Thermal
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC304] Thermal Analysis of an Axial Flux Motor Accounting for Cooling
This case study evaluates the temperature changes of each part of an axial flux motor with and without a cooling jacket during a WLTC drive cycle.
-
A Comprehensive Overview of Excess Loss Modelling Including Skin and Thermal Effects in a Permanent Magnet Assisted Synchronous Reluctance Machine Example…
Sigrid Jacobs / Jan RENS, ArcelorMittal
-
Advanced Cooling Techniques for Automotive Electrical Machines: Thermal Modelling and Experimental Validation
FENGYU ZHANG, University of Nottingham
-
Multi-physics Design Optimization of an Externally Excited Axial Flux Machine
Martin Bruell, Schaeffler AG
-
Data-Driven Optimization of E-Machines Considering the Powertrain of Electric Vehicles
Maximilian Clauer, Dr. Ing. h.c. F. Porsche AG
-
[L-HT-217] Modeling Forced Air Cooling
This case study simulates a forced air cooling system inside an induction machine using two different types of fans. The results illustrated how different airflow rates of the fan…
-
[L-HT-210] Evaluation of Temperature Variations in Motor Parts During the Drive Cycle
OverviewMotor development must pursue a wide range of performance and other requirements from greater miniaturization, higher efficiency and heat management to reductions in costs…
-
[L-OP-190] Standalone Simulations to Evaluate Magnetic, Thermal, Structural, and Control Designs
This case study runs an optimization on the initial nabla-shaped IPM drive motor design to maximize torque and minimize magnet mass for greater fuel economy during the WLTC drive …
-
[W-MU-204] Thermal Analysis Validation with Measurements for a Water-Cooled PMSM
To solve this problem, this paper adopts a method that combines the Finite Element Analysis (FEA) and a thermal equivalent circuit.
-
[L-MB-202] Driving the Future with Precision -JMAG powers the complex motion of humanoids-
To achieve smooth and powerful motion that closely resembles the movement of human joints, including the neck, shoulders, elbows, wrists, fingers and hips it is essential to accur…
-
[JAC310] Quench Characteristics Analysis of a Pancake Superconducting Coil
This case study evaluates a pancake superconducting coil to obtain the temperature and current density variations.
-
[JAC308] Thermal Analysis of a Three-phase Induction Motor Accounting for Ventilation Cooling
This case study evaluates the temperature variations when using two different fans in an induction motor by taking into account the ventilation cooling.
-
[L-OP-187] Multi-disciplinary Evaluation for Optimal Design Without Rework
In this case study, we optimize a wound field synchronous motor (EESM) with two objective functions - average efficiency under the WLTC driving cycle and maximizing torque.
-
[L-OP-188] High-Speed Large-Scale Design Space Exploration Using Surrogate Model-Assisted Optimization
In this case study, we used JMAG to optimize the geometry of an induction heating coil with surrogate models.
-
[JAC305] Loss Analysis of IPM Motor During Driving Cycle Considering Temperature Variation
In this example, we evaluate the time variation of losses and temperature during WLTC driving cycles when using an efficiency map with temperature dependency in an IPM motor.
-
[JAC306] IPM Efficiency Map Analysis Accounting for Continuous Operation
In this example, we will create an efficiency map for an IPM motor that considers continuous operation and imposes temperature constraints on the components.
