DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC154] Calculation of Equivalent Circuit Parameters in a Three-Phase Induction Motor
This Application Note explains how to obtain the secondary resistance, leakage inductance, and excitation inductance of an induction motor when its power supply frequency has been…
-
[RTML-007] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 20(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[JFT159] How to Create Motor Design Using Models & Scenarios
This enables you to create motor models, run analysis and evaluate the results in fewer steps.This document explains the procedure on how to create models using the templates and…
-
The Role of JMAG on Powertrain Development
Albert Li, Gogoro Inc.
-
[JAC138] Vibration Analysis of an SR Motor
This Application Note presents an example of how to obtain the electromagnetic force generated in the stator core of an SR motor and evaluate the sound pressure by linking it to t…
-
[JFT056] Using an Electromagnetic Force Output Script for NVH
This document presents sample data and procedures to learn how to use an "electromagnetic force output for NVH" script.
-
[JAC191] Torque Analysis of Three-Phase Induction Motors Accounting for the Skew Using the Multi-slice Method
In this document, the multi-slice method is used to compare torque waveforms of a cage three-phase induction motor with and without skew, and is then used to verify the effects of…
-
[JAC173] Basic Characteristic Analysis of an IPM Motor
This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.
-
[RTML-008] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 22(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
Proposal of Electromagnetic Noise-generating Mechanism on Carrier Harmonics
Yoshitake Kamijo, Toshiba Corporation
-
[RTML-002] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 54(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[JAC082] Analysis of a Synchronous Reluctance Motor
This Application Note presents an evaluation of torque variations that occur when the phase of a sinusoidal wave current is changed.
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
-
[JAC038] Starting Performance Analysis of a Single Phase Induction Motor
The purpose of this Application Note is to introduce an example of a single phase induction motor that uses a capacitor to set up an auxiliary winding and show its rotation speed …
-
Model-Based Design Meets FEA Simulation – Improving Motor Control Development using High Fidelity Motor Models
Tony Lennon, The MathWorks, Inc.