Last Updated:2019-02-13
Analysis Conditions ｜ Analysis Results ｜ Analysis Templates ｜ Circuits ｜ Geometry ｜ JMAG-RT ｜ Materials ｜ Meshing ｜ Parametric Analysis, Optimization ｜ Projects, Models, Basic Settings ｜ Running Analysis ｜ Scripts ｜ Tools ｜ User subroutine
Analysis Conditions
This document contains sample data and operation procedures for learning about external solver coupling conditions and procedures for two-way coupled analysis with STAR-CCM+.
This document presents the procedure for two way coupled analysis considering thermal fluid by using JMAG and STAR-CCM+.
This document shows how to set the eccentricity to account for the moving part’s axis remaining parallel to the central axis while moving from the initial position and afterwards.
This document shows setting to move the rotation axis in parallel.
This document shows setting to tilt the motion region axis.
This document shows setting to tilt the rotation axis.
In this document, obtaining steady-state in less time steps using TP-EEC function will be presented.
In this document, how to group FEM coil conditions and associate them with macro component wave windings is explained.
This document explains methodology for motor vibration analysis accounting for 2D step skew.
In this document, how to perform parametric analysis on a motor with the number of poles and the number of slots as design variables is presented.
This document explains methods for setting coils using the winding editor.
This document describes methods for creating an efficiency map using a JMAG-Designer efficiency map study (accuracy priority).
This document describes how to create efficiency maps using a JMAG-Designer efficiency map study (prioritizing speed).
This document describes methods for accounting for stress distribution with CSV file.
Analysis Results
In this document, the procedure for evaluating iron loss distribution for the thickness direction of steel sheets is presented.
This document shows how to define any cross section, using that defined cross section and settings to calculate physical amounts, and how to confirm results.
This document shows how to display output results ij vector form using the Fourier transform calculation function.
In this document, the procedure for displaying the correlation between two physical quantities on a graph is presented.
This document shows how to display the distribution difference contour plot using the result difference calculation function.
In this document, how to define an expression of an output and how to display its contour plot is described.
In this document, how to use the skew graph function is described.
This document shows how to display output results in contour form using the Frequency filter calculation function.
In this document, from the electromagnetic force analysis results obtained in JMAG, the procedure to check the spatial modes of force acting on a stator using a radar graph is presented.
Analysis Templates
This document shows how to inherit conditions and materials using an analysis template.
In this document, how to set analysis groups using an analysis template is explained.
In this document, the method for inheriting the magnetization direction of a magnet using an analysis template is detailed.
Circuits
In this document, how to use the Brush / Commutator component is described.
This document explains how to use harmonic current waveforms in magnetic field analyses when obtained from running circuit simulation using plant models (JMAG-RT models).
This document explains how to specify a dq axis current and drive a motor.
This document describes how to calculate the harmonic loss of a current controlled (PWM controlled) PM motor at a high speed using JMAG-RT models.
This document describes methods for creating user-defined calculation components.
In this document, how to calculate the harmonic loss of a current controlled (PWM controlled) motor is described.
Geometry
This document contains sample data and the operation procedures for learning how to use the sweep function.Sweep is a function to push out the cross-section geometry along a path.
This document describes how to create a 3D geometry by using the Loft function.
This document shows how to create many wires at once using the wire template.
This document shows how to create distributed winding coils using a coil template.
In this document, the procedure for removing the overlapping sections of two solids is described.
In this document, the procedure for registering geometry and using the registered geometry is described.
In this document, how to create a motor geometry using pre-installed stator and rotor geometries is presented.
This document contains sample data and operation procedures for learning how to use direct modeling.
Creating line segments and curves that make up a geometry using functions is sometimes desired. JMAG has functions to create models using functions when creating geometries.In this document, a method to perform geometry creation automatically using …
When creating an analysis model for an electrical device, there are times when a model creator wishes to create geometries with user-defined functions and convert them into templates for generalization. In JMAG, templates can be created using Python.
JMAG-RT
This document contains sample data and operation procedures for learning how to use the “User-defined physical quantities output from JMAG-RT” function.
This document shows how to generate a JMAG-RT model of a wound-field synchronous motor and how to execute control simulation using a JMAG-RT model in MATLAB/Simulink.
Materials
This document describes how to set a magnet material with coercive force and residual magnetic flux density taking into account temperature dependence.
Meshing
This document contains sample data and operation procedures for learning how to use the air mesh element size control function.
This document describes how to control the mesh generation method for each part by using the extruded direction function.
Projects, Models, Basic Settings
In this document, the procedure for exporting 1 study is presented.
This document demonstrates how to inherit settings for CAD files when updating them using a script that assumes when to use optimization tools.
Parametric Analysis, Optimization
This document shows the procedure of advance preparation using select parameters.
This document shows the procedure of advance preparation using select parameters.
This document shows the procedure of advance preparation using materials.
This document shows the procedure of advance preparation using point sequences.
This document shows the procedure to set a dimension as a design parameter in advance preparation.
This document shows the procedure of advance preparation using an equation for dimensions.
This document describes the procedure for setting response data and the procedure for generating response graphs from response data.
This document describes how to run topology optimization using JMAG.
In the parametric analysis of geometry and optimization calculations, there is a demand for parameters to be set accordance with part geometry. By using measurement variable in JMAG, it is possible to run parametric analyses and optimization calcula…
Running Analysis
This document shows how to set SSH on a local machine, how to execute on the local machine and how to import results from a remote machine to the local machine.
In this document, how to set pre-post and solver parallel distributed processing is explained.
Scripts
This document contains sample data and operation procedures for learning how to use the “Rotation pattern coil setting” script.
This document contains sample data and operation procedures for learning how to use the “Rotation pattern coil setting” script.
This document contains sample data and operation procedures for learning how to use the pre-installed “Synchronous motor efficiency map calculation” script.
This document contains sample data and operation procedures for learning how to use the coefficient of electrostatic capacitance calculation function.
This document describes how to set the FEM conductor conditions collectively for many wires using a script pre-installed in JMAG.
In this document, a script is introduced that automatically executes a MATLAB code file from MATLAB, displays the results in MATLAB after launching JMAG-Designer, and then closes JMAG-Designer.
In this document, sample data and a procedure are presented for learning how to use a teeth excitation force script and a torque ripple output script.
Tools
This document shows how to export one physical quantity from JMAG using a multi-purpose file export tool.
In order to perform multiphysics analysis, it is necessary to output JMAG data in the data format of the destination software. A multi-purpose file export tool is available as a way to pass physical quantities from JMAG to software used in other dom…
This document explains how to process actual measured hysteresis curves using the hysteresis curve creator tool.
User subroutine
This document is a tutorial on how to set new functions and write user subroutines.
This document describes the method for analyzing variable magnets using subroutines.
