Properties for Part Feature

Script property names and flags to be used in the part feature.

Coil Template(CoilTemplate)

These properties to be used in the CoilTemplate class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Merge	bool		Merge with Existing Solid
UseGeomSettingStartAxis	bool		Set From Geometry
ReverseStartAxis	bool		Reverse
StartAxisX	Double		X
StartAxisY	Double		Y
StartAxisZ	Double		Z
UseGeomSettingRotationAxis	bool		Set From Geometry
ReverseRotationAxis	bool		Reverse
RotationX	Double		X
RotationY	Double		Y
RotationZ	Double		Z
UseGeomSettingOrigin	bool		Set From Geometry
OriginX	Double		X
OriginY	Double		Y
OriginZ	Double		Z
CoilType	Flag	0 or Radial 1 or Axial	Geometry Radial Axial
CoilCode	Flag	1001 or Concentric 1002 or Spiral 1003 or Rectangular 1004 or TableRectangular	Coil End Type Concentric Type Spiral Type Rectangular Type Rectangular Type(By Specifying a Table)
CoilCodeAxial	Flag	2001 or AxialConcentric 2002 or AxialRectangular	Coil End Type Arc Type Flap Type
ProfileType	Flag	0 or Circle 1 or Square 2 or SelectSketch 4 or Vertex	Profile Type Circle Square Select Sketch Vertex
SquareWidth	Double		Profile Width
SquareLength	Double		Profile Height
SquareFilletRadius	Double		Fillet Radius
SquareFillet	bool		Fillet
SquareFilletRadius	Double		Fillet Radius
CircleDiameter	Double		Profile Diameter
Sketch	String		Sketch
UseBendMiter	bool		Use Bend Miter
BendRadius	Double		Max Bend Radius
ShowConstructionPreview	bool		Show Construction Preview
CheckConflict	bool		Check Conflict Between Coils
CheckFaceFaceIntersection	bool		Check Intersect of Adjacent Faces
UseManualUpdatePreview	bool		Use Manual Update Preview
ManualUpdatePreview	bool		Update Preview
Concentric:WindingType	Flag	0 1	Winding Type Auto (Type 1) Auto (Type 2)
Concentric:Slots	Flag		Slots
Concentric:Poles	Flag		Poles
Concentric:Phase	Flag		Phase
Concentric:Layers	Flag		Layers
Concentric:Pitch	Flag		Pitch
Concentric:InnerDiameter	Double		Inner Diameter
Concentric:OuterDiameter	Double		Outer Diameter
Concentric:StartAngle	Double		Start Angle
Concentric:BiasAngle	Double		Bias Angle
Concentric:Thickness	Double		Pull-up Height
Concentric:FullModelCopy	bool		Full Model Copy
Concentric:UseRadialFold	bool		Fold Radial Direction
Concentric:FoldRadialLength	Double		Radial Length
Concentric:FoldAxialLength	Double		Axial Length
Concentric:UseLoftToFillet	bool		Eliminate Twist With Loft
Concentric:UseDense	bool		Specify Dense Filling Area
Concentric:DenseInnerDiameter	Double		Inner Diameter
Concentric:DenseOuterDiameter	Double		Outer Diameter
Concentric:DenseTopHeight	Double		Top Height
Concentric:DenseBottomHeight	Double		Bottom Height
Concentric:DenseFilletRadiusAtRadial	Double		Fillet Radius/(Radial)
Concentric:DenseFilletRadiusAtCircumferential	Double		Fillet Radius/(Theta)
Concentric:UseFilletOuterPeriphery	bool		Fillet Outer Periphery
Concentric:UseConnectSolid	bool		Connect Smoothly with Existing Solid
Concentric:ConnectLoftLength	Double		Loft Length
Concentric:UsePeriodicAngle	bool		Specify Periodic Angle
Concentric:PeriodicAngle	Double		Periodic Angle
Concentric:PeriodicStartAngle	Double		Start Angle
Spiral:WindingType	Flag	0 1	Winding Type Auto (Type 1) Auto (Type 2)
Spiral:Slots	Flag		Slots
Spiral:Poles	Flag		Poles
Spiral:Phase	Flag		Phase
Spiral:Layers	Flag		Layers
Spiral:Pitch	Flag		Pitch
Spiral:InnerDiameter	Double		Inner Diameter
Spiral:OuterDiameter	Double		Outer Diameter
Spiral:StartAngle	Double		Start Angle
Spiral:BiasAngle	Double		Bias Angle
Spiral:Thickness	Double		Pull-up Height
Spiral:WindingDirectionType	Flag	0 1	Winding Direction Counterclockwise From Inside Counterclockwise From Outside
Spiral:FullModelCopy	bool		Full Model Copy
Spiral:UseRadialFold	bool		Fold Radial Direction
Spiral:FoldRadialLength	Double		Radial Length
Spiral:FoldAxialLength	Double		Axial Length
Spiral:UseLoftToFixTwist	bool		Eliminate Twist In Slot With Loft
Spiral:UseDense	bool		Specify Dense Filling Area
Spiral:DenseInnerDiameter	Double		Inner Diameter
Spiral:DenseOuterDiameter	Double		Outer Diameter
Spiral:DenseTopHeight	Double		Top Height
Spiral:DenseBottomHeight	Double		Bottom Height
Spiral:DenseOffsetDiameter	Double		Offset Diameter
Spiral:DenseFilletRadiusAtRadial	Double		Fillet Radius/(Radial)
Spiral:DenseFilletRadiusAtCircumferential	Double		Fillet Radius/(Theta)
Spiral:UseConnectSolid	bool		Connect Smoothly with Existing Solid
Spiral:ConnectLoftLength	Double		Loft Length
Spiral:UsePeriodicAngle	bool		Specify Periodic Angle
Spiral:PeriodicAngle	Double		Periodic Angle
Spiral:PeriodicStartAngle	Double		Start Angle
Rectangular:WindingType	Flag	0 1	Winding Type Auto (Type 1) Auto (Type 2)
Rectangular:Slots	Flag		Slots
Rectangular:Poles	Flag		Poles
Rectangular:Phase	Flag		Phase
Rectangular:Layers	Flag		Layers
Rectangular:Pitch	Flag		Pitch
Rectangular:InnerDiameter	Double		Inner Diameter
Rectangular:OuterDiameter	Double		Outer Diameter
Rectangular:StartAngle	Double		Start Angle
Rectangular:Thickness	Double		Pull-up Height
Rectangular:CoilEndHeight	Double		Coil End Height
Rectangular:BridgeHeight	Double		Folded Height
Rectangular:SkewTaperAngle	Double		Bending Angle
Rectangular:TiltFolded	bool		Use Bending Angle To Folded
Rectangular:WindingDirectionType	Flag	0 1	Winding Direction Counterclockwise From Inside Counterclockwise From Outside
Rectangular:UseDetailSetting	bool		Specify Detail
Rectangular:InnerThickness	Double		Pull-up Height(Inner)
Rectangular:OuterThickness	Double		Pull-up Height(Outer)
Rectangular:InnerBridgeHeight	Double		Folded Height(Inner)
Rectangular:OuterBridgeHeight	Double		Folded Height(Outer)
Rectangular:FullModelCopy	bool		Full Model Copy
Rectangular:UseLoftToFillet	bool		Eliminate Twist With Loft
Rectangular:UseFoldedSolid	bool		Use Folded Solid
Rectangular:FoldedSolidWidth	Double		Width
Rectangular:FoldedSolidHeight	Double		Height
Rectangular:UseFoldedLoft	bool		Specify Folded Bend Type
Rectangular:FoldedBendType	Flag	0 1	Bend Type Fillet Loft
Rectangular:SpecifyFoldedAngle	bool		Specify Folded Angle
Rectangular:FoldedAngle	Double		Folded Angle
Rectangular:FoldedBendRadius	Double		Max Fillet Radius
Rectangular:UseConnectSolid	bool		Connect Smoothly with Existing Solid
Rectangular:ConnectLoftLength	Double		Loft Length
Rectangular:UsePeriodicAngle	bool		Specify Periodic Angle
Rectangular:PeriodicAngle	Double		Periodic Angle
Rectangular:PeriodicStartAngle	Double		Start Angle
TableRectangular:Slots	Flag		Slots
TableRectangular:Layers	Flag		Layers
TableRectangular:WindingTableTitleVector	stringlist
TableRectangular:WindingGroupIndexVector	Flag
TableRectangular:MakeCopy	bool		Make Copy
TableRectangular:NumOffsetSlots	Flag		Number of Offset Slots
TableRectangular:Instance	Flag		Instance
TableRectangular:InnerDiameter	Double		Inner Diameter
TableRectangular:OuterDiameter	Double		Outer Diameter
TableRectangular:StartAngle	Double		Start Angle
TableRectangular:Thickness	Double		Pull-up Height
TableRectangular:TopCoilEndHeight	Double		Coil End Height
TableRectangular:TopHeigthtEachCoilEnd	bool		Detail Setting of Coil End Height
TableRectangular:TopInnerCoilEndHeight	Double		Inner Coil End Height
TableRectangular:TopOuterCoilEndHeight	Double		Outer Coil End Height
TableRectangular:TopBridgeHeight	Double		Folded Height
TableRectangular:TopSkewTaperAngle	Double		Bending Angle
TableRectangular:TopAngleEachLayers	bool		Detail Setting of Bending Angle
TableRectangular:TopInnerTaperAngle	Double		Inner Bending Angle
TableRectangular:TopOuterTaperAngle	Double		Outer Bending Angle
TableRectangular:TopTiltFolded	bool		Use Bending Angle To Folded
TableRectangular:TopSpecifyFoldedAngle	bool		Specify Folded Angle
TableRectangular:TopFoldedAngle	Double		Folded Angle
TableRectangular:TopUseFoldedSolid	bool		Use Folded Solid
TableRectangular:TopFoldedSolidWidth	Double		Width
TableRectangular:TopFoldedSolidHeight	Double		Height
TableRectangular:TopSpecifySpiralOuterDiameter	bool		Offset Start Position of Start-up
TableRectangular:TopSpiralOuterDiameter	Double		Offset Diameter from Outer Diameter
TableRectangular:TopInvertFoldedSameLayer	bool		Invert Folded of Same Layer
TableRectangular:BottomCoilEndHeight	Double		Coil End Height
TableRectangular:BottomHeigthtEachCoilEnd	bool		Detail Setting of Coil End Height
TableRectangular:BottomInnerCoilEndHeight	Double		Inner Coil End Height
TableRectangular:BottomOuterCoilEndHeight	Double		Outer Coil End Height
TableRectangular:BottomBridgeHeight	Double		Folded Height
TableRectangular:BottomInflowHeight	Double		Inflow or Outflow Surfaces Height
TableRectangular:BottomSkewTaperAngle	Double		Bending Angle
TableRectangular:BottomAngleEachLayers	bool		Detail Setting of Bending Angle
TableRectangular:BottomInnerTaperAngle	Double		Inner Bending Angle
TableRectangular:BottomOuterTaperAngle	Double		Outer Bending Angle
TableRectangular:BottomTiltFolded	bool		Use Bending Angle To Folded
TableRectangular:BottomSpecifyFoldedAngle	bool		Specify Folded Angle
TableRectangular:BottomFoldedAngle	Double		Folded Angle
TableRectangular:BottomUseFoldedSolid	bool		Use Folded Solid
TableRectangular:BottomFoldedSolidWidth	Double		Width
TableRectangular:BottomFoldedSolidHeight	Double		Height
TableRectangular:BottomSpecifySpiralOuterDiameter	bool		Offset Start Position of Start-up
TableRectangular:BottomSpiralOuterDiameter	Double		Offset Diameter from Outer Diameter
TableRectangular:UsePeriodicAngle	bool		Specify Periodic Angle
TableRectangular:PeriodicAngle	Double		Periodic Angle
TableRectangular:PeriodicStartAngle	Double		Start Angle
TableRectangular:AxisDirectionHalf	bool		Axis Direction Half
TableRectangular:UseSettingColor	bool		Specify Color
AxialConcentric:WindingType	Flag	0 1	Winding Type Auto (Type 1) Auto (Type 2)
AxialConcentric:Slots	Flag		Slots
AxialConcentric:Poles	Flag		Poles
AxialConcentric:Phase	Flag		Phase
AxialConcentric:Layers	Flag		Layers
AxialConcentric:Pitch	Flag		Pitch
AxialConcentric:InnerDiameter	Double		Inner Diameter
AxialConcentric:OuterDiameter	Double		Outer Diameter
AxialConcentric:CoilWidth	Double		Width
AxialConcentric:StartAngle	Double		Start Angle
AxialConcentric:Gap	Double		Gap
AxialConcentric:SlotCenterDistance	Double		Slot Center Distance
AxialConcentric:CircumferentialFullModelCopy	bool		Circumferential Full Model Copy
AxialConcentric:AxialFullModelCopy	bool		Axial Full Model Copy
AxialConcentric:UsePeriodicAngle	bool		Specify Periodic Angle
AxialConcentric:PeriodicAngle	Double		Periodic Angle
AxialConcentric:PeriodicStartAngle	Double		Start Angle
AxialRectangular:WindingType	Flag	0 1	Winding Type Auto (Type 1) Auto (Type 2)
AxialRectangular:Slots	Flag		Slots
AxialRectangular:Poles	Flag		Poles
AxialRectangular:Phase	Flag		Phase
AxialRectangular:Layers	Flag		Layers
AxialRectangular:Pitch	Flag		Pitch
AxialRectangular:InnerDiameter	Double		Inner Diameter
AxialRectangular:OuterDiameter	Double		Outer Diameter
AxialRectangular:CoilWidth	Double		Width
AxialRectangular:StartAngle	Double		Start Angle
AxialRectangular:Gap	Double		Gap
AxialRectangular:InvertFoldingDirection	bool		Invert Folding Direction
AxialRectangular:CircumferentialFullModelCopy	bool		Circumferential Full Model Copy
AxialRectangular:AxialFullModelCopy	bool		Axial Full Model Copy
AxialRectangular:InnerCoilEndLength	Double		Coil End Length
AxialRectangular:InnerFlapLength	Double		Flap Length
AxialRectangular:OuterCoilEndLength	Double		Coil End Length
AxialRectangular:OuterFlapLength	Double		Flap Length
AxialRectangular:UsePeriodicAngle	bool		Specify Periodic Angle
AxialRectangular:PeriodicAngle	Double		Periodic Angle
AxialRectangular:PeriodicStartAngle	Double		Start Angle

Composite Path(CompositePath)

These properties to be used in the CompositePath class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
ToBeam	bool		To Beam
Suppress	bool		Suppress feature
Visible	bool		visible
PathList	stringlist		path list
RemoveSelectedPath	bool		Remove Selected Path
EdgeList	stringlist		edge list
RemoveEdgeOwnerGeometry	bool		Remove Edge Owner Geometry
SketchList	stringlist		sketch list

Extrude Cut(ExtrudeCut)

These properties to be used in the ExtrudeCut class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseSkew	bool		Skew / Use skew flag
SkewAxisType	Flag	0 or SelectVertex 1 or SetCoordinate	Skew / Skew axis type Select Vertex Set Coordinate
SkewAngle	Double		Skew / Skew angle
XOnSkewAxis	Double		Skew / X on skew axis
YOnSkewAxis	Double		Skew / Y on skew axis
ZOnSkewAxis	Double		Skew / Z on skew axis
VertexIdOnSkewAxis	String		Skew / Vertex id on skew axis
Reverse	bool		Reverse direction
Type	Flag	0 or OneSide 1 or BothSides	Type One side extrude Both sides extrude
Height	Double		Extrude cut height

Extrude Imprint(ExtrudeImprint)

These properties to be used in the ExtrudeImprint class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Reverse	bool		Reverse direction
Type	Flag	0 or OneSide 1 or BothSides	Type One side extrude Both sides extrude
Height	Double		Extrude height

Extrude(ExtrudeSolid)

These properties to be used in the ExtrudeSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseSkew	bool		Skew / Use skew flag
SkewAxisType	Flag	0 or SelectVertex 1 or SetCoordinate	Skew / Skew axis type Select Vertex Set Coordinate
SkewAngle	Double		Skew / Skew angle
XOnSkewAxis	Double		Skew / X on skew axis
YOnSkewAxis	Double		Skew / Y on skew axis
ZOnSkewAxis	Double		Skew / Z on skew axis
VertexIdOnSkewAxis	String		Skew / Vertex id on skew axis
Divisions	Flag		Mesh / Number of mesh divisions
RatioType	Flag	0 or Progression 1 or SpecifiedRatio	Mesh / Ratio type of mesh divisions Progression Specified ratio
Ratio	Double		Mesh / Ratio of mesh divisions
ReverseRatio	bool		Mesh / Reverse ratio of mesh divisions
SpecifiedRatio	Double		Mesh / Specified ratio of mesh divisions
Merge	bool		Solid merge option
MergeSameSurface	bool		Same surface merge option
Reverse	bool		Reverse direction
Type	Flag	0 or OneSide 1 or BothSides	Type One side extrude Both sides extrude
Height	Double		Extrude height

Extrude Split(ExtrudeSplit)

These properties to be used in the ExtrudeSplit class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Reverse	bool		Reverse direction
Type	Flag	0 or OneSide 1 or BothSides	Type One side extrude Both sides extrude
Height	Double		Extrude split height

Extrude Surface(ExtrudeSurface)

These properties to be used in the ExtrudeSurface class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseSkew	bool		Skew / Use skew flag
SkewAxisType	Flag	0 or SelectVertex 1 or SetCoordinate	Skew / Skew axis type Select Vertex Set Coordinate
SkewAngle	Double		Skew / Skew angle
XOnSkewAxis	Double		Skew / X on skew axis
YOnSkewAxis	Double		Skew / Y on skew axis
ZOnSkewAxis	Double		Skew / Z on skew axis
VertexIdOnSkewAxis	String		Skew / Vertex id on skew axis
Merge	bool		Solid merge option
Reverse	bool		Reverse direction
Type	Flag	0 or OneSide 1 or BothSides	Type One side extrude Both sides extrude
Height	Double		Extrude surface height

Face Extrude(FaceExtrudeSolid)

These properties to be used in the FaceExtrudeSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseSkew	bool		Skew / Use skew flag
SkewAxisType	Flag	0 or SelectVertex 1 or SetCoordinate	Skew / Skew axis type Select Vertex Set Coordinate
SkewAngle	Double		Skew / Skew angle
XOnSkewAxis	Double		Skew / X on skew axis
YOnSkewAxis	Double		Skew / Y on skew axis
ZOnSkewAxis	Double		Skew / Z on skew axis
VertexIdOnSkewAxis	String		Skew / Vertex id on skew axis
Divisions	Flag		Mesh / Number of mesh divisions
RatioType	Flag	0 or Progression 1 or SpecifiedRatio	Mesh / Ratio type of mesh divisions Progression Specified ratio
Ratio	Double		Mesh / Ratio of mesh divisions
ReverseRatio	bool		Mesh / Reverse ratio of mesh divisions
SpecifiedRatio	Double		Mesh / Specified ratio of mesh divisions
Merge	bool		Solid merge option
MergeSameSurface	bool		Same surface merge option
Reverse	bool		Reverse direction
DirectionId	String		Direction / Direction id of extrude
DirectionType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Direction / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
DirectionVecX	Double		Direction / Specify Vector / X
DirectionVecY	Double		Direction / Specify Vector / Y
DirectionVecZ	Double		Direction / Specify Vector / Z
FaceList	stringlist		List of face
Height	Double		Extrude height

Face Revolve(FaceRevolveSolid)

These properties to be used in the FaceRevolveSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseHelical	bool		Helical / Use helical flag
HelicalType	Flag	0 or HelicalByPitch 1 or HelicalByHeight	Helical / Helical type Helical by pitch Helical by height
HelicalPitch	Double		Helical / Helical pitch
HelicalHeight	Double		Helical / Helical height
ReverseHelical	bool		Helical / Helical is reversed
Divisions	Flag		Mesh / Number of mesh divisions
RatioType	Flag	0 or Progression 1 or SpecifiedRatio	Mesh / Ratio type of mesh divisions Progression Specified ratio
Ratio	Double		Mesh / Ratio of mesh divisions
ReverseRatio	bool		Mesh / Reverse ratio of mesh divisions
SpecifiedRatio	Double		Mesh / Specified ratio of mesh divisions
Merge	bool		Solid merge option
MergeSameSurface	bool		Same surface merge option
Reverse	bool		Reverse direction
AxisId	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
FaceList	stringlist		List of face
Angle	Double		Revolve solid angle

Face Sweep Solid(FaceSweepSolid)

These properties to be used in the FaceSweepSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Merge	bool		merge
MergeSameSurface	bool		Same surface merge option
FaceList	stringlist		List of face
PathId	String		path id
UseFillet	bool		Use Fillet
FilletRadius	Double		Fillet Radius
UseTwist	bool		Use Twist
TwistAngleType	Flag		Twist Angle Type
TwistAngle	Double		twist angle
TwistPitch	Double		Twist Pitch
TwistNumberOfTurns	Double		Twist Number Of Turns

Helix Path(HelixPath)

These properties to be used in the HelixPath class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
ToBeam	bool		To Beam
Suppress	bool		Suppress feature
Visible	bool		visible
Axis	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
Reverse	bool		Reverse
Start	String		Start / Start Position
StartType	Flag	0 or SelectEntity 1 or SpecifyPosition 2 or DefaultOrigin	Start / Coil End Type Select Entity Specify Position Default Origin
StartPosX	Double		Start / X
StartPosY	Double		Start / Y
StartPosZ	Double		Start / Z
RadiusOffset	Double		R offset
ThetaOffset	Double		θ offset
HeightOffSet	Double		height offSet
PitchType	Flag	0 or PitchAndNumberOfTurns 1 or HeightAndNumberOfTurns 2 or PitchAndHeight 3 or PitchAndRotationAngle 4 or HeightAndRotationAngle	pitch type pitch and number of turns height and number of turns pitch and height pitch and rotation angle height and rotation angle
Pitch	Double		pitch
Height	Double		height
NumberOfTurns	Double		number of turns
RotationAngle	Double		rotation angle
ReverseHelical	bool		Helical is reversed
UseTaper	bool		use taper
TaperAngle	Double		taper angle

Import(ImportFeature)

These properties to be used in the ImportFeature class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Color	Color		color
UseParentColor	bool		Use parent color

Loft(LoftSolid)

These properties to be used in the LoftSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Merge	bool		Solid Merge Option
LoftType	Flag	0 or FaceToFace 1 or MultiSections	Type Face To Face Multi Sections
StartFaceId	String		Start Face Id
EndFaceId	String		End Face Id
UseTakeOff	bool		Use Take Off
StartTakeOffFactor	Double		Start Take Off
EndTakeOffFactor	Double		End Take Off
SectionIdList	stringlist		List of Section
ConnectStartAndEnd	bool		Connect Start and End
UseSelfIntersection	bool		Check Self Intersection

Make Beam(MakeBeam)

These properties to be used in the MakeBeam class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress

Mesh Block(OrphanPlanarMeshFeature)

These properties to be used in the OrphanPlanarMeshFeature class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Visible	bool		visible
Color	Color		color
UseParentColor	bool		Use parent color

Mesh Block(OrphanVolumeMeshFeature)

These properties to be used in the OrphanVolumeMeshFeature class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Visible	bool		visible
Color	Color		color
UseParentColor	bool		Use parent color

Boolean(PartBoolean)

These properties to be used in the PartBoolean class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
OverlappedAreaError	bool		overlapped area error
BooleanType	Flag	0 or Union 1 or Subtraction 2 or Intersection	boolean type by union by subtraction by intersection
Solid1	stringlist		solid1
Solid2	stringlist		solid2
MergeSolid1	bool		merge solid1
DeleteSolid1	bool		delete solid1
DeleteSolid2	bool		delete solid2

Imprint(Imprint)

These properties to be used in the Imprint class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Solid	stringlist		Solid
UseDefaultTol	bool		Use default tolerance
Tolerance	Double		Tolerance

Delete Duplicate Nodes(PartMergeNode)

These properties to be used in the PartMergeNode class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Target	stringlist		Target list
AllEditTargets	bool		all edit targets
UseDefaultTol	bool		use default tolerance
Tolerance	Double		tolerance
IsOnlyBoundaryNodes	bool		apply only on mesh boundary nodes
ShowDuplicateNodes	bool		show duplicate nodes

Solid Scale(PartScale)

These properties to be used in the PartScale class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Target	stringlist		Target list
Center	String		Center / Center of Scale
CenterType	Flag	0 or SelectEntity 1 or SpecifyPosition 2 or DefaultOrigin	Center / Coil End Type Select Entity Specify Position Default Origin
CenterPosX	Double		Center / X
CenterPosY	Double		Center / Y
CenterPosZ	Double		Center / Z
AxisId	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
ScaleType	Flag	0 or UniformScale 1 or XYZScale 2 or RScale	Coil End Type Uniform Scale XYZ Scale R Scale
Factor	Double		Factor
XFactor	Double		X Factor
YFactor	Double		Y Factor
AllEditTargets	bool		All Edit Targets
ZFactor	Double		Z Factor

Points Path(PointsPath)

These properties to be used in the PointsPath class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
ToBeam	bool		To Beam
Suppress	bool		Suppress feature
Visible	bool		visible
PointXVector	Double		Point X Vector
PointYVector	Double		Point Y Vector
PointZVector	Double		Point Z Vector
PointsList	Table		Points List
SmoothConnect	bool		Smooth Connect
ConnectStartAndEnd	bool		Connect Start And End

Reference Line(ReferenceLine)

These properties to be used in the ReferenceLine class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Visible	bool		visible
VertexList	stringlist		List of veretx
X	Double		X offset
Y	Double		Y offset
Z	Double		Z offset
Type	Flag	0 or LineOffset 1 or %2Points 2 or %2Planes 3 or %2Lines 4 or PlaneVertex 5 or LineVertex 6 or Circle	Type By Line With Offset 2points 2planes By 2lines By Plane and Vertex By Line and Vertex By Circle
LineId	String		Line id
PlaneList	stringlist		2planes
LineList	stringlist		By 2lines
PlaneVertexList	stringlist		list of plane and vertex
LineVertexList	stringlist		List of line and vertex
CircleId	String		circle id

Reference Plane(ReferencePlane)

These properties to be used in the ReferencePlane class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Visible	bool		visible
Vector1Id	String		Frist Vector / Vector1
Vector1Type	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Frist Vector / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
Vector1VecX	Double		Frist Vector / Specify Vector / X
Vector1VecY	Double		Frist Vector / Specify Vector / Y
Vector1VecZ	Double		Frist Vector / Specify Vector / Z
Vector2Id	String		Second Vector / Vector2
Vector2Type	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Second Vector / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
Vector2VecX	Double		Second Vector / Specify Vector / X
Vector2VecY	Double		Second Vector / Specify Vector / Y
Vector2VecZ	Double		Second Vector / Specify Vector / Z
Center	String		Origin / Origin of reference plane
CenterType	Flag	0 or SelectEntity 1 or SpecifyPosition 2 or DefaultOrigin	Origin / Coil End Type Select Entity Specify Position Default Origin
CenterPosX	Double		Origin / X
CenterPosY	Double		Origin / Y
CenterPosZ	Double		Origin / Z
Type	Flag	0 or LineVertex 1 or %3Vertex 2 or Distance 3 or Angle 4 or PlaneVertex 5 or %2Plane 6 or VectorAndOrigin	Type Line and Vertex 3vertex Distance Angle by Plane and Vertex by 2 Planes by vector and origin
LineVertexList	stringlist		List of line and vertex
VertexList	stringlist		List of vertex
Plane	String		Plane
Distance	Double		Distance
DistanceReverse	bool		Reverse flag of distance type
Angle	Double		Angle
AngleReverse	bool		Reverse flag of angle type
AngleList	stringlist		List of anlge type
PlaneVertexList	stringlist		list of plane and vertex
Plane1Id	String		plane 1
Plane2Id	String		plane 2
Plane1Reverse	bool		reverse flag of plane 1
Plane2Reverse	bool		reverse flag of plane 2
Vector1Reverse	bool		reverse of first vector
Vector2Reverse	bool		reverse of second vector
FirstVectorDirection	Flag	0 or X 1 or Y 2 or Z	first vector direction X Y Z
FirstVectorRotationAngle	Double		first vector rotation angle

Reference Point(ReferencePoint)

These properties to be used in the ReferencePoint class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Visible	bool		visible
X	Double		Point x value
Y	Double		Point y value
Z	Double		Point z value
Type	Flag	0 or Point 1 or VertexOffset 2 or PlaneLine 3 or %2Lines	Type Point Vertex with offset by plane and line by 2 lines
XOffset	Double		X offset
YOffset	Double		Y offsetｙ
ZOffset	Double		Z offset
VertexId	String		Vertex id
PlaneLineList	stringlist		list of plane and line
LineList	stringlist		list of line

Revolve Cut(RevolveCut)

These properties to be used in the RevolveCut class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseHelical	bool		Helical / Use helical flag
HelicalType	Flag	0 or HelicalByPitch 1 or HelicalByHeight	Helical / Helical type Helical by pitch Helical by height
HelicalPitch	Double		Helical / Helical pitch
HelicalHeight	Double		Helical / Helical height
ReverseHelical	bool		Helical / Helical is reversed
Reverse	bool		Reverse direction
AxisId	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
Type	Flag	0 or OneSide 1 or BothSides	Type One side revolve Both sides revolve
Angle	Double		Revolve solid angle

Revolve(RevolveSolid)

These properties to be used in the RevolveSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseHelical	bool		Helical / Use helical flag
HelicalType	Flag	0 or HelicalByPitch 1 or HelicalByHeight	Helical / Helical type Helical by pitch Helical by height
HelicalPitch	Double		Helical / Helical pitch
HelicalHeight	Double		Helical / Helical height
ReverseHelical	bool		Helical / Helical is reversed
Divisions	Flag		Mesh / Number of mesh divisions
RatioType	Flag	0 or Progression 1 or SpecifiedRatio	Mesh / Ratio type of mesh divisions Progression Specified ratio
Ratio	Double		Mesh / Ratio of mesh divisions
ReverseRatio	bool		Mesh / Reverse ratio of mesh divisions
SpecifiedRatio	Double		Mesh / Specified ratio of mesh divisions
Merge	bool		Solid merge option
MergeSameSurface	bool		Same surface merge option
Reverse	bool		Reverse direction
AxisId	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
Type	Flag	0 or OneSide 1 or BothSides	Type One side revolve Both sides revolve
Angle	Double		Revolve solid angle

Revolve Split(RevolveSplit)

These properties to be used in the RevolveSplit class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Reverse	bool		Reverse direction
AxisId	String		Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis Vector / X
AxisVecY	Double		Axis Vector / Y
AxisVecZ	Double		Axis Vector / Z
AxisPosX	Double		Axis Center / X
AxisPosY	Double		Axis Center / Y
AxisPosZ	Double		Axis Center / Z
Type	Flag	0 or OneSide 1 or BothSides	Type One side revolve Both sides revolve
Angle	Double		Revolve solid angle

Revolve Surface(RevolveSurface)

These properties to be used in the RevolveSurface class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
UseHelical	bool		Helical / Use helical flag
HelicalType	Flag	0 or HelicalByPitch 1 or HelicalByHeight	Helical / Helical type Helical by pitch Helical by height
HelicalPitch	Double		Helical / Helical pitch
HelicalHeight	Double		Helical / Helical height
ReverseHelical	bool		Helical / Helical is reversed
Merge	bool		Solid merge option
Reverse	bool		Reverse direction
AxisId	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
Type	Flag	0 or OneSide 1 or BothSides	Type One side revolve Both sides revolve
Angle	Double		Revolve solid angle

Solid Face Move(SolidFaceMove)

These properties to be used in the SolidFaceMove class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Target	stringlist		Target list
Direction	String		Move Direction / Move direction
DirectionType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ 5 or SpecifyMove	Move Direction / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis Specify Move
DirectionVecX	Double		Move Direction / Specify Vector / X
DirectionVecY	Double		Move Direction / Specify Vector / Y
DirectionVecZ	Double		Move Direction / Specify Vector / Z
DirectionMoveX	Double		Move Direction / Specify Move / X
DirectionMoveY	Double		Move Direction / Specify Move / Y
DirectionMoveZ	Double		Move Direction / Specify Move / Z
AxisRotate	String		Rotation Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Rotation Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Rotation Axis / Axis Vector / X
AxisVecY	Double		Rotation Axis / Axis Vector / Y
AxisVecZ	Double		Rotation Axis / Axis Vector / Z
AxisPosX	Double		Rotation Axis / Axis Center / X
AxisPosY	Double		Rotation Axis / Axis Center / Y
AxisPosZ	Double		Rotation Axis / Axis Center / Z
MoveType	Flag	0 or Parallel 1 or Rotation 2 or Constraint	Move type Parallel move Rotation move Move by positional relations
MethodType	Flag	0 or SpecifyMove 1 or SelectReference	Method type Specify move Select reference
Reference	String		Reference geometry
Measurement	String		Measurement geometry
Distance	Double		Distance
DistanceReverse	bool		Distance / Reverse
Angel	Double		Angle
AngleReverse	bool		Angle / Reverse
ConstraintList	groupvector		Positional relations

Solid Face Offset(SolidFaceOffset)

These properties to be used in the SolidFaceOffset class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Target	stringlist		Target list
MethodType	Flag	0 or SpecifyOffset 1 or SelectReference	Method type Specify offset Select reference
Reference	String		Reference geometry
Offset	Double		Offset
OffsetReverse	bool		Reverse
Measurement	String		Measurement face
Align	bool		Align the Offset Direction

Solid Linear Pattern(SolidLinearPattern)

These properties to be used in the SolidLinearPattern class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Merge	bool		merge
Direction1	String		Direction1 / Edge Id of Direction1
Direction1Type	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Direction1 / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
Direction1VecX	Double		Direction1 / Specify Vector / X
Direction1VecY	Double		Direction1 / Specify Vector / Y
Direction1VecZ	Double		Direction1 / Specify Vector / Z
Direction2	String		Direction2 / Edge Id of Direction2
Direction2Type	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Direction2 / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
Direction2VecX	Double		Direction2 / Specify Vector / X
Direction2VecY	Double		Direction2 / Specify Vector / Y
Direction2VecZ	Double		Direction2 / Specify Vector / Z
Solid	stringlist		Ｓｏｌｉｄ
Feature	stringlist		feature
OverlappedAreaError	bool		overlapped area error
Spacing1	Double		Direction1 / spacing of direction1
Spacing2	Double		Direction2 / spacing of direction2
Instance1	Flag		Direction1 / instance of direction1
Instance2	Flag		Direction2 / instance of direction2
Reverse1	bool		Direction1 / reverse of direction1
Reverse2	bool		Direction2 / reverse of direction2

Solid Mirror Copy(SolidMirrorCopy)

These properties to be used in the SolidMirrorCopy class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Merge	bool		merge
Symmetry	String		Symmetry
SymmetryType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultXY 3 or DefaultYZ 4 or DefaultZX	Coil End Type Select Entity Specify Vector Default XY Plane Default YZ Plane Default ZX Plane
SymmetryVecX	Double		Normal Direction of Plane / X
SymmetryVecY	Double		Normal Direction of Plane / Y
SymmetryVecZ	Double		Normal Direction of Plane / Z
SymmetryPosX	Double		Position on Plane / X
SymmetryPosY	Double		Position on Plane / Y
SymmetryPosZ	Double		Position on Plane / Z
Solid	stringlist		Solid
Feature	stringlist		feature
OverlappedAreaError	bool		overlapped area error

Solid Move(SolidMove)

These properties to be used in the SolidMove class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
SolidList	stringlist		list of solid
Direction	String		Move Direction / Move direction
DirectionType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ 5 or SpecifyMove	Move Direction / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis Specify Move
DirectionVecX	Double		Move Direction / Specify Vector / X
DirectionVecY	Double		Move Direction / Specify Vector / Y
DirectionVecZ	Double		Move Direction / Specify Vector / Z
DirectionMoveX	Double		Move Direction / Specify Move / X
DirectionMoveY	Double		Move Direction / Specify Move / Y
DirectionMoveZ	Double		Move Direction / Specify Move / Z
AxisRotate	String		Rotation Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Rotation Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Rotation Axis / Axis Vector / X
AxisVecY	Double		Rotation Axis / Axis Vector / Y
AxisVecZ	Double		Rotation Axis / Axis Vector / Z
AxisPosX	Double		Rotation Axis / Axis Center / X
AxisPosY	Double		Rotation Axis / Axis Center / Y
AxisPosZ	Double		Rotation Axis / Axis Center / Z
MoveType	Flag	0 or Parallel 1 or Rotation 2 or Constraint	Move type Parallel move Rotation move Move by positional relations
MethodType	Flag	0 or SpecifyMove 1 or SelectReference	Method type Specify move Select reference
Reference	String		Reference geometry
Measurement	String		Measurement geometry
Distance	Double		Distance
DistanceReverse	bool		Distance / Reverse
Angel	Double		Angle
AngleReverse	bool		Angle / Reverse
ConstraintList	groupvector		Positional relations

Solid Circular Pattern(SolidCircularPattern)

These properties to be used in the SolidCircularPattern class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Merge	bool		merge
Reverse	bool		reverse
Axis	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
Solid	stringlist		Solid
Feature	stringlist		feature
OverlappedAreaError	bool		overlapped area error
Instance	Flag		instance
Angle	Double		angle
MergeAxis	bool		merge axis

Spiral Path(SpiralPath)

These properties to be used in the SpiralPath class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
ToBeam	bool		To Beam
Suppress	bool		Suppress feature
Visible	bool		visible
Axis	String		Axis / Edge Id
AxisType	Flag	0 or SelectEntity 1 or SpecifyVector 2 or DefaultX 3 or DefaultY 4 or DefaultZ	Axis / Coil End Type Select Entity Specify Vector X-Axis Y-Axis Z-Axis
AxisVecX	Double		Axis / Axis Vector / X
AxisVecY	Double		Axis / Axis Vector / Y
AxisVecZ	Double		Axis / Axis Vector / Z
AxisPosX	Double		Axis / Axis Center / X
AxisPosY	Double		Axis / Axis Center / Y
AxisPosZ	Double		Axis / Axis Center / Z
Start	String		Start / Start Position
StartType	Flag	0 or SelectEntity 1 or SpecifyPosition 2 or DefaultOrigin	Start / Coil End Type Select Entity Specify Position Default Origin
StartPosX	Double		Start / X
StartPosY	Double		Start / Y
StartPosZ	Double		Start / Z
RadiusOffset	Double		R offset
ThetaOffset	Double		θ offset
HeightOffSet	Double		height offSet
PitchType	Flag	0 or PitchAndNumberOfTurns 1 or PitchAndRotationAngle	pitch type pitch and number of turns pitch and rotation angle
Pitch	Double		pitch
NumberOfTurns	Double		number of turns
RotationAngle	Double		rotation angle
ReverseSpiral	bool		Spiral is reversed

Sweep Cut(SweepCut)

These properties to be used in the SweepCut class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
PathId	String		path id
UseFillet	bool		Use Fillet
FilletRadius	Double		Fillet Radius
UseTwist	bool		Use Twist
TwistAngleType	Flag		Twist Angle Type
TwistAngle	Double		twist angle
TwistPitch	Double		Twist Pitch
TwistNumberOfTurns	Double		Twist Number Of Turns

Sweep(SweepSolid)

These properties to be used in the SweepSolid class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Merge	bool		merge
MergeSameSurface	bool		Same surface merge option
PathId	String		path id
UseFillet	bool		Use Fillet
FilletRadius	Double		Fillet Radius
UseTwist	bool		Use Twist
TwistAngleType	Flag		Twist Angle Type
TwistAngle	Double		twist angle
TwistPitch	Double		Twist Pitch
TwistNumberOfTurns	Double		Twist Number Of Turns

Sweep Split(SweepSplit)

These properties to be used in the SweepSplit class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
PathId	String		path id
UseFillet	bool		Use Fillet
FilletRadius	Double		Fillet Radius
UseTwist	bool		Use Twist
TwistAngleType	Flag		Twist Angle Type
TwistAngle	Double		twist angle
TwistPitch	Double		Twist Pitch
TwistNumberOfTurns	Double		Twist Number Of Turns

Sweep Surface(SweepSurface)

These properties to be used in the SweepSurface class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Merge	bool		merge
PathId	String		path id
UseFillet	bool		Use Fillet
FilletRadius	Double		Fillet Radius
UseTwist	bool		Use Twist
TwistAngleType	Flag		Twist Angle Type
TwistAngle	Double		twist angle
TwistPitch	Double		Twist Pitch
TwistNumberOfTurns	Double		Twist Number Of Turns

Edge Chamfer(EdgeChamfer)

These properties to be used in the EdgeChamfer class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Reverse	bool		Reverse
Target	stringlist		Target
Length	Double		length
Angle	Double		Angle

Edge Fillet(EdgeFillet)

These properties to be used in the EdgeFillet class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress
Target	stringlist		Target
Radius	Double		Radius

User Defined Solid Template(UserDefinedSolidTemplate)

These properties to be used in the UserDefinedSolidTemplate class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
Suppress	bool		Suppress feature
Script	String		script

Vertices Path(VerticesPath)

These properties to be used in the VerticesPath class.

Property (propName)	Type (Type)	Flag (scriptKeyName)	Description
Name	String		Name of item
ToBeam	bool		To Beam
Suppress	bool		Suppress feature
Visible	bool		visible
Vertices	stringlist		vertices to connect
SmoothConnect	bool		Smooth Connect
ConnectStartAndEnd	bool		Connect Start And End
RemoveOwnerGeometry	bool		Remove Vertex Owner Geometry