DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-035] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 81(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 179(N·m)
-
[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
[JFT058] Creating Efficiency Maps Using JMAG-Designer (Speed Priority Mode)
This document describes how to create efficiency maps using a JMAG-Designer efficiency map study (prioritizing speed).
-
[JFT032] Evaluation Graph Displaying for Design Parameters (Parametric Analysis)
This document describes the procedure for setting response data and the procedure for generating response graphs from response data.
-
A Temperature Prediction Technique of Motors by the Combination Between Harmonic Loss Simulation by JMAG-Designer and Thermal Simulation by FloTHERM.
Manabu Kawaji, Aisin Seiki Co., Ltd.
-
[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
-
[RTML-032] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(flat) | Average torque: 177(N·m)
-
[JAC017] Inductance Analysis of an IPM Motor
This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.
-
Cooperation analysis of optimization and quality engineering by modeFRONTIER and JMAG
Manabu Kawaji, AISIN SEIKI Co.,Ltd.
-
Low Oscillation Actuator for Force-controlled Medical Robot Arm
Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.
-
Development of Control Circuit Model for Multi Injection Solenoid Valve Motion Prediction
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
[JAC104] Thrust Force Analysis of a Linear Induction Motor
This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.
-
[JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss
In this example, an IPM motor efficiency map that accounts for AC loss from a PWM is created, and a comparison with an efficiency map that does not account for AC loss is performe…
-
[JFT049] Grouping FEM Coil Conditions
In this document, how to group FEM coil conditions and associate them with macro component wave windings is explained.
-
Agile Electrical Machine Development for Hybrid Electric Aircraft
Zoltán Nádudvari, Rolls-Royce Electric Hungary Kft