Available in MATLAB version R2021a and later.
Features and principal use
Slim type, Power source for large-size equipment
Geometry display on JMAG-Express
Type
| Model | 100k_D_D_I- |
|---|---|
| Model name | PMSM |
| Max. Power | 100(kW) |
| Voltage/Current | DC500(V)/400(A) |
| Number of Poles | 12 |
| Number of Slots | 72 |
| Number of Phases | 3 |
| Rotor | IPM |
| Stator (Outside Diameter) | 400(mm) |
| Stator (Inside Diameter) | 260(mm) |
| Stator | Distributed winding |
| Number of Turns | 3 |
| Height | 65(mm) |
| Magnet | Neodymium sintered |
| Inertia Moment | 1.39e-1(kg·m^2) |
| Mass | 62.95(kg) |
| Max. Current | 283(Apeak) |
Calculation results of JMAG-Designer
| Average torque(N·m) | 177(N·m) |
|---|---|
| Ld | 0.19(mH) |
| Lq | 0.34(mH) |
| Inductance | 0.18(mH) |
| Torque constant | 0.626(N·m/A) |
Result display on JMAG-RT Viewer Type3
Calculation condition of efficiency map using JMAG-RT Viewer
– Motor Control
Max.Speed9000(r/min)Control TypeMax. Power
– Inverter
| Max.Voltage | 500(V) |
|---|---|
| Max.Current | 283(Apeak) |
| Efficiency | Operating range |
|---|---|
| not less than 90% | 84.1(%) |
| not less than 80% | 92.8(%) |
| not less than 70% | 95.6(%) |
| not less than 60% | 97.2(%) |
| not less than 50% | 98.1(%) |
* Iron Loss is accounted.
