Available in MATLAB version R2021a and later.
Features and principal use
Slim type, Power source for large-size equipment
Geometry display on JMAG-Express
Type
Model | 100k_D_C_S |
---|---|
Model name | PMSM |
Max. Power | 100(kW) |
Voltage/Current | DC500(V)/400(A) |
Number of Poles | 12 |
Number of Slots | 18 |
Number of Phases | 3 |
Rotor | SPM |
Stator (Outside Diameter) | 400(mm) |
Stator (Inside Diameter) | 260(mm) |
Stator | Concentrated winding |
Number of Turns | 6 |
Height | 63(mm) |
Magnet | Neodymium sintered |
Inertia Moment | 2.03e-1(kg·m^2) |
Mass | 77.61(kg) |
Max. Current | 283(Apeak) |
Calculation results of JMAG-Designer
Average torque(N·m) | 179(N·m) |
---|---|
Ld | 0.07(mH) |
Lq | 0.10(mH) |
Inductance | 0.06(mH) |
Torque constant | 0.631(N·m/A) |
Result display on JMAG-RT Viewer Type3
Calculation condition of efficiency map using JMAG-RT Viewer
– Motor Control
Max.Speed | 9000(r/min) |
---|---|
Control Type | Max. Power |
– Inverter
Max.Voltage | 500(V) |
---|---|
Max.Current | 283(Apeak) |
Efficiency | Operating range |
---|---|
not less than 90% | 86.8(%) |
not less than 80% | 93.6(%) |
not less than 70% | 95.9(%) |
not less than 60% | 97.2(%) |
not less than 50% | 98.0(%) |
* Iron Loss is accounted.