Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-045] LSM_01
Type: LSM | Max Power: 2(kW) | Voltage: DC400(V) | Rotor/Mover: SPM
-
[JAC233] Induction Heating Coil Optimization
In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.
-
[JAC237] AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.
-
[JAC251] Alternator Vibration Analysis
In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…
-
[RTML-028] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 340(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 178(N·m)
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
ASTER CO., LTD.
AST motor (AST Motor™) was developed based on technology developed for AST coil (AST COIL®), an in-house manufactured product. Aster Co., Ltd. is a…
-
[RTML-046] ALTERNATOR_01
Type: ALTERNATOR | Stator(Outside Diameter): 140(mm) | Height: 45(mm) | Voltage: DC200(V) | Rotor/Mover: WF
-
KTH Royal Institute of Technology
How the department utilizes JMAG to maximize output for sensorless control operations at low speeds and combat thermal issues for PM motors.
-
JMAG-RT Case Studies Using 3D Analysis
Natsumi Tamura, Mitsuba Corporation
-
Issue 1 Efforts in JMAG for Model-based Design
Explanation: Model-based DevelopmentRecently, model-based design (development) is a term starting to be used in the development process. These reports discuss what model-based des…
-
[W-MA-67] On the Geometry Edge Effects in Laminated Steel Sheet Eddy Current Loss Analysis
In this white paper, based on the results of this analysis, the scenarios where the 2D + 1D method degrades accuracy are made clear and issues to be addressed in the future are pr…
-
[RTML-043] SRM_01 3-phase
Type: SRM | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage: DC150(V) | Rotor/Mover: RM
-
[RTML-036] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 63(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 179(N·m)
-
[RTML-039] SOLENOID_01
Type: SOLENOID | Voltage: DC12(V)
-
[L-OP-25] Utilizing JMAG in Cloud Services
More cloud services for CAE continue to be offered. This allows sufficient computational resources to be used when needed to perform analysis work.
