DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Structure, Characteristics and Analysis of Poly-Phase Induction Motor for Automotive Traction Applications
Akira Chiba, Tokyo Institute of Technology
-
[JAC062] Attractive Force Analysis of a Solenoid Valve
This Application Note obtains the attraction force at each position of the movable core.
-
[JAC229] Analysis of the Effect of PWM on the Iron Loss of an Induction Motor
In this example, we introduce a case study to obtain the iron losses of the induction motor that accounts for the PWM input.
-
[JAC006] Analysis of the SR Motor Torque Ripple
This Application Note explains how to carry out a torque analysis that changes the switch conversion timing and evaluate both the torque ripples and average torque in an SR motor.
-
[JAC289] Efficiency Map Creation for Wound-Field Synchronous Motors
In this example, efficiency maps for a wound-field synchronous motor are created to check the combinations of currents that result in maximum efficiency. In addition, the loss bre…
-
Application of Thin Wire of Soft Magnetic Pure Iron to AC Solenoid
Shota Iimura, KOBE STEEL, LTD.
-
[JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew
This Application Note presents a comparison of the torque waveforms of three phase squirrel cage induction motors with and without torque, and introduces the effects of using skew…
-
[JAC119] Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor
This Application Note shows how to obtain the current density distribution and slip-torque curve.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC288] Synchronous Reluctance Motor Topology Optimization
In this example, topology optimization is used to minimize the torque ripple and maximize the average torque when exploring the rotor geometry.
-
[JFT174] Workflow and Key Points of Parameter Optimization
This document is intended for intermediate-level readers who can use the technical materials to improve the accuracy and operational efficiency of the analyses that they are invol…
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JFT173] Workflow and Key Points in Efficiency Map Analysis
It is intended for intermediate-level users who are able to use technical references to improve accuracy and efficiency of their analysis. Therefore, basic information and detaile…
-
[JFT175] Workflow and Key Points of Topology Optimization
It is intended for intermediate level users who are able to use technical references to improve accuracy and efficiency in their analysis. Therefore, basic information and detaile…
