Temperature Distribution Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC146] Analysis of Stray Loss in a Transformer
This Application Note explains how to obtain losses in a transformer tank and use them to evaluate the temperature distribution in each part.
-
[JAC045] High-Frequency Induction Heating Analysis of an IH Cooking Heater
This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC133] Thermal Analysis of a Three-phase Transformer
This Application Note presents an example of how to confirm a temperature distribution using the iron and copper losses of a three-phase transformer as heat sources.
-
[JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature and Stress
In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.
-
[JAC085] High-Frequency Induction Heating Analysis of a Constant Velocity Joint
This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…
-
[JAC010] Thermal Analysis of a Radiant Heater
This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…
-
[JAC013] High-Frequency Induction Heating Analysis of a Shaft
This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…
-
[JAC100] Surface Heating Analysis of a Steel Plate
This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …
-
[JAC280] Topology Optimization of Induction Heating Coil
In this example, magnetic field and thermal coupled analysis is run, and using topology optimization, searches are performed for a heating coil that maximizes the power factor and…
-
[JAC049] High-Frequency Induction Heating Analysis of a Steel Sheet
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…
-
[JAC050] High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…
-
[JAC051] High-Frequency Induction Heating Analysis of a Gear
This Application Note shows how to create a numerical analysis model when obtaining the optimum coil geometry and current conditions (power supply frequency and current value), an…
-
[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller
This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…
-
[JAC047] High-Frequency Induction Heating Analysis of a Crankshaft
This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…
-
[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress
In this example, the efficiency map, part temperature, and stress, are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explo…
