Available in MATLAB version R2021a and later.
Features and principal use
Slim type, Power source for middle-size equipment
Geometry display on JMAG-Express
Type
Model | 10k_D_C_S |
---|---|
Model name | PMSM |
Max. Power | 10(kW) |
Voltage/Current | DC240(V)/60(A) |
Number of Poles | 10 |
Number of Slots | 15 |
Number of Phases | 3 |
Rotor | SPM |
Stator (Outside Diameter) | 185(mm) |
Stator (Inside Diameter) | 105(mm) |
Stator | Concentrated winding |
Number of Turns | 18 |
Height | 24(mm) |
Magnet | Neodymium sintered |
Inertia Moment | 1.99e-3(kg·m^2) |
Mass | 7.08(kg) |
Max. Current | 84.8(Apeak) |
Calculation results of JMAG-Designer
Average torque(N·m) | 22(N·m) |
---|---|
Ld | 0.23(mH) |
Lq | 0.31(mH) |
Inductance | 0.22(mH) |
Torque constant | 0.267(N·m/A) |
Result display on JMAG-RT Viewer Type3
Calculation condition of efficiency map using JMAG-RT Viewer
– Motor Control
Max.Speed | 8000(r/min) |
---|---|
Control Type | Max. Power |
– Inverter
Max.Voltage | 240(V) |
---|---|
Max.Current | 84.8(Apeak) |
Efficiency | Operating range |
---|---|
not less than 90% | 89.6(%) |
not less than 80% | 94.9(%) |
not less than 70% | 96.7(%) |
not less than 60% | 97.5(%) |
not less than 50% | 97.9(%) |
* Iron Loss is accounted.