Behavior Model Generation for Use in a Circuit/Control Simulator
[JFT143] How to Run Control Simulations Using Only JMAG-RT and a Circuit
This document describes the method for creating an integration study to run a control simulation in JMAG.
[JFT149] How to Create JMAG-RT Model with JMAG Designer and Run Consecutive Control Simulation
This document explains the procedure on how to create a JMAG-RT model in JMAG-Designer and how to use the created model to run consecutive control simulation.
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
Model Based Development of Dual Inverter with JMAG-RT Model and Motor HILS
Takahiro Yamada, MIRISE Technologies Corporation
Motor Drive Verification Using HILS Implemented with JMAG-RT Models
Masamichi Inoue, Mitsubishi Electric Corporation
Vibration Prediction of Permanent Magnet Synchronous Motors by Aid of JMAG
Toru Mizota, YANMAR HOLDINGS CO., LTD.
[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: IPM (Vshaped) | Average torque(N·m): 23
[JFT154] Automatic Generation of Motor Thermal Analysis Model of Rotating Machine that Accounts for Cooling
This document shows how to run scripts from a JMAG project file with any model to create a thermal analysis model with batch settings of circuit components and each thermal condit…
[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor
In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…
[JFT011] Tooth Electromagnetic Force Monitoring During Control Simulation
This document describes the preparation involved for outputting tooth electromagnetic force when creating a JMAG-RT model, MATLAB/Simulink settings, and the displaying of the obta…
[RTML-043] SRM_01 3-phase
Type: Generic | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage/Current: DC150(V) | Rotor/Mover: RM
[RTML-050] PMSM/IPM 3-Phases Delta
Type: Generic | Power: 150(W) | Stator(Outside Diameter): 112(mm) | Height: 65(mm) | Voltage/Current: DC24(V)/4(A) | Rotor/Mover: IPM
[RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 6
[RTML-038] IM Constant rating 10(kW)
Type: IM | Max Power: 10k | Stator(Outside Diameter): 500(mm) | Height: 300(mm) | Voltage/Current: DC500(V)/250(A) | Rotor/Mover: Cage