Iron Loss Analysis / Loss Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC201] Iron Loss Analysis of an SR Motor
This example, to accurately capture iron loss that occurs in the SR motor, we will introduce hysteresis loss accounting for the hysteresis loop of the materials and the iron loss …
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
[JAC181] Analysis of SR Motor Drive Characteristics
This example presents how to confirm drive characteristics such as torque, loss, and efficiency in a motor when its switch timing changes for each rotation speed.
-
[JAC110] Loss Analysis of a Choke Coil
This Application Note shows how to obtain the iron loss and copper loss in a choke coil.
-
[JAC271] Axial Gap Type Motor AC Copper Loss Analysis
In this example, the AC copper loss of an axial gap type motor using square wire is evaluated.
-
[JAC176] Drive Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains how to confirm drive characteristics such as torque, loss, and efficiency in an induction motor when its rotation speed changes.
-
[JAC232] Reactor Joule Loss Analysis
In this example, investigating Joule loss with respect to the positions of air gaps in a reactor is presented.
-
[JAC212] AC Loss Analysis of a Claw Pole Alternator
In this example, we introduce the case study that evaluates AC losses in coils of claw pole alternator.
-
[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)
A magnetic field analysis simulation based on the finite element method (FEM) can precisely evaluate the complex loss distributions of the coil and core, so it is optimal for an a…
-
[JAC238] Hysteresis Loss Analysis in a Reactor with DC Bias
In this example, we will observe the difference between the hysteresis losses calculation method loop count and the play model for the model that is subjected to a DC bias filed o…
-
[JAC260] Creating Axial Gap-Type Motor Efficiency Maps
In this example, the motor performance of axial gap-type motors with changes made to the flatness ratios.
-
[JAC221] Confirmation of the Influence from the Reduction of High-Frequency Resistance of a Magnetically Plated Wire Choke Coil
In this example, high frequency resistance values are obtained from choke coil copper loss analysis results using JMAG’s layer coating mesh function, and the effectiveness of redu…
-
[JAC078] Loss Analysis of a Sheet Coil Transformer
This Application Note shows how to obtain the iron loss of a sheet coil transformer.
-
[JAC276] Six-Phase IPM Motor Harmonic Iron Loss Analysis
In this example, confirming the effects of carrier harmonics on the iron loss of a six-phase IPM motor are explained here.
-
[JAC146] Analysis of Stray Loss in a Transformer
This Application Note explains how to obtain losses in a transformer tank and use them to evaluate the temperature distribution in each part.
-
[JAC157] Analysis of Eddy Currents in an IPM Motor Using the Gap Flux Boundary
This Application Note explains how to use the gap flux boundary condition to evaluate the eddy current loss in the magnet by changing the number of magnet divisions. This will mak…
