Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Data-Driven Optimization of E-Machines Considering the Powertrain of Electric Vehicles
Maximilian Clauer, Dr. Ing. h.c. F. Porsche AG
-
Large-Scale Analysis of High-Efficiency Induction Motor for Railway Traction Applications
Hiroshi Yoda, Railway Technical Research Institute
-
Importance of Wide-Band Support in Motor Loss Evaluations – Measurements and Analyses Accounting for Ringing Loss
Masakazu Akahane, HIOKI E.E. CORPORATION / Hiroyuki Sano, JSOL Corp.
-
[L-HT-217] Modeling Forced Air Cooling
This case study simulates a forced air cooling system inside an induction machine using two different types of fans. The results illustrated how different airflow rates of the fan…
-
[L-OP-211] Offline Optimizations Using Surrogate Models
This case study runs an offline optimization to explore the optimal geometry for an axial gap motor to maximize average torque and minimize losses. A constraint condition anticipa…
-
[L-HT-210] Evaluation of Temperature Variations in Motor Parts During the Drive Cycle
OverviewMotor development must pursue a wide range of performance and other requirements from greater miniaturization, higher efficiency and heat management to reductions in costs…
-
[L-OP-190] Standalone Simulations to Evaluate Magnetic, Thermal, Structural, and Control Designs
This case study runs an optimization on the initial nabla-shaped IPM drive motor design to maximize torque and minimize magnet mass for greater fuel economy during the WLTC drive …
-
[L-HT-203] Efficiency Map Evaluations Accounting for Continuous Operation Characteristics
This case study creates an efficiency map for the continuous operation of a nabla-shaped IPM motor that takes into account the temperature constraints. The analysis shows the moto…
-
[W-MU-204] Thermal Analysis Validation with Measurements for a Water-Cooled PMSM
To solve this problem, this paper adopts a method that combines the Finite Element Analysis (FEA) and a thermal equivalent circuit.
-
[L-MB-202] Driving the Future with Precision -JMAG powers the complex motion of humanoids-
To achieve smooth and powerful motion that closely resembles the movement of human joints, including the neck, shoulders, elbows, wrists, fingers and hips it is essential to accur…
-
[JAC308] Thermal Analysis of a Three-phase Induction Motor Accounting for Ventilation Cooling
This case study evaluates the temperature variations when using two different fans in an induction motor by taking into account the ventilation cooling.
-
[L-OP-201] Storing and Reusing Simulation Data
In this case study, JMAG Design Explorer is used to reference and compare ten different optimization results for two types of motors—IPM motors and induction motors—each with diff…
-
[L-OP-187] Multi-disciplinary Evaluation for Optimal Design Without Rework
In this case study, we optimize a wound field synchronous motor (EESM) with two objective functions - average efficiency under the WLTC driving cycle and maximizing torque.
-
[JAC307] Topology Optimization of SPM Motor Using the Magnet Orientation Direction as a Design Variable
This case study runs an optimization to simultaneously explore the magnet topology and orientation directions through design variables to obtain at least the same torque as a Halb…
-
[JAC305] Loss Analysis of IPM Motor During Driving Cycle Considering Temperature Variation
In this example, we evaluate the time variation of losses and temperature during WLTC driving cycles when using an efficiency map with temperature dependency in an IPM motor.
-
[JAC306] IPM Efficiency Map Analysis Accounting for Continuous Operation
In this example, we will create an efficiency map for an IPM motor that considers continuous operation and imposes temperature constraints on the components.
