Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
“Fusion of Simulation Technology and Additive Manufacturing” (JMAG & 3D Printer)
Masaomi Kawabe, TKE Co.,Ltd.
-
Application of Thin Wire of Soft Magnetic Pure Iron to AC Solenoid
Shota Iimura, KOBE STEEL, LTD.
-
Development of Magnet Unit for the Endurance Test Equipment of Flexible Devices
Tomonori Katsuta, Industrial Technology Center of Okayama Prefecture
-
Activity in the Visualization in Non-contact Sensing for Assurance Accuracy
Yuki Sugiura, Ryo Kagiya, Tosei Engineering corp.
-
[JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew
This Application Note presents a comparison of the torque waveforms of three phase squirrel cage induction motors with and without torque, and introduces the effects of using skew…
-
[JAC001] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note introduces a case example of how to obtain the current density distribution of an auxiliary conductor and its rotation speed versus torque characteristics.
-
[JAC143] Inductance Analysis of an Air Core Coil
This analysis shows how to obtain an air core coil’s inductance through analysis and compare it with theoretical values.
-
Stray Loss Analysis of Large Power Transformer Using 3D Magnetic Field Analysis
Masaki Sakuma, Fuji Electric Co., Ltd.
-
[JAC119] Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor
This Application Note shows how to obtain the current density distribution and slip-torque curve.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC139] Power Transmission Analysis Using Magnetic Resonance Phenomena
This Application Note presents how to confirm the power transmission efficiency and the magnetic flux density distribution.
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[L-HU-168] Fast Solving of Large Scale Model Using Massive Parallel Processing
One option for accurate loss analysis is 3D analysis. However, the number of elements often reaches into the millions, limiting its use in terms of calculation cost. In order to i…
-
[JAC280] Topology Optimization of Induction Heating Coil
In this example, magnetic field and thermal coupled analysis is run, and using topology optimization, searches are performed for a heating coil that maximizes the power factor and…
-
[JAC288] Synchronous Reluctance Motor Topology Optimization
In this example, topology optimization is used to minimize the torque ripple and maximize the average torque when exploring the rotor geometry.
