Circuit / Control
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Model-Based Design Meets FEA Simulation – Improving Motor Control Development using High Fidelity Motor Models
Tony Lennon, The MathWorks, Inc.
-
Attraction force analysis of a solenoid valve and system control simulation
Yusaku Suzuki, JSOL Corp.
-
[JAC216] Simulation of a Claw-Pole Type Alternator Using a Control Simulator and JMAG-RT
In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.
-
Utilization of JMAG-RT Using Multi-Case Parallel Calculation
Tomoya Ueda, NIDEC CORPORATION
-
Improvements of JMAG-RT Model of Induction Motors in Automotive Traction Drive
Akira Chiba, Tokyo Institute of Technology
-
Electric Drives for Off-Road Mobile Equipment
Jim Shoemaker, John Deere
-
Development of JMAG for Model Based Design
Hiroyuki Sano, JSOL Corp.
-
[JAC231] Vector Control Simulation of a Synchronous Reluctance Motor
In this example, circuit simulation is carried out simulating the control of current and speed by loading a JMAG-RT model for a SynRM into a control/circuit simulator. In addition…
-
[JAC166] Line Start Simulation of an Induction Machine Using a Control Simulator and the JMAG-RT
This Application Note explains how to use the JMAG-RT to create a JMAG-RT model of an induction motor, import it to a circuit/control simulator, and run an induction motor line st…
-
[JAC011] Pull-in/pull-out Analysis of a PM Stepper Motor Using a Control Simulator and the JMAG-RT
This note presents how JMAG-RT can be used to calculate holding torque and coil inductance that varies with current. The result is the JMAG-RT motor model used as a reference for …
-
High-precision HILS Solution for EV/HEV Control Development (JMAG-RT Support, Spatial Harmonic Model)
Koji Fukusumi, dSPACE Japan K.K.
-
Implementation and Case Study of High Performance/Low Cost Motor HILS using JMAG-RT
Shusaku Hayakawa, National Instruments Japan Corporation
-
Analysis of transformer circuit considered the mutual inductance
Hiroshi Goto, Toshiba industrial products and systems corporation
-
Magnet temperature analysis and prototype verification in permanent magnet synchronous motor
Ken Takeda, AISIN AW Co.,LTD.
-
[RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
Ideal to Electrical Implementation: SaberRD & JMAG-RT Case Study in a Motor Drive System
Kurt Mueller, Synopsys, Inc.