MBD
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-044] WFSM_01
Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 3
-
[RTML-042] SynRM_01 3-phase
Type: SynRM | Max Power: 0.01(kW) | Stator(Outside Diameter): 150(mm) | Height: 37.5(mm) | Voltage/Current: DC288(V)/5(A) | Rotor/Mover: RM | Average torque: 0.8(N·m)
-
[RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)
-
How to Leverage JMAG-RT for MBD and Its Prospects
Shingo Soma, Honda Motor Co., Ltd
-
Ultra-high Fidelity Hardware in the Loop (HIL) Simulation for EV Motor Drives with Seamless Integration with JMAG-RT
Petar Gartner/Ivan Celanovic, Typhoon HIL, Inc
-
RecurDyn Dynamic Simulation of Drivetrain System with Electric Motors
June Seo, FunctionBay, Inc
-
[JAC231] Vector Control Simulation of a Synchronous Reluctance Motor
In this example, circuit simulation is carried out simulating the control of current and speed by loading a JMAG-RT model for a SynRM into a control/circuit simulator. In addition…
-
[JAC230] 6-Phase SPM Motor Inverter Fault Simulation
In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.
-
[JFT109] Comparing Efficiency Maps and Loading External Data
Using a JMAG-Designer efficiency map study, this document describes the method for creating efficiency maps with external data as output and confirming the differences between tho…
-
Initiatives in Toyota Vehicle Electrification and Developing Electrified Vehicles: Anticipating JMAG’s Support in the Development of Electrified Vehicles
Hideto Hanada, TOYOTA MOTOR CORPORATION
-
Case Study of Developing an IPM Motor Drive System with Model-Based Development (MBD) – Using JMAG-RT and HILS –
Daisuke Mitsuoka, Shimadzu Corporation
-
Fuel Consumption Simulations for Vehicles Equipped with HUB Bearings with Motor Generator (eHUB)
Mitsuo Kawamura, NTN Corporation
-
Agile Electrical Machine Development for Hybrid Electric Aircraft
Zoltán Nádudvari, Rolls-Royce Electric Hungary Kft
-
[W-MB-102] Motor Efficiency Map Evaluation for Model-Based Development (MBD) Using FEA Simulation
In MBD, it is necessary to evaluate devices characteristics without having to wait for the manufacturing of a prototype.
-
[L-MU-110] Reaching Steady-State at an Early Stage Using a Control Circuit Containing a JMAG-RT Model
Many motor performance evaluations are performed at steady-state. If transients occur during control/circuit coupling, it is necessary to calculate the number of electrical angle …
-
[L-MO-115] Performance Evaluation of Induction Motors Using Efficiency Maps
To analyze an induction motor's maximum efficiency, the voltage and slip is varied to find the combination with the highest efficiency.
