Model

[S0068] Create a multiple face reference target and set it as the reference for the surface normal direction of a superconducting material

Create a multi faces selection reference target to specify the reference surface for material properties where the reference direction changes along a curved surface.

[S0062] Export results for each element or node to a file

Select elements or nodes to output the values of the distribution results to a file in table format.

[S0061] Define cut planes of the model

Create a cut plane to view the results interior of the model.

[S0060] Create a flux line for a 3D result by specifying a face as a rendering start

Create a flux line passing through a specified plane for a 3D analysis result.

[S0047] Select faces oriented in the specified normal direction located within the cylindrical range

Specify a cylindrical region in the model coordinate space, then select faces within that region and match to the specified normal direction.

[S0046] Group the selected parts by specifying a box area

Select parts by specifying a box range in the model coordinate space and create a part group from the selected parts.

[S0041] Create composite result display definition to display multiple distribution plots on a single screen

Create a composite result definition to plot different result types or different components for each part and display on a single screen.

[S0038] Retrieve the parts and sets information of the analysis template, associate them and apply to a model

Retrieve information on parts and sets from the analysis template, including parts and sets that are not automatically associated. If the names match within certain rules, create …

[S0025] Generate a multi-layer coating mesh for the specified part

Set multi-layer coating mesh that generates layered mesh automatically on the surface of a region in the 2D analysis.

[S0021] Setup coil end cooling and set CSV output for terminal temperature

Create and link a coil end cooling component and an equivalent temperature boundary pattern (rotation) condition to model the cooling of the coils of a rotating machine.

[S0020] Create a parts set by specifying the part names

Create a part set for multiple parts specified by names.

[S0017] Create a 3-phase coil winding setting to a magnetic field analysis study using the coil winding function

Setup coil winding settings to a rotating machine model using the coil winding function. Add a winding component to the circuit, set winding areas, and set winding parameters.

[S0011] Apply heat transfer boundary condition to the part surfaces

In a thermal analysis study, apply heat transfer boundary condition to the faces defined by the set.

[S0006] Get the area or volume of a part with a specified name

Get the volume in 3D or the area in 2D of a part or parts group with specified name

[S0005] Set the orientation pattern of the magnetization material parts to a parallel pattern (circular any direction)

In a magnetic field analysis, set the orientation pattern to a parallel pattern (circular any direction) in the properties of the part with the magnetization material

[S0002] Set the rotation motion condition to all parts within a specified radius from the origin

In the model of a magnetic field analysis study, set the rotation motion condition to parts within a specified radius from the origin