DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Research the Heavy Rare Earth-Free Motor for Hybrid Vehicle
Shingo Soma, Honda R&D Co., Ltd.
-
[RTML-006] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…
-
[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[RTML-011] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 25(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.7(N·m)
-
[RTML-024] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 24(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 22(N·m)
-
Development of Measurement Method of Three-dimensional Demagnetization Distribution in Permanent Magnets for Motors
Shintaro Araki, Technology Research Association of Magnetic Materials for High-Efficiency Motors (MagHEM)
-
[RTML-016] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 106(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
[JAC230] 6-Phase SPM Motor Inverter Fault Simulation
In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.
-
[JFT066] Coil Settings Using Winding Editor
This document explains methods for setting coils using the winding editor.
-
[RTML-003] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 36(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[JFT041] Simple Skew Analysis Using Results Data
In this document, how to use the skew graph function is described.
-
[RTML-014] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 120(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(flat) | Average torque: 23(N·m)
-
[JFT002] Geometry Parametric Analysis Using Direct Modeling
In this document, how to perform geometry parametric analysis using direct modeling is presented.
-
Predicting Electromagnetic Pump Operation Using a Simulink-JMAG Coupled Analysis
Kiyoto Matsumoto, IWAKI CO., LTD.
-
[RTML-010] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 27(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)