MBD
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JFT069] Performing Harmonic Loss Calculations Accounting for Current Control with JMAG-Designer and JMAG-RT
In this document, how to calculate the harmonic loss of a current controlled (PWM controlled) PM motor at high speed using a JMAG-RT model is presented.
-
Implementation and Case Study of High Performance/Low Cost Motor HILS using JMAG-RT
Shusaku Hayakawa, National Instruments Japan Corporation
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
-
[RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
Ideal to Electrical Implementation: SaberRD & JMAG-RT Case Study in a Motor Drive System
Kurt Mueller, Synopsys, Inc.
-
[RTML-050] PMSM/IPM 3-Phases Delta
Type: PMSM | Power: 150(W) | Stator(Outside Diameter): 112(mm) | Height: 65(mm) | Voltage/Current: DC24(V)/4(A) | Rotor/Mover: IPM
-
2-Step Multi Objective Optimization of EV System by 1D and 3D Integration
Koichi Shigematsu, Cybernet Systems Co., Ltd.
-
JMAG solution: Higher fidelity motor HILS of FPGA-based by model-based development
Koji Fukusumi, dSPACE Japan K.K.
-
Virtual Motor bench for high bandwidth ECU testing using JMAG-RT modeling approach on a FPGA chip
Sebastien Cense, Opal-RT
-
Model Based Development and HILS for motor control development
Takashi Miyano, dSPACE JAPAN K.K.
-
High fidelity HILS and RCP for motor control development
Takashi Miyano, dSPACE Japan K.K.
-
Final Issue Model-based Development Requires the Ability to Expand, Shrink, and Share the Model
Explanation: Model-based DevelopmentThis series discusses JMAG's contributions to model-based development. Issue 1 talks about the motivation behind developing "JMAG-RT" for contr…
-
[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT
This note presents how JMAG-RT can be used to calculate attraction forces and coil inductance that varies with harmonic and current. The result is the JMAG-RT model used as a refe…
-
Model-Base Virtual Verification Method With Advanced PCB Simulation Technics
Masanari Ueda, Mentor Graphics Japan Co., Ltd.
-
[L-MU-92] JMAG/Particleworks Coupled Motor Cooling Analysis
Motor temperature control is an important issue. Due to temperature rise, demagnetization occurs in PM motor magnets leading to a loss of high efficiency.
-
[L-MO-108] Motor Performance Evaluation Considering Control
At the motor component design stage, motor performance is evaluated using an ideal sinusoidal current.
