Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Low Oscillation Actuator for Force-controlled Medical Robot Arm
Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.
-
Development of Control Circuit Model for Multi Injection Solenoid Valve Motion Prediction
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
[JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss
In this example, an IPM motor efficiency map that accounts for AC loss from a PWM is created, and a comparison with an efficiency map that does not account for AC loss is performe…
-
[JAC104] Thrust Force Analysis of a Linear Induction Motor
This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.
-
[W-OP-96] Necessity of GA for Multi-Objective Optimization of Drive Motor
In this paper, the multi-objective optimization calculation has 12 design variables (8 geometric variables, 4 circuit variables) with 6 objective functions (maximize torque, minim…
-
Issue 1 Why have a JMAG Motor Design Course
Motor Design CourseMany JMAG Newsletter readers have expressed an interest in motor design, so we decided to do a series on the subject from this issue. But, having said that, we'…
-
[W-OP-166] Sensitivity Study of Configuration of Large Scale Multi-Objective Optimization of a PMSM
The feasible solution space of large scale multi-objective optimization schemes is sensitive to the configuration (population size, objectives, constraints, and design variables).
-
[W-SE-145] Highly Parallel Solver Performance Evaluation (Induction Heating)
This document uses as an example an induction heating model to evaluate the performance of the highly parallel solver. As a result, it was found that even in thermal-magnetic fiel…
-
[W-OP-165] Solving Geometry Conflicts in GA Optimizations with Large Numbers of Geometric Parameters
Genetic Algorithm (GA) based optimization with finite element analysis is expected to become a solution for high performance motor designs which need to satisfy many strict requir…
-
[W-MO-114] Comparison of Efficiency Map with Measurement
This document compares an efficiency map obtained with simulations with an efficiency map consisting of actual measurements, achieving an error of 1% or less for entire regions.
-
[RTML-038] IM Constant rating 10(kW)
Type: IM | Max Power: 10(kW) | Stator(Outside Diameter): 500(mm) | Height: 300(mm) | Voltage/Current: DC500(V)/250(A) | Rotor/Mover: Cage
-
[JAC228] Induction Motor Thermal Analysis
In this example, evaluating induction motor temperature distribution.
-
[W-MA-49] Necessity and Approach of Stray Load Loss Analysis
The main components of loss depend on the operating point. One of these components is stray load loss.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)
-
[RTML-045] LSM_01
Type: LSM | Max Power: 2(kW) | Voltage: DC400(V) | Rotor/Mover: SPM
