axis in the 2D model The direction of axis is parallel to (0,0,1). The direction of axis is parallel to (0,0,-1).
Axis2D	Vector		The axis direction
UseContinuousMaterialProperties	Flag	0 or Off 1 or On	Flag to model material properties with continuous variables Use discrete material values Use continous variables for material properties
Axis	Vector		The axis direction

Initial Stress(InitialStress)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
AbaqusStep	String		The step to use in the Abaqus result database
AbaqusUnit	String		The unit of the stress result in the Abaqus result database
AbaqusLengthUnit	String		The unit of the length in the Abaqus result database
PlotFile	String		The path of the reference plot file
PlotFile_DataSourceType	Flag	0 or ResultFile 1 or ProjectFile 2 or CurrentProject 3 or AnalysisGroup	Specified data source type for plot file use result file for data source type. use project file for data source type. use current project for data source type. use analysis group for data source type.
PlotFile_ProjectFile	String		Specified project file for project file type
PlotFile_ProjectFile_StudyId	Flag		Specified study id for project file type
PlotFile_ProjectFile_CaseId	Flag		Specified case id for project file type
PlotFile_CurrentProject_StudyId	Flag		Specified study id for current project type
PlotFile_CurrentProject_CaseId	Flag		Specified case id for current project type
PlotFile_AnalysisGroup_StudyId	Flag		Specified study id for analysis group type
PlotFile_StartRow	Flag		The start row number for reading file
PlotFile_SkipFirstColumn	Flag	0 or Off 1 or On	The flag for not using first column as ID Use first column as ID. Not use first column as ID.
PlotFile_UseAutoSearchDistance	Flag	0 or Off 1 or On	The flag for using automatically decided search distance The search distance is not decided automatically. The search distance is decided automatically.
PlotFile_SearchDistance	Double		The search distance
PlotFile_CoordinateId	Coordinate		The coordinate system for reference.
ExtendDistance	Double		The height of 3D extension.

Contact(Contact)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
ContactType	Flag	1 or FiniteSliding 2 or InfinitesimalSliding	The contact type The finite sliding type The infinitesimal sliding type
FrictionCoefficient	Double		The friction coefficient
ConsiderAdhesion	Flag	0 or Off 1 or On	Flag to control use of adhesive force Do not consider adhesion. The consider adhesion.
LayerYoungsModulus	Double		The Young's modules of the adhesive layer
CalcTypeOfAdhesionLayer	Flag	0 or Automatic 1 or Specified	Calc type of adhesion layer Automatically calculate the adhesive layer thickness. Specify the adhesive layer thickness.
ThickOfAdhesionLayer	Double		The thick of adhesion laye
UseFriction	Flag	0 or Off 1 or On	The flag to use friction. Frictionless. Friction.
UserDefinedPenalty	Flag	0 or Off 1 or On	The flag for user-defined penalty factor. Don't apply user-defined penalty factor. Apply user-defined penalty factor.
PenaltyFactor	Double		The penalty factor.
UseContactInterference	Flag	0 or Off 1 or On	The flag to use interference parameter. The interference parameter is not used. The interference parameter is used.
ContactInterference	Double		The contact interference.

Displacement(Displacement)

Specifies the displacement for a specified area.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Type	Flag	0 or Normal 1 or Specified	The type of displacement The displacement is normal to the face The displacement is specified by the Direction vector
Direction	Vector		The direction for the displacement
Displacement	Double		The displacement
Phase	Double		The displacement phase

Constraint(Constraint)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Type	Flag	0 or All 1 or Normal 2 or Tangent	The constraint type The constraint to the entire directions The constraint direction is normal to the face or edges The constraint direction is tangential tothe boudary of the face or edges

Rotation Periodic Boundary(RotationPeriodicBoundary)

Specifies a periodic boundary for a partial model when the model has periodicity in the direction of rotation.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
BoundaryType	Flag	1 or Rotation 3 or Axial	The periodic type The periodic boundary The axial reverse periodic boundary
Angle	Double		The periodic angle
Axis	Vector		The rotation axis
Origin	Vector		The rotation center point

Concentrated Load(ConcentratedLoad)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Type	Flag	0 or Constant 1 or PointArray	The load type The type is constant The type is point array
Load	Double		The load value
Phase	Double		The phase
FlagCyclic	Flag		The flag cyclic
LoadTable	Table		The amplitude and phase versus frequency table
Direction	Vector		The direction of the load

Volume Load(VolumeLoad)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Load	Double		The load value
Phase	Double		The phase
FlagCyclic	Flag		The flag cyclic
Direction	Vector		The direction of the load
LoadTable	Table		The amplitude versus time table
Type	Flag	0 or Constant 1 or PointArray	The load type The type is constant The type is point array

Electric Potential Boundary(Electrode)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Amplitude	Double		The amplitude value.
Phase	Double		The phase value.

Spring(Spring)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SpringConstant	Double		The spring constant

Adhesion(Adhesion)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
SpringConstant	Double		The spring constant

Topology Optimization (Sensitivity Analysis)(SensitivityAnalysis)

Perform topology optimization based on sensitivity analysis.Set the initial density.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
InitialDensity	Double		The initial density
PenaltyParameter	Flag		The penalty parameter.
UseSymmetry	Flag	0 or Off 1 or On	Flag to use mirror symmetry Do not use mirror symmetry Use mirror symmetry
CoordinateSystem	Coordinate		The coordinate system for symmetry

Concentrated Mass(ConcentratedMass)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Mass	Double		The mass value

PressFit(PressFit)

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Clearance	Double		The interference value