RT
Behavior Model Generation for Use in a Circuit/Control Simulator
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor
In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…
-
[RTML-025] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 259(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 178(N·m)
-
Electromagnetic Force Analysis of Permanent Magnet Synchronous Motor Driven by PWM Inverter
Katsuhiro Hoshino, Hitachi Automotive Systems, Ltd.
-
Vibration Prediction of Permanent Magnet Synchronous Motors by Aid of JMAG
Toru Mizota, YANMAR HOLDINGS CO., LTD.
-
Fuel Consumption Simulations for Vehicles Equipped with HUB Bearings with Motor Generator (eHUB)
Mitsuo Kawamura, NTN Corporation
-
[RTML-034] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 89(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 178(N·m)
-
[RTML-035] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 81(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 179(N·m)
-
[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
Case Study of Developing an IPM Motor Drive System with Model-Based Development (MBD) – Using JMAG-RT and HILS –
Daisuke Mitsuoka, Shimadzu Corporation
-
[RTML-032] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 177(N·m)
-
Low Oscillation Actuator for Force-controlled Medical Robot Arm
Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.
-
[RTML-038] IM Constant rating 10(kW)
Type: IM | Max Power: 10(kW) | Stator(Outside Diameter): 500(mm) | Height: 300(mm) | Voltage/Current: DC500(V)/250(A) | Rotor/Mover: Cage
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)
-
Agile Electrical Machine Development for Hybrid Electric Aircraft
Zoltán Nádudvari, Rolls-Royce Electric Hungary Kft
-
[RTML-045] LSM_01
Type: LSM | Max Power: 2(kW) | Voltage: DC400(V) | Rotor/Mover: SPM
