RT
Behavior Model Generation for Use in a Circuit/Control Simulator
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[RTML-006] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[RTML-011] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 25(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.7(N·m)
-
[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…
-
[JAC230] 6-Phase SPM Motor Inverter Fault Simulation
In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.
-
[RTML-024] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 24(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 22(N·m)
-
[RTML-016] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 106(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
[RTML-014] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 120(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(flat) | Average torque: 23(N·m)
-
[RTML-003] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 36(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-010] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 27(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[RTML-007] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 20(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
The Role of JMAG on Powertrain Development
Albert Li, Gogoro Inc.
-
[RTML-008] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 22(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[RTML-002] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 54(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
