DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…
-
[JAC200] Iron Loss Analysis of IPM Motor using Hysteresis Model
In this example, a hysteresis model accounting for minor loops of the direct current bias magnetism and the lamination analysis function accounting for eddy current distribution i…
-
Enhanced 3D Finite Element Analysis of AC Losses in the End-Winding Structure of Bar Wound Windings
David Philipp Morisco, Gasoline Systems Electrical Machines, Robert Bosch GmbH / Technical University of Ilmenau
-
[RTML-027] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 181(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 178(N·m)
-
[RTML-022] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 35(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
[JFT054] Output Types for the Spatial Modes of Electromagnetic Force Using FFT
This document describes the procedure to confirm the spatial modes of the electromagnetic force acting on a stator using a radar graph from electromagnetic force analysis results …
-
[RTML-013] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 106(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 23(N·m)
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[RTML-023] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 33(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: IPM(flat) | Average torque: 23(N·m)
-
[RTML-012] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 16(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.5(N·m)
-
[RTML-009] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 14(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
Simulation of Magnetization for Anisotropic Rare-Earth Bonded Magnets
Rie Yoshida, NICHIA CORPORATION
-
[RTML-015] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 83(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 23(N·m)
-
[RTML-021] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 27(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 23(N·m)
-
[RTML-005] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 80(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[JAC211] IPM Motor Wire Joule Loss Analysis
In this example, evaluation of coil joule loss that includes eddy currents during motor rotation is introduced here.