Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
-
[W-SE-101] Detailed Eddy Current Analysis of End Winding with Parallel Processing
To accurately obtaining the end-winding eddy current loss at high rotation speed, the influence of the magnetic field flux generated by the eddy current flow in every part of the …
-
Three-Phase Induction Motor Design with JMAG-Express
Motor Design with JMAG-ExpressHandy features are constantly added in our motor design tool, JMAG-Express. This article will use three-phase induction motors as an example and intr…
-
Arc Plasma Interruption Process Modeling in Electromagnetic Relays Based on JMAG and ANSYS Fluent
Shuichi Itoda, OMRON Corporation
-
[RTML-035] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 81(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 179(N·m)
-
[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
[JAC008] Analysis of an Axial Gap Motor
In this example, how to use JMAG's 3D magnetic field analysis to carry out a load analysis of an axial gap motor, and then obtain the Torque-Speed curve and the Torque-Current cur…
-
A Temperature Prediction Technique of Motors by the Combination Between Harmonic Loss Simulation by JMAG-Designer and Thermal Simulation by FloTHERM.
Manabu Kawaji, Aisin Seiki Co., Ltd.
-
Electric Motor Technology Research Center, Taiwan National Cheng Kung University
Electric Motor Technology Research Center, Taiwan National Cheng Kung University
Use of JMAG in Renewable Energy Research -
[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
Starting With Vibration Noise Analyses Vol. 1 (Motor Edition 1)
Motor Development Using JMAGVibration noise has become an unavoidable issue when dealing with electrical equipment in recent years and it seems magnetic circuit designers are some…
-
[W-MB-66] Accuracy Improvements in the JMAG-RT Induction Machine Model
In this paper, improvements in the accuracy of induction machine plant models when applied to automobile drive motors are discussed.
-
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
-
[RTML-032] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 177(N·m)
-
[JAC017] Inductance Analysis of an IPM Motor
This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.
-
Cooperation analysis of optimization and quality engineering by modeFRONTIER and JMAG
Manabu Kawaji, AISIN SEIKI Co.,Ltd.
