[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation

In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field and Structural
• Technical Themes: Design Exploration / Optimization

[JFT058] Creating Efficiency Maps Using JMAG-Designer (Speed Priority Mode)

This document describes how to create efficiency maps using a JMAG-Designer efficiency map study (prioritizing speed).

• Technical Themes: Design Exploration / Optimization, Efficiency map, and MBD

[RTML-035] PMSM/IPM Constant rating 100(kW) 3-phase

Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 81(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 179(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JFT032] Evaluation Graph Displaying for Design Parameters (Parametric Analysis)

This document describes the procedure for setting response data and the procedure for generating response graphs from response data.

• Technical Themes: Design Exploration / Optimization

A Temperature Prediction Technique of Motors by the Combination Between Harmonic Loss Simulation by JMAG-Designer and Thermal Simulation by FloTHERM.

Manabu Kawaji, Aisin Seiki Co., Ltd.

• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase

Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-

This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field

[JAC017] Inductance Analysis of an IPM Motor

This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field
• Technical Themes: Multiphysics

[RTML-032] PMSM/IPM Constant rating 100(kW) 3-phase

Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 177(N·m)

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC104] Thrust Force Analysis of a Linear Induction Motor

This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.

• Applications: Linear Motor and Motor
• Physical Phenomena: Magnetic Field

Cooperation analysis of optimization and quality engineering by modeFRONTIER and JMAG

Manabu Kawaji, AISIN SEIKI Co.,Ltd.

• Applications: Linear Solenoid / Linear Actuator
• Physical Phenomena: Magnetic Field
• Technical Themes: Design Exploration / Optimization

[JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss

In this example, an IPM motor efficiency map that accounts for AC loss from a PWM is created, and a comparison with an efficiency map that does not account for AC loss is performe…

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency map

Low Oscillation Actuator for Force-controlled Medical Robot Arm

Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.

• Applications: Motor and SR Motor
• Physical Phenomena: Circuit / Control, Magnetic Field, and Structural
• Technical Themes: Design Exploration / Optimization and Multiphysics

Development of Control Circuit Model for Multi Injection Solenoid Valve Motion Prediction

Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.

• Applications: Linear Solenoid / Linear Actuator
• Physical Phenomena: Circuit / Control and Magnetic Field

[JFT049] Grouping FEM Coil Conditions

In this document, how to group FEM coil conditions and associate them with macro component wave windings is explained.

Agile Electrical Machine Development for Hybrid Electric Aircraft

Zoltán Nádudvari, Rolls-Royce Electric Hungary Kft

• Technical Themes: MBD and Multiphysics