[JAC211] IPM Motor Wire Joule Loss Analysis

In this example, evaluation of coil joule loss that includes eddy currents during motor rotation is introduced here.

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field

[RTML-006] PMSM/SPM Constant rating 1(kW) 3-phase

Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)

• Applications: Motor and SPM Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase

Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-011] PMSM/IPM Constant rating 1(kW) 3-phase

Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 25(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.7(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT

This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…

• Applications: Linear Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC230] 6-Phase SPM Motor Inverter Fault Simulation

In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.

• Applications: Motor and SPM Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-024] PMSM/SPM Constant rating 10(kW) 3-phase

Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 24(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 22(N·m)

• Applications: Motor and SPM Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

Development of Measurement Method of Three-dimensional Demagnetization Distribution in Permanent Magnets for Motors

Shintaro Araki, Technology Research Association of Magnetic Materials for High-Efficiency Motors (MagHEM)

• Applications: IPM Motor, Magnet, and Motor
• Physical Phenomena: Magnetic Field and Material

[RTML-016] PMSM/IPM Constant rating 10(kW) 3-phase

Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 106(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-014] PMSM/IPM Constant rating 10(kW) 3-phase

Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 120(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(flat) | Average torque: 23(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JFT041] Simple Skew Analysis Using Results Data

In this document, how to use the skew graph function is described.

[RTML-003] PMSM/SPM Constant rating 1(kW) 3-phase

Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 36(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)

• Applications: Motor and SPM Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JFT066] Coil Settings Using Winding Editor

This document explains methods for setting coils using the winding editor.

Predicting Electromagnetic Pump Operation Using a Simulink-JMAG Coupled Analysis

Kiyoto Matsumoto, IWAKI CO., LTD.

• Applications: Linear Solenoid / Linear Actuator
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: Multiphysics

[JFT002] Geometry Parametric Analysis Using Direct Modeling

In this document, how to perform geometry parametric analysis using direct modeling is presented.

• Technical Themes: Design Exploration / Optimization

[JAC154] Calculation of Equivalent Circuit Parameters in a Three-Phase Induction Motor

This Application Note explains how to obtain the secondary resistance, leakage inductance, and excitation inductance of an induction motor when its power supply frequency has been…

• Applications: Induction Motor and Motor
• Physical Phenomena: Magnetic Field