Available in MATLAB version R2021a and later.
Features and principal use
Slim type, Power source for middle-size equipment
Geometry display on JMAG-Express
Type
| Model | 10k_D_D_S |
|---|---|
| Model name | PMSM |
| Max. Power | 10(kW) |
| Voltage/Current | DC240(V)/60(A) |
| Number of Poles | 10 |
| Number of Slots | 30 |
| Number of Phases | 3 |
| Rotor | SPM |
| Stator (Outside Diameter) | 185(mm) |
| Stator (Inside Diameter) | 105(mm) |
| Stator | Distributed winding |
| Number of Turns | 14 |
| Height | 27(mm) |
| Magnet | Neodymium sintered |
| Inertia Moment | 2.27e-3(kg·m^2) |
| Mass | 7.95(kg) |
| Max. Current | 84.8(Apeak) |
Calculation results of JMAG-Designer
| Average torque(N·m) | 23(N·m) |
|---|---|
| Ld | 0.16(mH) |
| Lq | 0.23(mH) |
| Inductance | 0.16(mH) |
| Torque constant | 0.272(N·m/A) |
Result display on JMAG-RT Viewer Type3
Calculation condition of efficiency map using JMAG-RT Viewer
– Motor Control
| Max.Speed | 8000(r/min) |
|---|---|
| Control Type | Max. Power |
– Inverter
| Max.Voltage | 240(V) |
|---|---|
| Max.Current | 84.8(Apeak) |
| Efficiency | Operating range |
|---|---|
| not less than 90% | 84.9(%) |
| not less than 80% | 92.8(%) |
| not less than 70% | 95.3(%) |
| not less than 60% | 96.8(%) |
| not less than 50% | 97.4(%) |
* Iron Loss is accounted.
