TRANSFORMER_TEMPLATE
- Sort condition
- Newest first
- Oldest first
- Views
Show 1 to 10 of 10
-
[RTML-047] PMSM/IPM Constant rating 75(kW) 3-phase
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
221 – Confirmation of the Influence in the Reduction of High-Frequency Resistance of a Magnetically Plated Wire Choke Coil
In this example, high frequency resistance values are obtained from choke coil copper loss analysis results using JMAG’s layer coating mesh function, and the effectiveness of redu…
-
Detailed Evaluation of High-frequency Transformers/Reactors
Takayuki Nishio, JSOL Corp.
-
Litz Wire Analysis with JMAG
Koji Tani, JSOL Corp.
-
123 – Thermal Analysis of a Choke Coil
This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.
-
105 – Leakage Inductance Analysis of a Transformer
This Application Note explains how to obtain self-inductance and leakage inductance for two types of secondary coiling in a transformer: uniform coiling and close coiling.
-
61 – Current Distribution Analysis of a Choke Coil
This Application Note explains a case example that obtains the current distribution in a choke coil.
-
110 – Loss Analysis of a Choke Coil
This Application Note shows how to obtain the iron loss and copper loss in a choke coil.
-
101 – AL-Value Current Characteristic Analysis of a Choke Coil
This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.
-
81 – AL-value Analysis of a Choke Coil
This Application Note explains a case example that obtains the air gap versus AL characteristics of a choke coil.
Show 1 to 10 of 10
