Circuit / Control
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[W-MO-114] Comparison of Efficiency Map with Measurement
This document compares an efficiency map obtained with simulations with an efficiency map consisting of actual measurements, achieving an error of 1% or less for entire regions.
-
[RTML-038] IM Constant rating 10(kW)
Type: IM | Max Power: 10(kW) | Stator(Outside Diameter): 500(mm) | Height: 300(mm) | Voltage/Current: DC500(V)/250(A) | Rotor/Mover: Cage
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[RTML-045] LSM_01
Type: LSM | Max Power: 2(kW) | Voltage: DC400(V) | Rotor/Mover: SPM
-
[RTML-028] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 340(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 178(N·m)
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[RTML-046] ALTERNATOR_01
Type: ALTERNATOR | Stator(Outside Diameter): 140(mm) | Height: 45(mm) | Voltage: DC200(V) | Rotor/Mover: WF
-
JMAG-RT Case Studies Using 3D Analysis
Natsumi Tamura, Mitsuba Corporation
-
[RTML-043] SRM_01 3-phase
Type: SRM | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage: DC150(V) | Rotor/Mover: RM
-
[RTML-036] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 63(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 179(N·m)
-
[RTML-039] SOLENOID_01
Type: SOLENOID | Voltage: DC12(V)
-
[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor
This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …
-
[RTML-029] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW)| Stator(Outside Diameter): 250(mm) | Height: 287(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 178(N·m)
-
[RTML-042] SynRM_01 3-phase
Type: SynRM | Max Power: 0.01(kW) | Stator(Outside Diameter): 150(mm) | Height: 37.5(mm) | Voltage/Current: DC288(V)/5(A) | Rotor/Mover: RM | Average torque: 0.8(N·m)
